In 2015 the U.S. Department of Energy (DOE) initiated a 4-yr study, the Second Wind Forecast Improvement Project (WFIP2), to improve the representation of boundary layer physics and related processes in mesoscale models for better treatment of scales applicable to wind and wind power forecasts. This goal challenges numerical weather prediction (NWP) models in complex terrain in large part because of inherent assumptions underlying their boundary layer parameterizations. The WFIP2 effort involved the wind industry, universities, the National Oceanographic and Atmospheric Administration (NOAA), and the DOE’s national laboratories in an integrated observational and modeling study. Observations spanned 18 months to assure a full annual cycle of continuously recorded observations from remote sensing and in situ measurement systems. The study area comprised the Columbia basin of eastern Washington and Oregon, containing more than 6 GW of installed wind capacity. Nests of observational systems captured important atmospheric scales from mesoscale to NWP subgrid scale. Model improvements targeted NOAA’s High-Resolution Rapid Refresh (HRRR) model to facilitate transfer of improvements to National Weather Service (NWS) operational forecast models, and these modifications have already yielded quantitative improvements for the short-term operational forecasts. This paper describes the general WFIP2 scope and objectives, the particular scientific challenges of improving wind forecasts in complex terrain, early successes of the project, and an integrated approach to archiving observations and model output. It provides an introduction for a set of more detailed BAMS papers addressing WFIP2 observational science, modeling challenges and solutions, incorporation of forecasting uncertainty into decision support tools for the wind industry, and advances in coupling improved mesoscale models to microscale models that can represent interactions between wind plants and the atmosphere.
WFIP2, a multi-institutional, multiscale modeling and observational study in complex terrain, advances understanding of boundary layer physics and improves forecasts for wind energy applications.
At the end of 2017, installed energy generation capacity from wind in the United States exceeded 87 GW, and wind energy is expected to exceed hydropower as the nation’s largest renewable energy source in 2019 [U.S. Department of Energy (DOE); DOE 2018a]. Wind power plants now provide more than 6% of U.S. electrical power production (DOE 2018b). With the cost of wind energy falling rapidly, that percentage is projected to increase to 20% by 2030 and 35% by 2050 (DOE 2015). At the same time, wind is a variable energy resource, and as wind’s percentage of the U.S. energy mix increases, so will the importance of accurately forecasting it in order to efficiently operate electric systems and related markets and to ensure grid reliability (Marquis et al. 2011).
Weather forecasting for wind energy suffers from several challenges. First, there has been limited validation of wind forecasts at 100 m above Earth’s surface (approximately wind turbine hub height) owing to the general lack of observations at that height. Another is that the same lack of observations inhibits initialization accuracy for forecast models. A further, and perhaps most significant, challenge is that wind power plants are frequently placed in complex terrain, creating more severe demands for model physics. Renewable energy industry experts, university researchers, and federal scientists have met regularly over the last decade to address the challenges of transitioning the power grid from conventional energy sources to renewable sources. In addition to the energy conferences at the AMS Annual Meeting and the Energy Systems Integration Group (formerly called the Utility Variable-Generation Integration Group) annual forecasting meeting, DOE has held two key workshops to identify research priorities to reduce the cost of wind power. A DOE workshop in 2008 titled “Research Needs for Wind Resource Characterization” (Schreck et al. 2008; Shaw et al. 2009) and another in 2012 titled “Complex Flow” (DOE 2012) documented the need for atmospheric science advances across a range of scales: turbine scale, wind plant scale, mesoscale, and global scale. Both workshops determined the need for field campaigns to collect observations for model validation and development, advanced supercomputing, data sharing and archiving, and a high level of coordination.
