Browse
Abstract
Improving Land Surface Temperature (LST) modeling is vital for mitigating climate change effects on various ecosystems and marine habitats such as on important sea turtle habitats. Over the past decade, extreme temperatures have likely significantly affected nesting sea turtle habitats in the Arabian Gulf, with predominantly female hatchlings creating an imbalance in the sex ratio. Such shifts have profound implications for these habitats' long-term survival and conservation management. This study leverages statistical machine learning models to measure ongoing temporal variations in LST. We break down the LST time series into trend, seasonal, and noise components using classical decomposition methods like X11, SEATS, and the Seasonal and Trend decomposition using Loess (STL) approach. The long-term trends in LST data are driven by climate change rather than seasonal fluctuations. We employed Neural Network Auto Regression (NNAR), BaggedETS, Exponential Smoothing models, and STL method to project future LST values. We also explored advanced forecasting models like Dynamic Harmonic Regression, TBATS, and SARIMA for comparative performance analysis. Extended warm periods were identified for Abu Ali Island between 2017 and 2018 through several decomposition methods, likely linked to the 2015-2016 El Niño event. We also conducted a Marine Heat Wave (MHW) analysis from 2010-2020, establishing a pronounced impact of the 2015-2016 El Niño on the Arabian Gulf. In nesting beach environments with high LST, marine heatwaves could have a significant impact on sea turtle populations without human intervention such as artificially cooling the nest temperature. SARIMA model showed higher forecasting precision for in-situ weather data while NNAR model demonstrated superior performance with remotely sensed data.
Abstract
Improving Land Surface Temperature (LST) modeling is vital for mitigating climate change effects on various ecosystems and marine habitats such as on important sea turtle habitats. Over the past decade, extreme temperatures have likely significantly affected nesting sea turtle habitats in the Arabian Gulf, with predominantly female hatchlings creating an imbalance in the sex ratio. Such shifts have profound implications for these habitats' long-term survival and conservation management. This study leverages statistical machine learning models to measure ongoing temporal variations in LST. We break down the LST time series into trend, seasonal, and noise components using classical decomposition methods like X11, SEATS, and the Seasonal and Trend decomposition using Loess (STL) approach. The long-term trends in LST data are driven by climate change rather than seasonal fluctuations. We employed Neural Network Auto Regression (NNAR), BaggedETS, Exponential Smoothing models, and STL method to project future LST values. We also explored advanced forecasting models like Dynamic Harmonic Regression, TBATS, and SARIMA for comparative performance analysis. Extended warm periods were identified for Abu Ali Island between 2017 and 2018 through several decomposition methods, likely linked to the 2015-2016 El Niño event. We also conducted a Marine Heat Wave (MHW) analysis from 2010-2020, establishing a pronounced impact of the 2015-2016 El Niño on the Arabian Gulf. In nesting beach environments with high LST, marine heatwaves could have a significant impact on sea turtle populations without human intervention such as artificially cooling the nest temperature. SARIMA model showed higher forecasting precision for in-situ weather data while NNAR model demonstrated superior performance with remotely sensed data.
Abstract
This study evaluates the performance of the Conformal Cubic Atmospheric Model (CCAM) in dynamically downscaling fifth major global reanalysis produced by European Centre for Medium-Range Weather Forecasts (ECMWF) (ERA5) reanalysis data from 1985 to 2014, following a 5-yr spinup period. It focuses on daily maximum and minimum temperatures and daily precipitation, comparing CCAM to ERA5 and the Australian Gridded Climate Data (AGCD). The CCAM effectively reduces warm biases in daily minimum temperatures but struggles with cold biases in daily maximum temperatures, particularly in northern Australia during the wet season, possibly due to high-level cloud overestimation. Precipitation tends to be overestimated, especially in extreme rainfall events, though offset by an underestimation of low rainfall. The study showcases improvements in the annual minimum of daily minimum temperatures across most of Australia, while identifying challenges in forecasting cooler extreme temperatures. It adds value to annual maximum daily maximum temperatures in southern Australia but less so in the north. The analysis of the 5% annual exceedance probability (AEP5%) yields mixed results influenced by location and potential ocean temperature changes. Some coastal areas exhibit lost value, possibly linked to ocean temperature shifts. Furthermore, CCAM’s representation of maximum annual daily and 5-day rainfall reveals lost value, particularly in eastern Australia due to an overestimate of extreme rainfall. Despite the challenges of comparing a dynamical downscaling model like CCAM to ERA5, this study highlights its benefits in reducing biases, especially in temperature representation. Given the larger biases in phase 6 of Coupled Model Intercomparison Project (CMIP6) global climate models, CCAM appears suitable for dynamic downscaling in climate projections, emphasizing the need for ongoing model enhancements, including addressing biases related to ephemeral water bodies and extreme rainfall.
