Browse

You are looking at 41 - 48 of 48 items for :

  • CCSM4/CESM1 x
  • Refine by Access: All Content x
Clear All
Gokhan Danabasoglu
,
Susan C. Bates
,
Bruce P. Briegleb
,
Steven R. Jayne
,
Markus Jochum
,
William G. Large
,
Synte Peacock
, and
Steve G. Yeager

Abstract

The ocean component of the Community Climate System Model version 4 (CCSM4) is described, and its solutions from the twentieth-century (20C) simulations are documented in comparison with observations and those of CCSM3. The improvements to the ocean model physical processes include new parameterizations to represent previously missing physics and modifications of existing parameterizations to incorporate recent new developments. In comparison with CCSM3, the new solutions show some significant improvements that can be attributed to these model changes. These include a better equatorial current structure, a sharper thermocline, and elimination of the cold bias of the equatorial cold tongue all in the Pacific Ocean; reduced sea surface temperature (SST) and salinity biases along the North Atlantic Current path; and much smaller potential temperature and salinity biases in the near-surface Pacific Ocean. Other improvements include a global-mean SST that is more consistent with the present-day observations due to a different spinup procedure from that used in CCSM3. Despite these improvements, many of the biases present in CCSM3 still exist in CCSM4. A major concern continues to be the substantial heat content loss in the ocean during the preindustrial control simulation from which the 20C cases start. This heat loss largely reflects the top of the atmospheric model heat loss rate in the coupled system, and it essentially determines the abyssal ocean potential temperature biases in the 20C simulations. There is also a deep salty bias in all basins. As a result of this latter bias in the deep North Atlantic, the parameterized overflow waters cannot penetrate much deeper than in CCSM3.

Full access
Keith Oleson

Abstract

A new parameterization of urban areas in the Community Climate System Model version 4 (CCSM4) allows for simulation of temperature in cities where most of the global population lives. CCSM4 Coupled Model Intercomparison Project phase 5 (CMIP5) simulations [Representative Concentration Pathway (RCP) 2.6, 4.5, and 8.5] are analyzed to examine how urban and rural areas might respond differently to changes in climate. The urban heat island (UHI), defined as the urban minus rural air temperature, is used as a metric. The average UHI at the end of the twenty-first century is similar to present day in RCP2.6 and RCP4.5, but decreases in RCP8.5. Both the daytime and nocturnal UHIs decrease in RCP8.5, but the decrease in the daytime UHI is larger and more uniform across regions and seasons than in the nocturnal UHI. This is caused by changes in evaporation that warm the rural surface more than the urban. There is significant spatial and seasonal variability in the response of the nocturnal UHI caused mainly by changes in the rural surface. In Europe, the response to climate change of rural leaf–stem area in summer and clouds and rural soil moisture in winter explains the majority of this variability. Climate change increases the number of warm nights in urban areas substantially more than in rural areas. These results provide evidence that urban and rural areas respond differently to climate change. Thus, the unique aspects of the urban environment should be considered when making climate change projections, particularly since the global population is becoming increasingly urbanized.

Full access
A. Gettelman
,
J. E. Kay
, and
K. M. Shell

Abstract

The major evolution of the National Center for Atmospheric Research Community Atmosphere Model (CAM) is used to diagnose climate feedbacks, understand how climate feedbacks change with different physical parameterizations, and identify the processes and regions that determine climate sensitivity. In the evolution of CAM from version 4 to version 5, the water vapor, temperature, surface albedo, and lapse rate feedbacks are remarkably stable across changes to the physical parameterization suite. However, the climate sensitivity increases from 3.2 K in CAM4 to 4.0 K in CAM5. The difference is mostly due to (i) more positive cloud feedbacks and (ii) higher CO2 radiative forcing in CAM5. The intermodel differences in cloud feedbacks are largest in the tropical trade cumulus regime and in the midlatitude storm tracks. The subtropical stratocumulus regions do not contribute strongly to climate feedbacks owing to their small area coverage. A “modified Cess” configuration for atmosphere-only model experiments is shown to reproduce slab ocean model results. Several parameterizations contribute to changes in tropical cloud feedbacks between CAM4 and CAM5, but the new shallow convection scheme causes the largest midlatitude feedback differences and the largest change in climate sensitivity. Simulations with greater cloud forcing in the mean state have lower climate sensitivity. This work provides a methodology for further analysis of climate sensitivity across models and a framework for targeted comparisons with observations that can help constrain climate sensitivity to radiative forcing.