An earlier study in 2011/12, known as the Wind Forecast Improvement Project (WFIP1; Wilczak et al. 2015) focused on the initialization problem by examining the impact that assimilating enhanced observations has on forecast accuracy. Results demonstrated that assimilation of the combination of the special WFIP1 remote sensing and industry-provided tall tower and turbine nacelle anemometer observations provided a 3% reduction in root-mean-square error (rmse) for wind power forecasts averaged over the first six forecast hours (Wilczak et al. 2015). A larger reduction of 6% rmse over this same forecast horizon was found for the regionally aggregated wind power production, which may be of more relevance for balancing the electric grid. A follow-on study (Wilczak et al. 2019a) demonstrated that assimilation of the more numerous tall tower/nacelle observations alone provided a relatively large improvement through the first 3–4 h of the forecasts, which diminished to a negligible impact by forecast hour 6. In comparison, assimilation of the sparser vertical profiling remote sensors alone provided an initially smaller impact that decayed at a much slower rate, with a positive impact present through the first 12 h of the forecast. Assimilation of the WFIP1 special observations also was shown to significantly improve forecasts of wind ramp events (Bianco et al. 2016; Akish et al. 2019), which are of great importance for balancing the grid.
In 2015, DOE initiated a 4-yr study, the Second Wind Forecast Improvement Project (WFIP2), to improve the representation of boundary layer physics and related processes in mesoscale models for better wind and wind power forecasts in complex terrain. WFIP2 was an interagency, public–private partnership under the Atmosphere to Electrons (A2e) initiative (see the “A2e initiative” sidebar) comprising DOE and National Oceanographic and Atmospheric Administration (NOAA) laboratories as well as the wind industry and academia through a team led by Vaisala, Inc. The Vaisala team proposed the Columbia basin as the focus area for the study in their winning response to a DOE funding opportunity announcement. The rationale for this kind of partnership was not only to carry out basic atmospheric research but also to provide a path for incorporation of improvements into both NOAA’s foundational operational forecasts and the forecast services provided by industry. Primary participants are listed in Table 1 together with external collaborators who provided significant data or other assistance to the project.
WFIP2 is a study within the Atmosphere to Electrons (A2e) initiative begun by DOE’s Wind Energy Technologies Office in 2015. The overall objective of A2e is to optimize the power production of wind plants as a whole rather than by individual turbine. Such optimization requires improved and detailed knowledge of boundary layer winds and turbulence and of wind turbine and plantwide aerodynamics as well as the development of control systems that account for these processes across the wind plant. The three disciplines—the atmospheric boundary layer, aerodynamics, and system controls—represent three intellectual communities that typically engage each other tangentially. Closer communication and coordination among these communities through A2e facilitates problem solving where their disciplines intersect. For example, wind plants are commonly sited in complex terrain, where thermodynamic stability varies strongly over the diurnal cycle. In addition, the wind field can vary strongly over the O(10)-km horizontal dimension of a wind plant. However, partly for computational expediency and partly from incomplete understanding of the behavior of the atmosphere, aerodynamicists have often used simplified inflow conditions such as neutral stability and a simple logarithmic wind profile to drive simulations of the production and impact of wakes generated by upstream turbines on those operating downstream. Conversely, atmospheric scientists have in many cases addressed problems assumed to be important for wind energy without engaging aerodynamicists directly to understand what is useful and usable. Thus, two motivations drove the development of the A2e initiative: to address the complex, interdisciplinary problem of wind plant optimization and to provide a structure in which information would be shared efficiently among disciplines.
The A2e initiative reflects an explicit partnership between DOE and its national laboratories as well as strong collaboration with other federal agencies and the academic community. To oversee the program, DOE developed an Executive Management Committee comprising federal program managers and subject matter experts from the national laboratories leading atmospheric sciences, aerodynamics, and controls work. The intention of this structure was to assure interdisciplinary integration within overall DOE priorities. Specific focus areas within A2e include the following:
High-fidelity modeling, verification, and validation: encompassing mesoscale and large-eddy simulation (LES) modeling of the atmosphere, turbine-resolving modeling of wind plants, and field studies to improve and validate the models. High-performance computing enables detailed simulation of complex flows.
Integrated wind plant control: developing new technology in which controllers for individual turbines act with awareness of all other turbines enabling, for example, steering of wakes away from downstream turbines to maximize power production and minimize turbulent loads.
Integrated system design and analysis (ISDA): Developing tools to incorporate new knowledge gained through A2e to optimize and assess the design and performance of wind plants.
Reliability: assessing impacts on turbine and plant lifetimes resulting from new modes of plant operations.
