Browse
Abstract
Large-scale meteorological pattern (LSMP)–based analysis is used in a novel way to understand meteorological conditions before and during short-duration dry spells over the northeastern United States. These LSMPs are useful to assess models and select better-performing models for future projections. Dry-spell events are identified from histograms of consecutive dry days below a daily precipitation threshold. Events lasting 12 days or longer, which correspond to ∼10% of dry-spell events, are examined. The 500-hPa streamfunction anomaly fields for the first 12 days of each event are time averaged, and k-means clustering is applied to isolate the dry-spell-related LSMPs. The first cluster has a strong low pressure anomaly over the Atlantic Ocean, southeast of the region, and is more common in winter and spring. The second cluster has strong high pressure over east-central North America and is most common during autumn. Over the region, both clusters have negative specific humidity anomalies, negative integrated vapor transport from the north, and subsidence associated with a midlatitude jet stream dipole structure that reinforces upper-level convergence. Subsidence is supported by cold-air advection in the first cluster and the location on the east side of the lower-level high pressure in the second cluster. Extratropical cyclone storm tracks are generally shifted southward of the region during the dry spells. Individual events lie on a continuum between two distinct clusters. These clusters have similar local, but different remote, properties. Although dry spells occur with greater frequency during drought months, most dry spells occur during nondrought months.
Significance Statement
This study examines the large-scale weather patterns and meteorological conditions associated with dry-spell events lasting at least 2 weeks while affecting the northeastern United States. A statistical approach groups events together on the basis of similar atmospheric features. We find two distinct sets of patterns that we call large-scale meteorological patterns. These patterns reduce moisture, foster localized sinking, and shift the storm track southward along the Atlantic seaboard, all of which reduce precipitation. Besides greater understanding, knowing the meteorological patterns during short-term dryness in the region provides an important tool to assess how well atmospheric models reproduce these specific patterns. More dry spells occur in nondrought months than in drought months, which means that dry spells can occur without preexisting drought conditions.
Abstract
Large-scale meteorological pattern (LSMP)–based analysis is used in a novel way to understand meteorological conditions before and during short-duration dry spells over the northeastern United States. These LSMPs are useful to assess models and select better-performing models for future projections. Dry-spell events are identified from histograms of consecutive dry days below a daily precipitation threshold. Events lasting 12 days or longer, which correspond to ∼10% of dry-spell events, are examined. The 500-hPa streamfunction anomaly fields for the first 12 days of each event are time averaged, and k-means clustering is applied to isolate the dry-spell-related LSMPs. The first cluster has a strong low pressure anomaly over the Atlantic Ocean, southeast of the region, and is more common in winter and spring. The second cluster has strong high pressure over east-central North America and is most common during autumn. Over the region, both clusters have negative specific humidity anomalies, negative integrated vapor transport from the north, and subsidence associated with a midlatitude jet stream dipole structure that reinforces upper-level convergence. Subsidence is supported by cold-air advection in the first cluster and the location on the east side of the lower-level high pressure in the second cluster. Extratropical cyclone storm tracks are generally shifted southward of the region during the dry spells. Individual events lie on a continuum between two distinct clusters. These clusters have similar local, but different remote, properties. Although dry spells occur with greater frequency during drought months, most dry spells occur during nondrought months.
Significance Statement
This study examines the large-scale weather patterns and meteorological conditions associated with dry-spell events lasting at least 2 weeks while affecting the northeastern United States. A statistical approach groups events together on the basis of similar atmospheric features. We find two distinct sets of patterns that we call large-scale meteorological patterns. These patterns reduce moisture, foster localized sinking, and shift the storm track southward along the Atlantic seaboard, all of which reduce precipitation. Besides greater understanding, knowing the meteorological patterns during short-term dryness in the region provides an important tool to assess how well atmospheric models reproduce these specific patterns. More dry spells occur in nondrought months than in drought months, which means that dry spells can occur without preexisting drought conditions.