Significance Statement
This study critically assesses the performance of the Conformal Cubic Atmospheric Model (CCAM) in dynamically downscaling ERA5 reanalysis data from 1985 to 2014, offering valuable insights into climate modeling. Focusing on temperature and precipitation, CCAM proves effective in mitigating warm biases in daily minimum temperatures but encounters challenges with cold biases in daily maximum temperatures, particularly in northern Australia. The analysis reveals the overestimation of precipitation, especially in extreme events, yet identifies improvements in annual minimum daily minimum temperatures across Australia. The study underscores CCAM’s potential in reducing biases compared to CMIP6 global climate models, making it a promising tool for dynamic downscaling in climate projections. It emphasizes the necessity for ongoing model enhancements, particularly addressing biases related to ephemeral water bodies and extreme rainfall.
Abstract
This study evaluates the performance of the Conformal Cubic Atmospheric Model (CCAM) in dynamically downscaling fifth major global reanalysis produced by European Centre for Medium-Range Weather Forecasts (ECMWF) (ERA5) reanalysis data from 1985 to 2014, following a 5-yr spinup period. It focuses on daily maximum and minimum temperatures and daily precipitation, comparing CCAM to ERA5 and the Australian Gridded Climate Data (AGCD). The CCAM effectively reduces warm biases in daily minimum temperatures but struggles with cold biases in daily maximum temperatures, particularly in northern Australia during the wet season, possibly due to high-level cloud overestimation. Precipitation tends to be overestimated, especially in extreme rainfall events, though offset by an underestimation of low rainfall. The study showcases improvements in the annual minimum of daily minimum temperatures across most of Australia, while identifying challenges in forecasting cooler extreme temperatures. It adds value to annual maximum daily maximum temperatures in southern Australia but less so in the north. The analysis of the 5% annual exceedance probability (AEP5%) yields mixed results influenced by location and potential ocean temperature changes. Some coastal areas exhibit lost value, possibly linked to ocean temperature shifts. Furthermore, CCAM’s representation of maximum annual daily and 5-day rainfall reveals lost value, particularly in eastern Australia due to an overestimate of extreme rainfall. Despite the challenges of comparing a dynamical downscaling model like CCAM to ERA5, this study highlights its benefits in reducing biases, especially in temperature representation. Given the larger biases in phase 6 of Coupled Model Intercomparison Project (CMIP6) global climate models, CCAM appears suitable for dynamic downscaling in climate projections, emphasizing the need for ongoing model enhancements, including addressing biases related to ephemeral water bodies and extreme rainfall.
Significance Statement
This study critically assesses the performance of the Conformal Cubic Atmospheric Model (CCAM) in dynamically downscaling ERA5 reanalysis data from 1985 to 2014, offering valuable insights into climate modeling. Focusing on temperature and precipitation, CCAM proves effective in mitigating warm biases in daily minimum temperatures but encounters challenges with cold biases in daily maximum temperatures, particularly in northern Australia. The analysis reveals the overestimation of precipitation, especially in extreme events, yet identifies improvements in annual minimum daily minimum temperatures across Australia. The study underscores CCAM’s potential in reducing biases compared to CMIP6 global climate models, making it a promising tool for dynamic downscaling in climate projections. It emphasizes the necessity for ongoing model enhancements, particularly addressing biases related to ephemeral water bodies and extreme rainfall.
