Browse

You are looking at 1 - 10 of 8,137 items for :

  • Journal of Applied Meteorology and Climatology x
  • Refine by Access: Content accessible to me x
Clear All
Yousuke Sato
,
Moeka Kamada
,
Akihiro Hashimoto
, and
Masaru Inatsu

Abstract

This study examined future changes in the microphysical properties of surface solid precipitation over Hokkaido, Japan. A process-tracking model that predicts the mass of the hydrometeors generated by each cloud microphysical process was implemented in a meteorological model. This implementation aimed to analyze the mass fraction of hydrometeors resulting from depositional growth and the riming process to the total mass of surface solid precipitation. Results from pseudo–global warming experiments suggest two potential future changes in the characteristics of surface solid precipitation over Hokkaido. First, the rimed particles are expected to increase and be dominant over the west and northwest coast of Hokkaido, where heavy snowfall occurs primarily due to the lake effect. Second, the mass fraction from depositional growth under relatively higher temperatures is expected to increase. This increase is anticipated to be dominant over the eastern part and mountainous area of Hokkaido. Additionally, the fraction of liquid precipitation to total precipitation is expected to increase in the future. These results suggest that the microphysical properties of solid precipitation in Hokkaido are expected to be similar to those observed in the current climate over Hokuriku, the central part of Japan even in warmer climate conditions.

Significance Statement

This study examines potential future changes in the growth processes contributing to surface precipitation particles in Hokkaido, Japan. The surface solid precipitation particles in the western and eastern regions of Hokkaido are mainly generated through depositional growth that occurs within the temperature ranges −36° to −20°C and −20° to −10°C, respectively. A future shift is anticipated, with riming becoming the primary process. This shift suggests that snowfall particles will be heavier than those in the current climate, which would increase the snow-removal workload. The change in precipitation characteristics could influence adaptation and mitigation strategies for climate change in cold regions.

Open access
Igor Yanovsky
,
Derek J. Posselt
,
Longtao Wu
, and
Svetla Hristova-Veleva

Abstract

This study explores the performance of a dense optical flow method in comparison to pattern-matching techniques for retrieving atmospheric motion vectors (AMVs) from water vapor images. Using high-resolution simulated datasets that represent various weather phenomena, we assess the performance of these methods across different weather regimes, time intervals, and pressure levels and quantify the uncertainties associated with retrieved winds. The optical flow algorithm consistently outperforms the feature matching approach. Notably, it produces wind speeds and AMVs that closely resemble the wind fields from the simulations, and unlike the feature matching algorithm, the optical flow algorithm exhibits consistent performance across different time intervals. In contrast, the feature matching approach yields vector fields that exhibit oversmoothing in certain areas and erratic behavior in others, while also producing less detailed, regionally constant speed maps. Furthermore, unlike feature matching, the optical flow method effectively calculates AMV near regions with missing data, generating a dense AMV field for every pixel in a pair of images. This superior performance and flexibility significantly influence the planning for future satellite missions aimed at retrieving atmospheric winds. As such, our work plays a critical role in determining the mission architecture and projected instrument performance for future atmospheric wind retrieval satellite missions. The study underscores the potential of the optical flow algorithm as a robust and efficient approach for atmospheric motion retrieval, thus contributing to advances in climate research and weather prediction.

Significance Statement

This research investigates the efficacy of two methods, optical flow and feature matching, for detecting atmospheric winds, referred to as atmospheric motion vectors, from satellite images of water vapor. Employing detailed simulated datasets that replicate real-world weather patterns, we found that optical flow consistently outperforms feature matching in various aspects. Notably, the optical flow method is not only more precise but also maintains its accuracy across different scenarios. These insights are critical for the design of future satellite missions focused on advancing our understanding of the atmosphere and enhancing weather predictions. This study contributes to advancements in climate research and supports improved weather forecasting, benefiting both scientific and societal needs.