Abstract
While GCM horizontal resolution has received the majority of scale improvements in recent years, ample evidence suggests that a model’s vertical resolution exerts a strong control on its ability to accurately simulate the physics of the marine boundary layer. Here we show that, regardless of parameter tuning, the ability of a single-column model (SCM) to simulate the subtropical marine boundary layer improves when its vertical resolution is improved. We introduce a novel objective tuning technique to optimize the parameters of an SCM against profiles of temperature and moisture and their turbulent fluxes, horizontal winds, cloud water, and rainwater from large-eddy simulations (LES). We use this method to identify optimal parameters for simulating marine stratocumulus and shallow cumulus. The novel tuning method utilizes an objective performance metric that accounts for the uncertainty in the LES output, including the covariability between model variables. Optimization is performed independently for different vertical grid spacings and value of time step, ranging from coarse scales often used in current global models (120 m, 180 s) to fine scales often used in parameterization development and large-eddy simulations (10 m, 15 s). Uncertainty-weighted disagreement between the SCM and LES decreases by a factor of ∼5 when vertical grid spacing is improved from 120 to 10 m, with time step reductions being of secondary importance. Model performance is shown to converge at a vertical grid spacing of 20 m, with further refinements to 10 m leading to little further improvement.
Significance Statement
In successive generations of computer models that simulate Earth’s atmosphere, improvements have been mainly accomplished by reducing the horizontal sizes of discretized grid boxes, while the vertical grid spacing has seen comparatively lesser refinements. Here we advocate for additional attention to be paid to the number of vertical layers in these models, especially in the model layers closest to Earth’s surface where climatologically important marine stratocumulus and shallow cumulus clouds reside. Our experiments show that the ability of a one-dimensional model to represent physical processes important to these clouds is strongly dependent on the model’s vertical grid spacing.
Abstract
While GCM horizontal resolution has received the majority of scale improvements in recent years, ample evidence suggests that a model’s vertical resolution exerts a strong control on its ability to accurately simulate the physics of the marine boundary layer. Here we show that, regardless of parameter tuning, the ability of a single-column model (SCM) to simulate the subtropical marine boundary layer improves when its vertical resolution is improved. We introduce a novel objective tuning technique to optimize the parameters of an SCM against profiles of temperature and moisture and their turbulent fluxes, horizontal winds, cloud water, and rainwater from large-eddy simulations (LES). We use this method to identify optimal parameters for simulating marine stratocumulus and shallow cumulus. The novel tuning method utilizes an objective performance metric that accounts for the uncertainty in the LES output, including the covariability between model variables. Optimization is performed independently for different vertical grid spacings and value of time step, ranging from coarse scales often used in current global models (120 m, 180 s) to fine scales often used in parameterization development and large-eddy simulations (10 m, 15 s). Uncertainty-weighted disagreement between the SCM and LES decreases by a factor of ∼5 when vertical grid spacing is improved from 120 to 10 m, with time step reductions being of secondary importance. Model performance is shown to converge at a vertical grid spacing of 20 m, with further refinements to 10 m leading to little further improvement.
Significance Statement
In successive generations of computer models that simulate Earth’s atmosphere, improvements have been mainly accomplished by reducing the horizontal sizes of discretized grid boxes, while the vertical grid spacing has seen comparatively lesser refinements. Here we advocate for additional attention to be paid to the number of vertical layers in these models, especially in the model layers closest to Earth’s surface where climatologically important marine stratocumulus and shallow cumulus clouds reside. Our experiments show that the ability of a one-dimensional model to represent physical processes important to these clouds is strongly dependent on the model’s vertical grid spacing.