Performance, risk, uncertainty, and finance (PRUF): assessing the financial impact of reducing uncertainties in wind plant power production from improvements in each of the above focus areas, providing a way to prioritize research resources.
Data archive and portal (DAP): providing an enduring archive for public use of field data collected and benchmark model output generated under the A2e initiative.
WFIP2 comprised three distinct but integrated components: a multiscale field study spanning 18 months, a model development effort, and the development of support tools to assist the industry in wind power forecasting. Each of these components will be fully described in its own overview paper in this journal. The overview of observations (Wilczak et al. 2019b) appears in the current issue. Overviews of model (Olson et al. 2019) and decision support tool (Grimit et al. 2019, in preparation for Bull. Amer. Meteor. Soc.) developments will appear in subsequent issues. A related effort to refine methods for coupling mesoscale and microscale models for wind energy applications is using observations collected during WFIP2. An overview by Haupt et al. (2019) will also soon appear in this journal. The purpose of this article is to provide a general overview of the scope and motivation of WFIP2 and to highlight some of its key outcomes.
ATMOSPHERIC CHALLENGES IN COMPLEX TERRAIN.
The challenge of complex-terrain meteorology has attracted attention for decades. Among the earliest concerted efforts to gain insight into these flows was DOE’s Atmospheric Studies in Complex Terrain (ASCOT) program, which included a series of field studies that extended from the late 1970s to the early 1990s (Orgill and Schreck 1985; Clements et al. 1989; Coulter and Martin 1996). As measurements and computational capabilities advanced, so did the comprehensiveness and sophistication of the approach to complex-terrain studies. The Mesoscale Alpine Programme (MAP; Bougeault et al. 2001) in 1999 was a large international effort to better understand and simulate the impact of orography on precipitation and hydrology, and its focus included boundary layer behavior in steep terrain. The Vertical Transport and Mixing (VTMX) study in 2000 combined modeling and meteorological observations with tracer measurements to reveal the behavior of circulations in the Salt Lake Valley and the ability of mesoscale models to replicate them (Doran et al. 2002). Another significant effort, which focused particularly on improving weather prediction in complex terrain, was the 5-yr Mountain Terrain Atmospheric Modeling and Observations (MATERHORN) program that began in 2011 (Fernando et al. 2015; Di Sabatino 2016). Most recently, and with a focus specifically on wind energy, the New European Wind Atlas (NEWA) project (Mann et al. 2018) has carried out a series of field studies of increasing complexity to provide validation data for models that will be used to provide a more accurate wind atlas for Europe and Turkey. The studies culminated in a comprehensive measurement effort involving multiple remote sensing systems, numerous surface flux towers, and a multitude of other measurements to capture the winds and turbulence across two parallel ridges and the valley between near Perdigão, Portugal, during May–June 2017 (Fernando et al. 2017; Wildmann et al. 2018).
Physical phenomena associated with complex terrain include slope flows, mountain–valley/plain circulations, gap flows, topographic wakes, cold pools, and gravity waves. These phenomena are driven by a combination of dynamic or thermodynamic forcing and modulated locally by the terrain and by variations in land cover, surface moisture, slope shading by terrain, and clouds. The result is complicated atmospheric flow that is nonstationary and inhomogeneous over a broad range of scales. Serafin et al. (2018) have recently provided a comprehensive review of key challenges to understanding and simulating boundary layer exchange processes in complex terrain. These challenges include strong horizontal forcing that makes horizontal gradients of turbulent fluxes potentially as important as vertical exchange, which is generally not accounted for in parameterizations, (e.g., Rai et al. 2017). Further, conventional assumptions underlying many subgrid-scale parameterizations, such as horizontal homogeneity, stationarity, and constant flux layers at the surface need to be reexamined. Lehner and Rotach (2018) noted a number of challenges to numerical weather prediction modeling in complex terrain, including the representation of soil and land cover; the appropriate parameterization of shortwave and longwave radiation; the need for finer grid resolution in increasingly steep terrain; the associated “terra incognita” (Wyngaard 2004), where model resolution approaches dominant turbulence length scales; and numerical issues that arise with terrain-following coordinates when terrain becomes steep (e.g., Mirocha and Lundquist 2017; Arthur et al. 2018).