Open access
Luis Rodrigo Asturias Schaub
and
Luis Alberiko Gil-Alana

Abstract

In this article, we examine the time-series properties of the temperatures in Latin America. We look at the presence of time trends in the context of potential long-memory processes, looking at the average, maximum, and minimum values from 1901 to 2021. Our results indicate that when looking at the average data, there is a tendency to return to the mean value in all cases. However, it is noted that in the cases of Guatemala, Mexico, and Brazil, which are the countries with the highest degree of integration, the process of reversion could take longer than in the remaining countries. We also point out that the time trend coefficient is significantly positive in practically all cases, especially in temperatures in the Caribbean islands such as Antigua and Barbuda, Aruba, and the British Virgin Islands. When analyzing the maximum and minimum temperatures, the highest degrees of integration are observed in the minimum values, and the highest values are obtained again in Brazil, Guatemala, and Mexico. The time trend coefficients are significantly positive in almost all cases, with the only two exceptions being Bolivia and Paraguay. Looking at the range (i.e., the difference between maximum and minimum temperatures), evidence of orders of integration above 0.5 is found in nine countries (Aruba, Brazil, Colombia, Cuba, Ecuador, Haiti, Panama, the Turks and Caicos Islands, and Venezuela), implying that shocks in the range will take longer to disappear than in the rest of the countries.

Open access
Benjamin J. E. Schroeter
,
Benjamin Ng
,
Alicia Takbash
,
Tony Rafter
, and
Marcus Thatcher

Abstract

This study evaluates the performance of the Conformal Cubic Atmospheric Model (CCAM) in dynamically downscaling fifth major global reanalysis produced by European Centre for Medium-Range Weather Forecasts (ECMWF) (ERA5) reanalysis data from 1985 to 2014, following a 5-yr spinup period. It focuses on daily maximum and minimum temperatures and daily precipitation, comparing CCAM to ERA5 and the Australian Gridded Climate Data (AGCD). The CCAM effectively reduces warm biases in daily minimum temperatures but struggles with cold biases in daily maximum temperatures, particularly in northern Australia during the wet season, possibly due to high-level cloud overestimation. Precipitation tends to be overestimated, especially in extreme rainfall events, though offset by an underestimation of low rainfall. The study showcases improvements in the annual minimum of daily minimum temperatures across most of Australia, while identifying challenges in forecasting cooler extreme temperatures. It adds value to annual maximum daily maximum temperatures in southern Australia but less so in the north. The analysis of the 5% annual exceedance probability (AEP5%) yields mixed results influenced by location and potential ocean temperature changes. Some coastal areas exhibit lost value, possibly linked to ocean temperature shifts. Furthermore, CCAM’s representation of maximum annual daily and 5-day rainfall reveals lost value, particularly in eastern Australia due to an overestimate of extreme rainfall. Despite the challenges of comparing a dynamical downscaling model like CCAM to ERA5, this study highlights its benefits in reducing biases, especially in temperature representation. Given the larger biases in phase 6 of Coupled Model Intercomparison Project (CMIP6) global climate models, CCAM appears suitable for dynamic downscaling in climate projections, emphasizing the need for ongoing model enhancements, including addressing biases related to ephemeral water bodies and extreme rainfall.

Significance Statement

This study critically assesses the performance of the Conformal Cubic Atmospheric Model (CCAM) in dynamically downscaling ERA5 reanalysis data from 1985 to 2014, offering valuable insights into climate modeling. Focusing on temperature and precipitation, CCAM proves effective in mitigating warm biases in daily minimum temperatures but encounters challenges with cold biases in daily maximum temperatures, particularly in northern Australia. The analysis reveals the overestimation of precipitation, especially in extreme events, yet identifies improvements in annual minimum daily minimum temperatures across Australia. The study underscores CCAM’s potential in reducing biases compared to CMIP6 global climate models, making it a promising tool for dynamic downscaling in climate projections. It emphasizes the necessity for ongoing model enhancements, particularly addressing biases related to ephemeral water bodies and extreme rainfall.

Open access
Matthew D. LaPlante
,
Luthiene Alves Dalanhese
,
Liping Deng
, and
Shih-Yu Simon Wang

Abstract

Annual wheat yields have steadily risen over the past century, but harvests remain highly variable and dependent on myriad weather conditions during a long growing season. In Kansas, for example, the 2014 crop year brought the lowest average yield in decades at 28 bushels per acre, while in 2016 farmers in the Wheat State, as Kansas is often called, enjoyed a historic high of 57 bushels per acre. It is broadly known that remote forces like El Niño–Southern Oscillation contribute to meteorological outcomes across North America, including in the wheat-growing regions of the U.S. Midwest, but the differential imprints of ENSO phases and flavors have not been well explored as leading indicators for harvest outcomes in highly specific agricultural regions, such as the more than 7 million acres upon which wheat is grown in Kansas. Here, we demonstrate a strong, steady, and long-term association between a simple “wheat yield index” and sea surface temperature anomalies, more than a year earlier, in the East Pacific, potentially offering insights into forthcoming harvest yields several seasons before planting commences.