Abstract
While numerous modeling studies have focused on the interaction of ocean surface waves with the atmospheric boundary layer, most employ idealized waves that are either monochromatic or synthetically generated from a theoretical wave spectrum, and the atmospheric solvers are typically incompressible. To study wind–wave coupling in real-world scenarios, a model that can simulate both realistic meteorological and wave conditions is necessary. In this paper we describe the implementation of a moving bottom boundary condition into the Weather Research and Forecasting Model for large-eddy simulation applications. We first describe the moving bottom boundary conditions within WRF’s pressure-based vertical coordinate system. We then validate our code with idealized test cases that have analytical solutions, including flow over a monochromatic wave with and without viscosity. Finally, we present results from turbulent flows over a moving monochromatic wave with different wave ages, and demonstrate satisfactory agreement of the wave growth rate with results from the literature. We also compare atmospheric stress and wind parameters from two physically equivalent cases. The first specifies a wind moving in the same direction as a propagating wave, while the second involves a stationary wave with the wind adjusted such that the wind relative to the wave is the same as in the first case. Results indicate that the velocity and Reynolds stress profiles for the two cases match, further validating the moving bottom implementation.
Abstract
While numerous modeling studies have focused on the interaction of ocean surface waves with the atmospheric boundary layer, most employ idealized waves that are either monochromatic or synthetically generated from a theoretical wave spectrum, and the atmospheric solvers are typically incompressible. To study wind–wave coupling in real-world scenarios, a model that can simulate both realistic meteorological and wave conditions is necessary. In this paper we describe the implementation of a moving bottom boundary condition into the Weather Research and Forecasting Model for large-eddy simulation applications. We first describe the moving bottom boundary conditions within WRF’s pressure-based vertical coordinate system. We then validate our code with idealized test cases that have analytical solutions, including flow over a monochromatic wave with and without viscosity. Finally, we present results from turbulent flows over a moving monochromatic wave with different wave ages, and demonstrate satisfactory agreement of the wave growth rate with results from the literature. We also compare atmospheric stress and wind parameters from two physically equivalent cases. The first specifies a wind moving in the same direction as a propagating wave, while the second involves a stationary wave with the wind adjusted such that the wind relative to the wave is the same as in the first case. Results indicate that the velocity and Reynolds stress profiles for the two cases match, further validating the moving bottom implementation.
Abstract
Old descriptive diaries are important sources of daily weather conditions before modern instrumental measurements were available. A previous study demonstrated the potential of reconstructing historical weather at a high temporal resolution by assimilating cloud cover converted from descriptive diaries. However, cloud cover often exhibits a non-Gaussian distribution, which violates the basic assumptions of most data assimilation schemes. In this study, we applied a Gaussian transformation (GT) approach to cloud cover data assimilation and conducted observing system simulation experiments (OSSEs) using 20 observation points over Japan. We performed experiments to assimilate cloud cover with large observational errors using the Global Spectral Model (GSM) and a local ensemble transform Kalman filter (LETKF). Without GT, meridional wind and temperature exhibited deteriorations in the lower troposphere compared with the experiment with no observations. In contrast, GT reduced the 2-month root-mean-square errors (RMSEs) by 5%–15% throughout the troposphere for wind, temperature, and specific humidity fields. Significant improvements include zonal wind at 500 hPa and temperature at 850 hPa with 6.4% and 7.3% improvements by GT, respectively, compared with the experiment without GT. We further demonstrate that the additional GT application to the precipitation background field improves precipitation estimation by 12.2%, with pronounced improvements over regions with monthly precipitation of less than 150 mm. We also explored the impact of cloud cover GT on a global scale and confirmed improvements extending from around the observation sites. Our results demonstrate the potential of GT in high-resolution historical weather reconstruction using old descriptive diaries.
Significance Statement
To reconstruct the historical weather, cloud cover information from old diaries can be used by incorporating high-resolution model simulations. However, cloud cover is not normally distributed and violates an important assumption when combining cloud cover observations with model simulations. Our results demonstrate that transforming the cloud cover distribution into a normal distribution could improve wind speed, temperature, and humidity fields in the model. We demonstrate the critical role of the transformation in a nonnormally distributed variable when combined with models and show the potential of diary-based weather information to reconstruct historical weather.