An additional challenge in complex terrain populated by wind turbines is accounting for the impact the turbines have in addition to the natural landscape on atmospheric flow. The WFIP2 domain includes over 6 GW of installed wind capacity, and wind forecasting models must consider possible effects of those turbines on local microclimates as well as the general wind behavior. Wind farms can warm the local environment at night by approximately 0.5°C by mixing warmer air aloft down to the surface (Baidya Roy and Traiteur 2010; Zhou et al. 2012; Rajewski et al. 2013, 2014; Smith et al. 2013; Armstrong et al. 2016). Large wind farms also create wakes, or regions of reduced wind speed, downwind, that can undermine power production at downwind wind farms (Nygaard 2014; Lundquist et al. 2018). Wind farms’ effects can be incorporated in mesoscale models (Fitch et al. 2012, 2013; Volker et al. 2015); these effects have been validated offshore (Jiménez et al. 2015; Siedersleben et al. 2018) and in flat terrain (Lee and Lundquist 2017) but not yet in complex terrain.
Serafin et al. (2018) noted that progress in understanding complex-terrain meteorology requires dense measurement networks, including remote sensing, that can map the state of the atmosphere. Further, high-resolution numerical weather prediction models with appropriate numerical methods and parameterizations are required to represent the essential flow characteristics resulting from the atmosphere’s interaction with the terrain. Combining observations with detailed modeling was the central strategy for WFIP2 with the following key elements:
Observing boundary layer structure on multiple scales over a full annual cycle
Using the data collected to evaluate baseline NWP model performance as well as improvements in parameterizations and numerical techniques over the spectrum of atmospheric conditions in an annual cycle
Using observations to establish uncertainties in models and developing decision support tools for use by the wind industry that can create power forecasts that effectively incorporate this uncertainty
Archiving all observations and benchmark model output in a publicly accessible data archive (see “Data Archive and Portal: Making data accessible to the public” sidebar) to engage the broader community in advancing complex-terrain meteorology
The DAP, a key component of the A2e initiative, was developed to make relevant historical data as well as new data, both field measurements and model benchmark runs, readily available and easily accessible and to facilitate their use by the research community. The scope of the DAP is to provide a secure, enduring archive to enable access to all significant wind energy–related data collected by projects such as WFIP2 supported under A2e. The archive supports unrestricted access to open data as well as restricted access to proprietary data through multifactor authentication. Users can access open data by registering for an account online (https://a2e.energy.gov/about/dap).
The DAP is an integral part of WFIP2. As part of ingesting and disseminating data provided via streaming or manual uploads by WFIP2 instrument providers and modelers, the DAP team provided file naming standards, coordinated user access, and assisted users in preparing data for upload. The naming convention includes indicators within the individual file names that denote the state of data within the file: “raw,” “quality controlled,” and “processed.” A key part of the archival process is capturing metadata for all instruments and archived model output, which was required of data providers and accomplished through the web portal. The DAP uses a data ingest framework that is capable of running in a cloud-computing environment and can implement stateless ingest processes. The stateless ingest process allows concurrent processing of many files by distributing the workload across compute nodes in the cloud environment with no dependencies on input files.
In addition to archiving data, the DAP also provides visualization capability. It would not have been efficient to manually review data from the many thousands of files produced during the WFIP2 field study. The visualization tool enables quick selection of relevant fields and time periods from instruments of interest and includes an animation capability. These visualizations were critical in particular to the development of the WFIP2 event log, which was the basis for the selection of case studies. An example visualization is shown in Fig. SB1. In addition to visualizations from WFIP2 instruments, the DAP also acquired satellite and analysis images via the University of Washington during the period of the field study. In all, more than 2 million data files and photographic images are stored within the DAP as part of WFIP2. As of mid-December 2018, WFIP2 had 277 datasets with 18 million files totaling 210 TB stored on the A2e DAP (to browse WFIP2 data directly, please to go to https://a2e.energy.gov/projects/wfip2).