Open access
Yujeong Do
,
Kyo-Sun Sunny Lim
,
Ki-Byung Kim
,
Hyeyum Hailey Shin
,
Eun-Chul Chang
, and
GyuWon Lee

Abstract

This study investigates the impact of initial conditions/boundary conditions (ICs/BCs) and horizontal resolutions on forecast for average weather conditions, focusing on low-level weather variables such as 2-m temperature (T2m), 2-m water vapor mixing ratio (Q2m), and 10-m wind speed (WS10). A Weather Research and Forecasting (WRF) Model is used for regional mesoscale model simulations and large-eddy simulations (LESs). The 6-h-interval forecast fields generated by the Global Forecast System of the National Centers for Environmental Prediction and the Korean Integrated Model of the Korea Meteorological Administration are utilized as ICs/BCs for the regional models. Numerical experiments are performed for 24 h starting at 0000 UTC on each day in April 2021 when the average monthly wind speed was strongest during 10 years (2011–20). A comparison of model simulations with observations obtained around the Yeongjong Island, where Incheon International Airport is situated, shows that the regional models capture the time series of T2m, Q2m, and WS10 more effectively than the global model forecasts. Moreover, the LES experiments with a 100-m horizontal grid spacing simulate higher Q2m and lower WS10 during the daytime compared to the 1-km WRF. This results in a deterioration of their time-series correlation with the observations. Meanwhile, the 100-m LES forecasts time series of T2m over ocean stations and Q2m over land stations, as well as probability density functions of low-level weather variables, more accurately than that of the 1-km WRF. Our study also emphasizes the need for caution when comparing high-resolution model results with observation values at specific stations due to the high spatial variability in low-level meteorological fields.

Open access
Benjamin Davis
,
Elinor R. Martin
, and
Bradley G. Illston

Abstract

Extreme heat such as that seen in the United States and Europe in summer 2022 can have significant impacts on human health and infrastructure. The Occupational Safety and Health Administration (OSHA) and the U.S. Army use wet-bulb globe temperature (WBGT) to quantify the impact of heat on workers and inform decisions on workload. WBGT is a weighted average of air temperature, natural wet-bulb temperature, and black globe temperature. A local hourly, daily, and monthly WBGT climatology will allow those planning outdoor work to minimize the likelihood of heat-related disruptions. In this study, WBGT is calculated from the ERA5 reanalysis and is validated by the Oklahoma Mesonet and found to be adequate. Two common methods of calculating WBGT from meteorological observations are compared. The Liljegren method has a larger diurnal cycle than the Dimiceli method, with a peak WBGT about 1°F higher. The high- and extreme-risk categories in the southern U.S. Great Plains (USGP) have increased from 5 days per year to 15 days from 1960 to 2020. Additionally, the largest increases in WBGT are occurring during DJF, potentially lengthening the warm season in the future. Heat wave definitions based on maximum, minimum, and mean WBGT are used to calculate heat wave characteristics and trends with the largest number of heat waves occurring in the southern USGP. Further, the number of heat waves is generally increasing across the domain. This study shows that heat wave days based on minimum WBGT have increased significantly which could have important impacts on human heat stress recovery.

Open access
Daniel J. Cecil
,
Michael B. Solomon
,
Retha Mecikalski
, and
Kenneth D. Leppert II

Abstract

Using passive microwave brightness temperatures Tb from the Global Precipitation Measurement (GPM) Microwave Imager (GMI) and hydrometeor identification (HID) data from dual-polarization ground radars, empirical lookup tables are developed for a multifrequency estimation of the likelihood a precipitation column includes certain hydrometeor types, as a function of Tb . Eight years of collocated Tb and HID data from the GPM Validation Network are used for development and testing of the GMI-based HID retrieval, with 2015–20 used for training and 2021–22 used for testing the GMI-based HID retrieval. The occurrence of profiles with hail and graupel are both slightly underpredicted by the lookup tables, but the percentage of profiles predicted is highly correlated with the percentage observed (0.98 correlation coefficient for hail and 0.99 for graupel). By having snow appear before rain in the hierarchy, the sample size for rain, without ice aloft, is fairly small, and the percentage of rain profiles is less than snow for all Tb .