Abstract
Old descriptive diaries are important sources of daily weather conditions before modern instrumental measurements were available. A previous study demonstrated the potential of reconstructing historical weather at a high temporal resolution by assimilating cloud cover converted from descriptive diaries. However, cloud cover often exhibits a non-Gaussian distribution, which violates the basic assumptions of most data assimilation schemes. In this study, we applied a Gaussian transformation (GT) approach to cloud cover data assimilation and conducted observing system simulation experiments (OSSEs) using 20 observation points over Japan. We performed experiments to assimilate cloud cover with large observational errors using the Global Spectral Model (GSM) and a local ensemble transform Kalman filter (LETKF). Without GT, meridional wind and temperature exhibited deteriorations in the lower troposphere compared with the experiment with no observations. In contrast, GT reduced the 2-month root-mean-square errors (RMSEs) by 5%–15% throughout the troposphere for wind, temperature, and specific humidity fields. Significant improvements include zonal wind at 500 hPa and temperature at 850 hPa with 6.4% and 7.3% improvements by GT, respectively, compared with the experiment without GT. We further demonstrate that the additional GT application to the precipitation background field improves precipitation estimation by 12.2%, with pronounced improvements over regions with monthly precipitation of less than 150 mm. We also explored the impact of cloud cover GT on a global scale and confirmed improvements extending from around the observation sites. Our results demonstrate the potential of GT in high-resolution historical weather reconstruction using old descriptive diaries.
Significance Statement
To reconstruct the historical weather, cloud cover information from old diaries can be used by incorporating high-resolution model simulations. However, cloud cover is not normally distributed and violates an important assumption when combining cloud cover observations with model simulations. Our results demonstrate that transforming the cloud cover distribution into a normal distribution could improve wind speed, temperature, and humidity fields in the model. We demonstrate the critical role of the transformation in a nonnormally distributed variable when combined with models and show the potential of diary-based weather information to reconstruct historical weather.
Abstract
This study aims to objectively identify storm-scale characteristics associated with tornado-like vortex (TLV) formation in an ensemble of high-resolution supercell simulations. An ensemble of 51 supercells is created using Cloud Model version 1 (CM1). The first member is initialized using a base state populated by the Rapid Update Cycle (RUC) proximity sounding near El Reno, Oklahoma, on 24 May 2011. The other 50 ensemble members are created by randomly perturbing the base state after a supercell has formed. There is considerable spread between ensemble members, with some supercells producing strong, long-lived TLVs, while others do not produce a TLV at all. The ensemble is analyzed using the ensemble sensitivity analysis (ESA) technique, uncovering storm-scale characteristics that are dynamically relevant to TLV formation. In the rear flank, divergence at the surface southeast of the TLV helps converge and contract existing vertical vorticity, but there is no meaningful sensitivity to rear-flank outflow temperature. In the forward flank, warm temperatures within the cold pool are important to TLV production and magnitude. The longitudinal positioning of strong streamwise vorticity is also a clear indicator of TLV formation and strength, especially within 5 min of when the TLV is measured.
Significance Statement
Tornadoes that form in supercell thunderstorms (long-lived storms with a rotating updraft) are heavily influenced by the features created by the storm itself, such as the temperature of a downdraft. In this study, many different iterations of a strong supercell thunderstorm are simulated, in which tornado-like features are formed at different times with widely different strengths. A statistical method is used to identify what the storms had in common when they produced a tornado-like feature, and what they had in common when one failed to form. This study is important because it highlights which storm features are most influential to tornado formation using an objective method, with results that can be used when observing supercells in the field.