The two main objectives of WFIP2 were to increase understanding of the physical processes and atmospheric properties that affect wind-turbine-height wind speed and direction in areas of complex terrain and to incorporate resulting improved physics into operational weather models. The 0–15-h time frame was the time horizon of focus, with improvements expected in the day-ahead forecast, too. The NWS operationally runs the 13-km horizontal grid spacing, hourly updated Rapid Refresh (RAP) and the 3-km horizontal grid spacing, hourly updated High-Resolution Rapid Refresh (HRRR) weather models, whose outputs are frequently used by industry for predicting wind and solar resources and the power they produce. These models, which are based on variants of the Weather Research and Forecasting (WRF) Model, were targeted for improvement with the intention that validated improvements would be incorporated in the next operational version of the models. A special HRRR nest with 750-m horizontal grid spacing was developed and run over the Columbia basin study area.
The WFIP2 study region’s dominant topographical features include the Pacific coast, the Cascade Mountain Range (including several volcanic peaks), the Columbia River basin, and the Columbia River Gorge that cuts through the Cascades linking the coastal plain with the inland basin. (Fig. 1). Figure 2 is a photo taken near the center of Fig. 1. The WFIP2 observational campaign sought to sample winds, stratification, and turbulence across a broad range of spatiotemporal scales to provide insight into key physical processes and observations for model validation, including the operational HRRR model. Therefore, telescoping nests of observations (shown schematically in Fig. 3) were designed: the outer nest encompassing an area from the coast to the eastern edge of the basin, a middle nest focused on the Columbia Gorge and basin, and an inner nest targeting an 80 km × 80 km region near the center of the wind energy production area. Finally, a network of surface flux stations, including an 80-m tower, was deployed in a 2 km × 2 km area, similar to a high-resolution model grid cell, to observe subgrid-scale turbulent processes.
At several supersites, suites of instruments were deployed measuring profiles of winds, temperature, humidity, and radar reflectivity at different vertical resolutions and different height intervals through and above the atmospheric boundary layer. These complementary measurements allowed for a detailed analysis of complex meteorological phenomena and an evaluation of the ability of models (and their parameterization schemes) to accurately reproduce those events. Also, on all of the nests, multiple sites observed turbulence quantities, transcending standard measurements of winds and stratification. Wind forecasts are very sensitive to parameters in boundary layer turbulence parameterizations that can vary seasonally, especially the turbulence dissipation rate (Yang et al. 2017; Berg et al. 2019; McCaffrey et al. 2017; Muñoz-Esparza et al. 2018; Bodini et al. 2018). Several sites thus included capabilities to estimate turbulence dissipation rate throughout the boundary layer.
WFIP2 capitalized on the recent experience of the DOE-funded Experimental Planetary Boundary Layer Instrumentation Assessment (XPIA) campaign Lundquist et al. 2017), which deployed state-of-the-art remote sensing technology, such as scanning lidars and Ka-band radars for quantifying winds using multi-Doppler scanning techniques and microwave radiometers for estimating atmospheric stability. Standard measurements from sonic anemometers on a 300-m meteorological tower quantified the uncertainty of these new types of measurements (Choukulkar et al. 2017; Debnath et al. 2017; Newsom et al. 2017; McCaffrey et al. 2017, Bianco et al. 2017) in preparation for their use in WFIP2. An example of the combination of remote sensing systems to quantify a WFIP2 meteorological event significant for wind energy, in this case cold pool mix out, is shown in Fig. 4. The figure shows the erosion of the cold pool as observed by a collocated microwave radiometer and radar wind profiler.
In addition to the observations provided by members of the WFIP2 team, several external organizations contributed data to this effort (Table 1). For weather events anticipated to be of particular interest, such as cold pool scouring, the NWS added two radiosonde launches per day at their operational sites at Quillayute and Spokane, Washington; Salem and Medford, Oregon; and Boise, Idaho. In aggregate, the NWS committed to providing 200 extra launches to WFIP2. Additionally, power production data were provided by a number of wind plant operators in the Columbia basin under nondisclosure agreements to WFIP2. These data are generally proprietary but are essential to evaluating the impact of improved wind forecasts on electrical power forecasting.