Full access
Marika M. Holland
,
David A. Bailey
,
Bruce P. Briegleb
,
Bonnie Light
, and
Elizabeth Hunke

Abstract

The Community Climate System Model, version 4 has revisions across all components. For sea ice, the most notable improvements are the incorporation of a new shortwave radiative transfer scheme and the capabilities that this enables. This scheme uses inherent optical properties to define scattering and absorption characteristics of snow, ice, and included shortwave absorbers and explicitly allows for melt ponds and aerosols. The deposition and cycling of aerosols in sea ice is now included, and a new parameterization derives ponded water from the surface meltwater flux. Taken together, this provides a more sophisticated, accurate, and complete treatment of sea ice radiative transfer. In preindustrial CO2 simulations, the radiative impact of ponds and aerosols on Arctic sea ice is 1.1 W m−2 annually, with aerosols accounting for up to 8 W m−2 of enhanced June shortwave absorption in the Barents and Kara Seas and with ponds accounting for over 10 W m−2 in shelf regions in July. In double CO2 (2XCO2) simulations with the same aerosol deposition, ponds have a larger effect, whereas aerosol effects are reduced, thereby modifying the surface albedo feedback. Although the direct forcing is modest, because aerosols and ponds influence the albedo, the response is amplified. In simulations with no ponds or aerosols in sea ice, the Arctic ice is over 1 m thicker and retains more summer ice cover. Diagnosis of a twentieth-century simulation indicates an increased radiative forcing from aerosols and melt ponds, which could play a role in twentieth-century Arctic sea ice reductions. In contrast, ponds and aerosol deposition have little effect on Antarctic sea ice for all climates considered.

Full access
Alexandra Jahn
,
Kara Sterling
,
Marika M. Holland
,
Jennifer E. Kay
,
James A. Maslanik
,
Cecilia M. Bitz
,
David A. Bailey
,
Julienne Stroeve
,
Elizabeth C. Hunke
,
William H. Lipscomb
, and
Daniel A. Pollak

Abstract

To establish how well the new Community Climate System Model, version 4 (CCSM4) simulates the properties of the Arctic sea ice and ocean, results from six CCSM4 twentieth-century ensemble simulations are compared here with the available data. It is found that the CCSM4 simulations capture most of the important climatological features of the Arctic sea ice and ocean state well, among them the sea ice thickness distribution, fraction of multiyear sea ice, and sea ice edge. The strongest bias exists in the simulated spring-to-fall sea ice motion field, the location of the Beaufort Gyre, and the temperature of the deep Arctic Ocean (below 250 m), which are caused by deficiencies in the simulation of the Arctic sea level pressure field and the lack of deep-water formation on the Arctic shelves. The observed decrease in the sea ice extent and the multiyear ice cover is well captured by the CCSM4. It is important to note, however, that the temporal evolution of the simulated Arctic sea ice cover over the satellite era is strongly influenced by internal variability. For example, while one ensemble member shows an even larger decrease in the sea ice extent over 1981–2005 than that observed, two ensemble members show no statistically significant trend over the same period. It is therefore important to compare the observed sea ice extent trend not just with the ensemble mean or a multimodel ensemble mean, but also with individual ensemble members, because of the strong imprint of internal variability on these relatively short trends.