Abstract
This study aims to objectively identify storm-scale characteristics associated with tornado-like vortex (TLV) formation in an ensemble of high-resolution supercell simulations. An ensemble of 51 supercells is created using Cloud Model version 1 (CM1). The first member is initialized using a base state populated by the Rapid Update Cycle (RUC) proximity sounding near El Reno, Oklahoma, on 24 May 2011. The other 50 ensemble members are created by randomly perturbing the base state after a supercell has formed. There is considerable spread between ensemble members, with some supercells producing strong, long-lived TLVs, while others do not produce a TLV at all. The ensemble is analyzed using the ensemble sensitivity analysis (ESA) technique, uncovering storm-scale characteristics that are dynamically relevant to TLV formation. In the rear flank, divergence at the surface southeast of the TLV helps converge and contract existing vertical vorticity, but there is no meaningful sensitivity to rear-flank outflow temperature. In the forward flank, warm temperatures within the cold pool are important to TLV production and magnitude. The longitudinal positioning of strong streamwise vorticity is also a clear indicator of TLV formation and strength, especially within 5 min of when the TLV is measured.
Significance Statement
Tornadoes that form in supercell thunderstorms (long-lived storms with a rotating updraft) are heavily influenced by the features created by the storm itself, such as the temperature of a downdraft. In this study, many different iterations of a strong supercell thunderstorm are simulated, in which tornado-like features are formed at different times with widely different strengths. A statistical method is used to identify what the storms had in common when they produced a tornado-like feature, and what they had in common when one failed to form. This study is important because it highlights which storm features are most influential to tornado formation using an objective method, with results that can be used when observing supercells in the field.
Abstract
Lightning flash observations are closely associated with the development of convective clouds and have a potential for convective-scale data assimilation with high-resolution numerical weather prediction models. A main challenge with the ensemble Kalman filter (EnKF) is that no ensemble members have nonzero lightning flashes in the places where a lightning flash is observed. In this situation, different model states provide all zero lightning, and the EnKF cannot assimilate the nonzero lightning data effectively. This problem is known as the zero-gradient issue. This study addresses the zero-gradient issue by adding regression-based ensemble perturbations derived from a statistical relationship between simulated lightning and atmospheric variables in the whole computational domain. Regression-based ensemble perturbations are applied if the number of ensemble members with nonzero lightning flashes is smaller than a prescribed threshold (N min). Observing system simulation experiments for a heavy precipitation event in Japan show that regression-based ensemble perturbations increase the ensemble spread and successfully induce the analysis increments associated with convection even if only a few members have nonzero lightning flashes. Furthermore, applying regression-based ensemble perturbations improves the forecast accuracy of precipitation although the improvement is sensitive to the choice of N min.
Significance Statement
This study develops an effective method to use lightning flash observations for weather prediction. Lightning flash observations include precious information of the inner structure of clouds, but their effective use for weather prediction is not straightforward since a weather prediction model often misses observed lightning flashes. Our new method uses ensemble-generated statistical relationships to compensate for the misses and successfully improves the forecast accuracy of heavy rains in a simulated case. Our future work will test the method with real observation data.
Abstract
Lightning flash observations are closely associated with the development of convective clouds and have a potential for convective-scale data assimilation with high-resolution numerical weather prediction models. A main challenge with the ensemble Kalman filter (EnKF) is that no ensemble members have nonzero lightning flashes in the places where a lightning flash is observed. In this situation, different model states provide all zero lightning, and the EnKF cannot assimilate the nonzero lightning data effectively. This problem is known as the zero-gradient issue. This study addresses the zero-gradient issue by adding regression-based ensemble perturbations derived from a statistical relationship between simulated lightning and atmospheric variables in the whole computational domain. Regression-based ensemble perturbations are applied if the number of ensemble members with nonzero lightning flashes is smaller than a prescribed threshold (N min). Observing system simulation experiments for a heavy precipitation event in Japan show that regression-based ensemble perturbations increase the ensemble spread and successfully induce the analysis increments associated with convection even if only a few members have nonzero lightning flashes. Furthermore, applying regression-based ensemble perturbations improves the forecast accuracy of precipitation although the improvement is sensitive to the choice of N min.