Open access
Carl G. Schmitt
,
Dragos Vas
,
Martin Schnaiter
,
Emma Järvinen
,
Lea Hartl
,
Telayna Wong
,
Victor Cassella
, and
Martin Stuefer

Abstract

A three-winter study has been conducted to better understand the relationship between atmospheric conditions and ice fog or diamond dust microphysics. Measurements were conducted east of downtown Fairbanks in interior Alaska during nonprecipitating conditions. Atmospheric conditions were measured with several weather stations around the Fairbanks region and two meteorological temperature profiler instruments (ATTEX MTP-5HE and MTP-5PE). Near-surface ice particle microphysical observations were conducted with the Particle Phase Discriminator mark 2, Karlsruhe edition (PPD-2K), instrument, which measures particles from 8 to 112 μm (sphere equivalent). Panoramic camera images were captured and saved every 10 min throughout the campaign for visual assessment of atmospheric conditions. Machine learning was used to classify both cloud particle microphysical characteristics from the PPD-2K data and to categorize boundary layer conditions using the panoramic camera images. For panoramic camera images, data were categorized as cloudy, clear, fog, snowing, and a nearby power plant plume. For the PPD-2K machine learning study, the scattering pattern images were used to identify rough surface, pristine, sublimating, and spherical particles. Three additional categories were used to identify indeterminant or saturated images. These categories and categories derived from weather station data (e.g., temperature ranges) are used to quantify ice microphysical properties under different conditions. For the complete microphysical dataset, pristine plates or columns accounted for 15.5%, 16.3% appeared to be sublimating particles, and 43.4% were complex particles with either rough surfaces or multiple branches. Although the temperature was as warm as −20°C during measurements, only 1.3% of the particles were classified as liquid.

Significance Statement

Boundary layer ice particles are frequently present in the near-surface atmosphere when surface temperatures drop below −20°C. Substantial human impacts can occur due to visibility degradation and deposition of particles on surfaces. Understanding particle shape, size, and phase (liquid or solid) is important for understanding those impacts. This study presents the results of a 3-yr measurement campaign in Fairbanks, Alaska, in which we relate ice particle characteristics to lower atmospheric conditions. Results should improve weather forecasting and hazard prediction.

Open access
Laurence Coursol
,
Sylvain Heilliette
, and
Pierre Gauthier

Abstract

With hyperspectral instruments measuring radiation emitted by Earth and its atmosphere in the thermal infrared range in multiple channels, several studies were made to select a subset of channels in order to reduce the number of channels to be used in a data assimilation system. An optimal selection of channels based on the information content depends on several factors related to observation and background error statistics and the assimilation system itself. An optimal channel selection for the Cross-track Infrared Sounder (CrIS) was obtained and then compared to selections made for different NWP systems. For instance, the channel selection of Carminati has 224 channels also present in our optimal selection, which includes 455 channels. However, in terms of analysis error variance, the difference between the two selections is small. Integrated over the whole profile, the relative difference is equal to 15.3% and 4.5% for temperature and humidity, respectively. Also, different observation error covariance matrices were considered to evaluate the impact of this matrix on channel selection. Even though the channels selected optimally were different in terms of which channels were selected for the various R matrices, the results in terms of analysis error are similar.

Significance Statement

Satellites measure radiation from Earth and its atmosphere in the thermal infrared. Those radiance data contain thousands of measurements, called channels, and thus, a selection needs to be done retaining most of the information content since the large number of individual pieces of information is not usable for numerical weather prediction systems. The goal of this paper is to find an optimal selection for the instrument CrIS and to compare this selection with selections made for different numerical weather prediction systems. It was found that even though the channels selected optimally were different in terms of which channels were selected compared to other selections, the results in terms of precision of the analysis are similar and the results in terms of analysis error are similar due to the nature of hyperspectral instruments, which have multiple Jacobians overlapping.

Open access