Abstract
Annual wheat yields have steadily risen over the past century, but harvests remain highly variable and dependent on myriad weather conditions during a long growing season. In Kansas, for example, the 2014 crop year brought the lowest average yield in decades at 28 bushels per acre, while in 2016 farmers in the Wheat State, as Kansas is often called, enjoyed a historic high of 57 bushels per acre. It is broadly known that remote forces like El Niño–Southern Oscillation contribute to meteorological outcomes across North America, including in the wheat-growing regions of the U.S. Midwest, but the differential imprints of ENSO phases and flavors have not been well explored as leading indicators for harvest outcomes in highly specific agricultural regions, such as the more than 7 million acres upon which wheat is grown in Kansas. Here, we demonstrate a strong, steady, and long-term association between a simple “wheat yield index” and sea surface temperature anomalies, more than a year earlier, in the East Pacific, potentially offering insights into forthcoming harvest yields several seasons before planting commences.
Abstract
Annual wheat yields have steadily risen over the past century, but harvests remain highly variable and dependent on myriad weather conditions during a long growing season. In Kansas, for example, the 2014 crop year brought the lowest average yield in decades at 28 bushels per acre, while in 2016 farmers in the Wheat State, as Kansas is often called, enjoyed a historic high of 57 bushels per acre. It is broadly known that remote forces like El Niño–Southern Oscillation contribute to meteorological outcomes across North America, including in the wheat-growing regions of the U.S. Midwest, but the differential imprints of ENSO phases and flavors have not been well explored as leading indicators for harvest outcomes in highly specific agricultural regions, such as the more than 7 million acres upon which wheat is grown in Kansas. Here, we demonstrate a strong, steady, and long-term association between a simple “wheat yield index” and sea surface temperature anomalies, more than a year earlier, in the East Pacific, potentially offering insights into forthcoming harvest yields several seasons before planting commences.
Abstract
This study investigates the impact of initial conditions/boundary conditions (ICs/BCs) and horizontal resolutions on forecast for average weather conditions, focusing on low-level weather variables such as 2-m temperature (T2m), 2-m water vapor mixing ratio (Q2m), and 10-m wind speed (WS10). A Weather Research and Forecasting (WRF) Model is used for regional mesoscale model simulations and large-eddy simulations (LESs). The 6-h-interval forecast fields generated by the Global Forecast System of the National Centers for Environmental Prediction and the Korean Integrated Model of the Korea Meteorological Administration are utilized as ICs/BCs for the regional models. Numerical experiments are performed for 24 h starting at 0000 UTC on each day in April 2021 when the average monthly wind speed was strongest during 10 years (2011–20). A comparison of model simulations with observations obtained around the Yeongjong Island, where Incheon International Airport is situated, shows that the regional models capture the time series of T2m, Q2m, and WS10 more effectively than the global model forecasts. Moreover, the LES experiments with a 100-m horizontal grid spacing simulate higher Q2m and lower WS10 during the daytime compared to the 1-km WRF. This results in a deterioration of their time-series correlation with the observations. Meanwhile, the 100-m LES forecasts time series of T2m over ocean stations and Q2m over land stations, as well as probability density functions of low-level weather variables, more accurately than that of the 1-km WRF. Our study also emphasizes the need for caution when comparing high-resolution model results with observation values at specific stations due to the high spatial variability in low-level meteorological fields.
Abstract
This study investigates the impact of initial conditions/boundary conditions (ICs/BCs) and horizontal resolutions on forecast for average weather conditions, focusing on low-level weather variables such as 2-m temperature (T2m), 2-m water vapor mixing ratio (Q2m), and 10-m wind speed (WS10). A Weather Research and Forecasting (WRF) Model is used for regional mesoscale model simulations and large-eddy simulations (LESs). The 6-h-interval forecast fields generated by the Global Forecast System of the National Centers for Environmental Prediction and the Korean Integrated Model of the Korea Meteorological Administration are utilized as ICs/BCs for the regional models. Numerical experiments are performed for 24 h starting at 0000 UTC on each day in April 2021 when the average monthly wind speed was strongest during 10 years (2011–20). A comparison of model simulations with observations obtained around the Yeongjong Island, where Incheon International Airport is situated, shows that the regional models capture the time series of T2m, Q2m, and WS10 more effectively than the global model forecasts. Moreover, the LES experiments with a 100-m horizontal grid spacing simulate higher Q2m and lower WS10 during the daytime compared to the 1-km WRF. This results in a deterioration of their time-series correlation with the observations. Meanwhile, the 100-m LES forecasts time series of T2m over ocean stations and Q2m over land stations, as well as probability density functions of low-level weather variables, more accurately than that of the 1-km WRF. Our study also emphasizes the need for caution when comparing high-resolution model results with observation values at specific stations due to the high spatial variability in low-level meteorological fields.