Significance Statement
This study develops an effective method to use lightning flash observations for weather prediction. Lightning flash observations include precious information of the inner structure of clouds, but their effective use for weather prediction is not straightforward since a weather prediction model often misses observed lightning flashes. Our new method uses ensemble-generated statistical relationships to compensate for the misses and successfully improves the forecast accuracy of heavy rains in a simulated case. Our future work will test the method with real observation data.
Abstract
Tropical transition (TT) is a cyclogenesis process in which a baroclinic disturbance is transformed into a tropical cyclone. Many studies have analyzed TT events over the North Atlantic. This study assesses TT processes from a possible subtropical cyclone to Tropical Storm Kirogi at a relatively high latitude over the western North Pacific in an environment of enhanced baroclinicity in August 2012. Analyses based on satellite observations, the JRA-55 reanalysis, and a simulation with 2.5-km horizontal grid spacing demonstrate three stages during the TT: the baroclinic, intermediate, and convective stages. Over the baroclinic stage, Kirogi had an asymmetric comma-shaped cloud pattern with convection in the northern and eastern parts of the cyclone. This convection is attributed to quasigeostrophic forcing and frontogenesis associated with advection of warm and moist air. Vorticity locally generated by this convection was advected to the cyclone center by cyclone-relative northerly flow. Kirogi also had a shallow warm-core structure due to the interaction with an upper-level cold trough extending from the midlatitudes. In the intermediate stage, the warm and moist air in the lower troposphere and the cold trough in the upper troposphere wrapped around Kirogi. In the convective stage, Kirogi attained characteristics of a typical tropical cyclone with convection concentrated near the cyclone center and a deep warm-core structure. These results demonstrate that baroclinic processes can directly trigger formation of a tropical storm at relatively high latitudes over the western North Pacific in a similar manner to that over the North Atlantic.
Significance Statement
Tropical cyclogenesis is an important process for early identification of tropical cyclone hazards. Tropical transition is a tropical cyclogenesis process that is triggered by a subtropical or extratropical disturbance. It is unique to relatively high latitudes and has social importance particularly for midlatitude countries. There have been fewer studies on tropical transition over the western North Pacific than over the North Atlantic. This study demonstrates the dynamics of a distinct tropical transition event that led to the formation of Tropical Storm Kirogi (2012) at a relatively high latitude over the western North Pacific.
Abstract
Tropical transition (TT) is a cyclogenesis process in which a baroclinic disturbance is transformed into a tropical cyclone. Many studies have analyzed TT events over the North Atlantic. This study assesses TT processes from a possible subtropical cyclone to Tropical Storm Kirogi at a relatively high latitude over the western North Pacific in an environment of enhanced baroclinicity in August 2012. Analyses based on satellite observations, the JRA-55 reanalysis, and a simulation with 2.5-km horizontal grid spacing demonstrate three stages during the TT: the baroclinic, intermediate, and convective stages. Over the baroclinic stage, Kirogi had an asymmetric comma-shaped cloud pattern with convection in the northern and eastern parts of the cyclone. This convection is attributed to quasigeostrophic forcing and frontogenesis associated with advection of warm and moist air. Vorticity locally generated by this convection was advected to the cyclone center by cyclone-relative northerly flow. Kirogi also had a shallow warm-core structure due to the interaction with an upper-level cold trough extending from the midlatitudes. In the intermediate stage, the warm and moist air in the lower troposphere and the cold trough in the upper troposphere wrapped around Kirogi. In the convective stage, Kirogi attained characteristics of a typical tropical cyclone with convection concentrated near the cyclone center and a deep warm-core structure. These results demonstrate that baroclinic processes can directly trigger formation of a tropical storm at relatively high latitudes over the western North Pacific in a similar manner to that over the North Atlantic.
Significance Statement
Tropical cyclogenesis is an important process for early identification of tropical cyclone hazards. Tropical transition is a tropical cyclogenesis process that is triggered by a subtropical or extratropical disturbance. It is unique to relatively high latitudes and has social importance particularly for midlatitude countries. There have been fewer studies on tropical transition over the western North Pacific than over the North Atlantic. This study demonstrates the dynamics of a distinct tropical transition event that led to the formation of Tropical Storm Kirogi (2012) at a relatively high latitude over the western North Pacific.