Full access
Aneesh C. Subramanian
,
Markus Jochum
,
Arthur J. Miller
,
Raghu Murtugudde
,
Richard B. Neale
, and
Duane E. Waliser

Abstract

This study assesses the ability of the Community Climate System Model, version 4 (CCSM4) to represent the Madden–Julian oscillation (MJO), the dominant mode of intraseasonal variability in the tropical atmosphere. The U.S. Climate Variability and Predictability (CLIVAR) MJO Working Group’s prescribed diagnostic tests are used to evaluate the model’s mean state, variance, and wavenumber–frequency characteristics in a 20-yr simulation of the intraseasonal variability in zonal winds at 850 hPa (U850) and 200 hPa (U200), and outgoing longwave radiation (OLR). Unlike its predecessor, CCSM4 reproduces a number of aspects of MJO behavior more realistically.

The CCSM4 produces coherent, broadbanded, and energetic patterns in eastward-propagating intraseasonal zonal winds and OLR in the tropical Indian and Pacific Oceans that are generally consistent with MJO characteristics. Strong peaks occur in power spectra and coherence spectra with periods between 20 and 100 days and zonal wavenumbers between 1 and 3. Model MJOs, however, tend to be more broadbanded in frequency than in observations. Broad-scale patterns, as revealed in combined EOFs of U850, U200, and OLR, are remarkably consistent with observations and indicate that large-scale convergence–convection coupling occurs in the simulated MJO.

Relations between MJO in the model and its concurrence with other climate states are also explored. MJO activity (defined as the percentage of time the MJO index exceeds 1.5) is enhanced during El Niño events compared to La Niña events, both in the model and observations. MJO activity is increased during periods of anomalously strong negative meridional wind shear in the Asian monsoon region and also during strong negative Indian Ocean zonal mode states, in both the model and observations.

Full access
Peter R. Gent
,
Gokhan Danabasoglu
,
Leo J. Donner
,
Marika M. Holland
,
Elizabeth C. Hunke
,
Steve R. Jayne
,
David M. Lawrence
,
Richard B. Neale
,
Philip J. Rasch
,
Mariana Vertenstein
,
Patrick H. Worley
,
Zong-Liang Yang
, and
Minghua Zhang

Abstract

The fourth version of the Community Climate System Model (CCSM4) was recently completed and released to the climate community. This paper describes developments to all CCSM components, and documents fully coupled preindustrial control runs compared to the previous version, CCSM3. Using the standard atmosphere and land resolution of 1° results in the sea surface temperature biases in the major upwelling regions being comparable to the 1.4°-resolution CCSM3. Two changes to the deep convection scheme in the atmosphere component result in CCSM4 producing El Niño–Southern Oscillation variability with a much more realistic frequency distribution than in CCSM3, although the amplitude is too large compared to observations. These changes also improve the Madden–Julian oscillation and the frequency distribution of tropical precipitation. A new overflow parameterization in the ocean component leads to an improved simulation of the Gulf Stream path and the North Atlantic Ocean meridional overturning circulation. Changes to the CCSM4 land component lead to a much improved annual cycle of water storage, especially in the tropics. The CCSM4 sea ice component uses much more realistic albedos than CCSM3, and for several reasons the Arctic sea ice concentration is improved in CCSM4. An ensemble of twentieth-century simulations produces a good match to the observed September Arctic sea ice extent from 1979 to 2005. The CCSM4 ensemble mean increase in globally averaged surface temperature between 1850 and 2005 is larger than the observed increase by about 0.4°C. This is consistent with the fact that CCSM4 does not include a representation of the indirect effects of aerosols, although other factors may come into play. The CCSM4 still has significant biases, such as the mean precipitation distribution in the tropical Pacific Ocean, too much low cloud in the Arctic, and the latitudinal distributions of shortwave and longwave cloud forcings.

Full access
Peter R. Gent
and
Gokhan Danabasoglu

Abstract

Results from two perturbation experiments using the Community Climate System Model version 4 where the Southern Hemisphere zonal wind stress is increased are described. It is shown that the ocean response is in accord with experiments using much-higher-resolution ocean models that do not use an eddy parameterization. The key to obtaining an appropriate response in the coarse-resolution climate model is to specify a variable coefficient in the Gent and McWilliams eddy parameterization, rather than a constant value. This result contrasts with several recent papers that have suggested that coarse-resolution climate models cannot obtain an appropriate response.

Full access