A unique aspect of WFIP2 was its 18-month-long, comprehensive set of meteorological observations important for wind energy (Wilczak et al. 2019b). This set of observations, which is freely available to the research community through the Data Archive and Portal (DAP), forms the basis for model development work through a better understanding of the meteorological events and by validation of model simulations. A hierarchy of model development experiments that span an annual cycle was devised to test specific model development efforts as well as the collective impacts of all model physics changes (Olson et al. 2019). This set of experiments includes 1) single case studies, 2) cold-start reforecasts, and 3) fully cycled (data assimilation) tests identical to the operational RAP/HRRR forecast systems. The resulting model improvements were formally validated, and some have been incorporated into NWS foundational weather forecast models. Finally, a tool to provide improved local forecasts of wind ramp events to the wind industry, built on physical forecasts and associated uncertainties, was developed and shared with potential wind industry users (Grimit et al. 2019, in preparation for Bull. Amer. Meteor. Soc.).
A common set of case studies, selected during the field project, represents the full range of forecasting challenges experienced during the 18-month field study. Model changes were tested in a subset of these case studies and validated against observations. Other analog cases were selected to independently test the model improvements, verifying the generality of the model-physics changes. This work largely drove the model development. Several model components were deemed mature by NOAA’s deadline and appropriate to be included in the next operational version of the national weather forecast models. This collection of modifications was advanced to the longer-term testing phase (below).
This second stage of testing consisted of a full year of twice-daily 24-h reforecasts. Two sets of simulations were performed: 1) a control set of model physics, consisting of the versions of the parameterizations in operational use at the beginning of WFIP2 and 2) an experimental set of physics, consisting of the new or modified set of physical parameterizations. This set of simulations provided a robust benchmark and a measure of success of our preliminary model development tasks.
Fully cycled retrospective test period.
A complementary testing framework, more aligned with the full functionality of the RAP and HRRR forecast systems, consisted of hourly updated experiments that included data assimilation of WFIP2 observations. Because of the computational expense of these experiments, only two 10-day retrospective periods were selected, which included the major forecast challenges found in the cool and warm seasons. These tests included hourly cycled RAP and HRRR forecasts run out to 24 h with a very high-resolution nest (horizontal grid spacing of 750 m) run concurrently within the HRRR over the WFIP2 study region. These tests were essential for determining whether the model improvements could be implemented into future operational versions of RAP and HRRR.
Verification and validation.
Formal, coordinated verification and validation (V&V) was central to the development and analysis of model improvements and scientific findings within WFIP2. Verification [American Society of Mechanical Engineers (ASME); ASME 2009] is defined as checking the mechanics of the software code, and validation concerns determining the degree to which the model represents the real world for a particular application (i.e., comparison with observations; ASME 2009; Oberkampf and Roy 2010). WFIP2 included the application of tools and methods to enable repeatable, metrics-based assessments of the HRRR model improvements for the analysis of mesoscale weather phenomena that are important for wind energy in the Columbia basin and elsewhere. Verification in WFIP2 was performed with a single-column model to test the impact of isolated code modifications and verify the coding functioned as expected. This process yielded a systematic and quantitative overall assessment of model improvements and information about forecast uncertainties that could be applied in decision support tools for the wind industry.
Improvements transferred to RAP and HRRR.
WFIP2 model development efforts were intended to help improve foundational operational forecasts, specifically the RAP and HRRR. WFIP2-related model code changes to the boundary layer, horizontal diffusion, and gravity wave drag schemes were passed into upgraded versions of RAP and HRRR (summer 2018). For example, a revision to the mixing length used to calculate eddy diffusivity based upon a local, or z-less, formulation significantly improved the timing of mix out of cold pools (Olson et al. 2019). In addition, the formulation caused no increase in errors in other regions of the United States or under other weather conditions. Further development efforts will make it into future operational models pending further testing.
WFIP2 model development efforts were also intended to improve community-accessible models such as the WRF Model. Modifications to the Mellor–Yamada–Nakanishi–Niino (MYNN) planetary boundary layer (PBL) scheme and the horizontal diffusion were integrated in version 4.0. Other ongoing WFIP2 development efforts will be integrated into the National Center for Atmospheric Research’s (NCAR’s) Advanced Research version of WRF (WRF-ARW) repository pending successful testing.
Decision support tools.