Abstract
Extreme heat such as that seen in the United States and Europe in summer 2022 can have significant impacts on human health and infrastructure. The Occupational Safety and Health Administration (OSHA) and the U.S. Army use wet-bulb globe temperature (WBGT) to quantify the impact of heat on workers and inform decisions on workload. WBGT is a weighted average of air temperature, natural wet-bulb temperature, and black globe temperature. A local hourly, daily, and monthly WBGT climatology will allow those planning outdoor work to minimize the likelihood of heat-related disruptions. In this study, WBGT is calculated from the ERA5 reanalysis and is validated by the Oklahoma Mesonet and found to be adequate. Two common methods of calculating WBGT from meteorological observations are compared. The Liljegren method has a larger diurnal cycle than the Dimiceli method, with a peak WBGT about 1°F higher. The high- and extreme-risk categories in the southern U.S. Great Plains (USGP) have increased from 5 days per year to 15 days from 1960 to 2020. Additionally, the largest increases in WBGT are occurring during DJF, potentially lengthening the warm season in the future. Heat wave definitions based on maximum, minimum, and mean WBGT are used to calculate heat wave characteristics and trends with the largest number of heat waves occurring in the southern USGP. Further, the number of heat waves is generally increasing across the domain. This study shows that heat wave days based on minimum WBGT have increased significantly which could have important impacts on human heat stress recovery.
Abstract
Extreme heat such as that seen in the United States and Europe in summer 2022 can have significant impacts on human health and infrastructure. The Occupational Safety and Health Administration (OSHA) and the U.S. Army use wet-bulb globe temperature (WBGT) to quantify the impact of heat on workers and inform decisions on workload. WBGT is a weighted average of air temperature, natural wet-bulb temperature, and black globe temperature. A local hourly, daily, and monthly WBGT climatology will allow those planning outdoor work to minimize the likelihood of heat-related disruptions. In this study, WBGT is calculated from the ERA5 reanalysis and is validated by the Oklahoma Mesonet and found to be adequate. Two common methods of calculating WBGT from meteorological observations are compared. The Liljegren method has a larger diurnal cycle than the Dimiceli method, with a peak WBGT about 1°F higher. The high- and extreme-risk categories in the southern U.S. Great Plains (USGP) have increased from 5 days per year to 15 days from 1960 to 2020. Additionally, the largest increases in WBGT are occurring during DJF, potentially lengthening the warm season in the future. Heat wave definitions based on maximum, minimum, and mean WBGT are used to calculate heat wave characteristics and trends with the largest number of heat waves occurring in the southern USGP. Further, the number of heat waves is generally increasing across the domain. This study shows that heat wave days based on minimum WBGT have increased significantly which could have important impacts on human heat stress recovery.
Abstract
Polarimetric variables such as differential phase ΦDP and its range derivative, specific differential phase K DP, contain useful information for improving quantitative precipitation estimation (QPE) and microphysics retrieval. However, the usefulness of the current operationally utilized estimation method of K DP is limited by measurement error and artifacts resulting from the differential backscattering phase δ. The contribution of δ can significantly influence the ΦDP measurements and therefore negatively affect the K DP estimates. Neglecting the presence of δ within non-Rayleigh scattering regimes has also led to the adoption of incorrect terminology regarding signatures seen within current operational K DP estimates implying associated regions of unrealistic liquid water content. A new processing method is proposed and developed to estimate both K DP and δ using classification and linear programming (LP) to reduce bias in K DP estimates caused by the δ component. It is shown that by applying the LP technique specifically to the rain regions of Rayleigh scattering along a radial profile, accurate estimates of differential propagation phase, specific differential phase, and differential backscattering phase can be retrieved within regions of both Rayleigh and non-Rayleigh scattering. This new estimation method is applied to cases of reported hail and tornado debris, and the LP results are compared to the operationally utilized least squares fit (LSF) estimates. The results show the potential use of the differential backscattering phase signature in the detection of hail and tornado debris.
Abstract
Polarimetric variables such as differential phase ΦDP and its range derivative, specific differential phase K DP, contain useful information for improving quantitative precipitation estimation (QPE) and microphysics retrieval. However, the usefulness of the current operationally utilized estimation method of K DP is limited by measurement error and artifacts resulting from the differential backscattering phase δ. The contribution of δ can significantly influence the ΦDP measurements and therefore negatively affect the K DP estimates. Neglecting the presence of δ within non-Rayleigh scattering regimes has also led to the adoption of incorrect terminology regarding signatures seen within current operational K DP estimates implying associated regions of unrealistic liquid water content. A new processing method is proposed and developed to estimate both K DP and δ using classification and linear programming (LP) to reduce bias in K DP estimates caused by the δ component. It is shown that by applying the LP technique specifically to the rain regions of Rayleigh scattering along a radial profile, accurate estimates of differential propagation phase, specific differential phase, and differential backscattering phase can be retrieved within regions of both Rayleigh and non-Rayleigh scattering. This new estimation method is applied to cases of reported hail and tornado debris, and the LP results are compared to the operationally utilized least squares fit (LSF) estimates. The results show the potential use of the differential backscattering phase signature in the detection of hail and tornado debris.
Abstract
The paper aims to demonstrate how to enhance the accuracy of offshore wind resource estimation, specifically by incorporating near-surface satellite-derived wind observations into mesoscale models. We utilized the Weather Research and Forecasting (WRF) Model and applied observational nudging by integrating ASCAT data over offshore areas to achieve this. We then evaluated the accuracy of the nudged WRF Model simulations by comparing them with data from ocean oil platforms, tall masts, and a wind lidar mounted on a commercial ferry crossing the southern Baltic Sea. Our findings indicate that including satellite-derived ASCAT wind speeds through nudging enhances the correlation and reduces the error of the mesoscale simulations across all validation platforms. Moreover, it consistently outperforms the control and previously published WRF-based wind atlases. Using satellite-derived winds directly in the model simulations also solves the issue of lifting near-surface winds to wind turbine heights, which has been challenging in estimating wind resources at such heights. The comparison of the 1-yr-long simulations with and without nudging reveals intriguing differences in the sign and magnitude between the Baltic and North Seas, which vary seasonally. The pattern highlights a distinct regional pattern attributed to regional dynamics, sea surface temperature, atmospheric stability, and the number of available ASCAT samples.
Significance Statement
We aim to showcase a method for improving the precision of hub-height estimation of wind resources offshore. This involves integrating wind observations obtained from near-surface satellites into the model simulations. To assess the accuracy of the simulations, we compare the simulated winds to data gathered from multiple offshore sources, including oil platforms, tall masts, and a wind lidar installed on a commercial ferry.
Abstract
The paper aims to demonstrate how to enhance the accuracy of offshore wind resource estimation, specifically by incorporating near-surface satellite-derived wind observations into mesoscale models. We utilized the Weather Research and Forecasting (WRF) Model and applied observational nudging by integrating ASCAT data over offshore areas to achieve this. We then evaluated the accuracy of the nudged WRF Model simulations by comparing them with data from ocean oil platforms, tall masts, and a wind lidar mounted on a commercial ferry crossing the southern Baltic Sea. Our findings indicate that including satellite-derived ASCAT wind speeds through nudging enhances the correlation and reduces the error of the mesoscale simulations across all validation platforms. Moreover, it consistently outperforms the control and previously published WRF-based wind atlases. Using satellite-derived winds directly in the model simulations also solves the issue of lifting near-surface winds to wind turbine heights, which has been challenging in estimating wind resources at such heights. The comparison of the 1-yr-long simulations with and without nudging reveals intriguing differences in the sign and magnitude between the Baltic and North Seas, which vary seasonally. The pattern highlights a distinct regional pattern attributed to regional dynamics, sea surface temperature, atmospheric stability, and the number of available ASCAT samples.
Significance Statement
We aim to showcase a method for improving the precision of hub-height estimation of wind resources offshore. This involves integrating wind observations obtained from near-surface satellites into the model simulations. To assess the accuracy of the simulations, we compare the simulated winds to data gathered from multiple offshore sources, including oil platforms, tall masts, and a wind lidar installed on a commercial ferry.