An important component of WFIP2 was devoted to the investigation of potential impacts on private sector decision-making as a result of the modeling improvements. This portion of the work was driven by two primary questions: 1) How can we convey the possible impacts of complex-terrain phenomena on wind power forecasts, and 2) can we create actionable alerts that will improve situational awareness and reduce decision-making time? Forecast algorithms were developed to target complex-terrain weather phenomena observed during the field campaign that were associated with potentially disruptive power ramping events, like the mix out of cold pools as illustrated in Fig. 4. The algorithm design allowed for fully probabilistic forecasts of the ramp-causing events. The concept was illustrated through a prototype implementation in Vaisala’s forecast visualization tools and shared with industry partners from Table 1. Feedback on the concept was encouraging and provided useful avenues for further development of tools to aid the wind industry (Grimit et al. 2019, in preparation for Bull. Amer. Meteor. Soc.). The idea is general enough that it could be applied more broadly to other physical phenomena and wind projects elsewhere in the United States.
WFIP2 was a comprehensive field and modeling study aimed at improving wind forecasts at wind turbine heights in complex terrain. A unique and valuable feature of WFIP2 was the 18-month duration of the comprehensively nested observational component. To our knowledge, no other complex-terrain datasets document this spatial and temporal range to provide opportunities to validate model improvements with comprehensive observations. An additional strength of this study was the collaboration among DOE and NOAA laboratories and industry. Not only were the research teams able to make significant advances in fundamental atmospheric science and addressing shortcomings of subgrid-scale parameterizations and numerical methods, but the engagement of NOAA and industry also provided paths to immediate dissemination of the results to operational users. As a consequence, improved treatments of vertical mixing and surface friction in complex terrain are now included in the NWS operational forecasts. Further, decision support tools have been developed and transferred to the wind energy industry. These tools include both improved modeling and quantification of associated forecast uncertainties in an interface that allows easy visualization of both forecast power ramps and the confidence associated with them.
We thank Clark King, Jesse Leach, Tom Ayers, Daniel Wolfe, Timothy Coleman, Daniel Gottas, Scott Abbott, Laura Bianco, and Randy Nishiyama from NOAA/ESRL/PSD for site selection, leases, instrument deployment and maintenance, data collection, and data QC; Clara St. Martin, Joseph Lee, Jessica Tomaszewski, and Joshua Aikins for CU-Boulder instrumentation deployment and data collection; Alan Brewer, Scott P. Sandberg, and Ann Weickmann from NOAA/ESRL/CSD for deployment and data collection; Kevin Widener, G. Hodges, E. Hall, and J. Wendell for instrumentation deployment, maintenance, and data collection; Victor Morris, Mikhail Pekour, and Dan Nelson from Pacific Northwest National Laboratory (PNNL) for installation, maintenance, and data collection; Jennifer Newman, formerly from NREL, for instrument deployment and the DAP team at PNNL (Matt Macduff, Ken Burk, Tonya Martin, Sherman Beus, and Brian Ermold) for their support in data collection, standardization, visualization, and dissemination; and Billy Roberts from NREL for the creation of Figs. 1 and 3. We also thank the Bonneville Power Administration, Avangrid, Eurus Energy, NextEra Energy, Portland General Electric, Siemens Heavy Industries, Southern California Edison, and White Creek Wind for sharing meteorological and power data. We are also grateful in particular to the National Weather Service (NWS) for providing the valuable supplemental radiosonde launches and to Andy Edman of the NWS Western Regional Headquarters for coordinating that support. This work was authored (in part) by NREL, operated by the Alliance for Sustainable Energy, LLC, for the DOE, under Contract DE-AC36-08GO28308, with funding provided by the DOE Office of Energy Efficiency and Renewable Energy Wind Energy Technologies. PNNL is operated by Battelle Memorial Institute for the DOE under Contract DE-AC05-76RL01830. Lawrence Livermore National Laboratory is operated by Lawrence Livermore National Security, LLC, for the U.S. Department of Energy, National Nuclear Security Administration under Contract DE-AC52-07NA27344. The views expressed in the article do not necessarily represent the views of the DOE or the U.S. government. The U.S. government retains, and the publisher, by accepting the article for publication, acknowledges that the U.S. government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U.S. government purposes.