Abstract
This study presents observational findings of air–sea turbulent heat flux anomalies during the onset of the South China Sea summer monsoon (SCSSM) in 2021 and explains the mechanism for high-resolution heat flux variations. Turbulent heat flux discrepancies are not uniform throughout the basin but indicate a significant regional disparity in the South China Sea (SCS), which also experiences evident year-to-year variability. Based on buoy- and cruise-based air–sea measurements, high-temporal-resolution (less than hourly) anomalies in the latent heat flux during the SCSSM burst are unexpectedly determined by sea–air humidity differences instead of wind effects under near-neutral and mixed marine atmospheric boundary layer (MABL) stability conditions. However, latent heat anomalies are mainly induced by wind speed under changing MABL conditions. The sensible heat flux is much weaker, with its anomalies dominated by sea–air temperature differences regardless of the boundary layer condition. The observational results are used to examine the discrepancies in turbulent heat fluxes and associated air–sea variables in reanalysis products. The comparisons indicate that latent and sensible heat fluxes in the reanalysis are overestimated by approximately 55 and 3 W m−2, respectively. These overestimations are mainly induced by higher estimates of sea–air humidity/temperature differences. The relative humidity is underestimated by approximately 4.2% in the two high-resolution reanalysis products. The higher SST (near-surface specific humidity) and lower air temperature (specific air humidity) eventually lead to higher estimates of sea–air humidity/temperature differences (1.75 g kg−1/0.25°C), which are the dominant factors controlling the variations in the air–sea turbulent heat fluxes.
Significance Statement
Air–sea interactions are significant in predicting the onset of East Asian monsoon systems, including the SCSSM. During the SCSSM in 2021, four buoys and cruise observations are used to investigate anomalies in the latent and sensible heat fluxes. The physical mechanism of the variations in turbulent heat fluxes under different MABL stability conditions is explored in this study. The humidity and wind speed anomalies play roles under mixed boundary conditions in determining the high-resolution variations in latent heat fluxes. Based on these observational results, the heat fluxes and associated air–sea variables from reanalysis products are compared to identify the differences in the operational systems. These comparison results can help improve the reanalysis to obtain better monsoon predictions.
Abstract
This study presents observational findings of air–sea turbulent heat flux anomalies during the onset of the South China Sea summer monsoon (SCSSM) in 2021 and explains the mechanism for high-resolution heat flux variations. Turbulent heat flux discrepancies are not uniform throughout the basin but indicate a significant regional disparity in the South China Sea (SCS), which also experiences evident year-to-year variability. Based on buoy- and cruise-based air–sea measurements, high-temporal-resolution (less than hourly) anomalies in the latent heat flux during the SCSSM burst are unexpectedly determined by sea–air humidity differences instead of wind effects under near-neutral and mixed marine atmospheric boundary layer (MABL) stability conditions. However, latent heat anomalies are mainly induced by wind speed under changing MABL conditions. The sensible heat flux is much weaker, with its anomalies dominated by sea–air temperature differences regardless of the boundary layer condition. The observational results are used to examine the discrepancies in turbulent heat fluxes and associated air–sea variables in reanalysis products. The comparisons indicate that latent and sensible heat fluxes in the reanalysis are overestimated by approximately 55 and 3 W m−2, respectively. These overestimations are mainly induced by higher estimates of sea–air humidity/temperature differences. The relative humidity is underestimated by approximately 4.2% in the two high-resolution reanalysis products. The higher SST (near-surface specific humidity) and lower air temperature (specific air humidity) eventually lead to higher estimates of sea–air humidity/temperature differences (1.75 g kg−1/0.25°C), which are the dominant factors controlling the variations in the air–sea turbulent heat fluxes.
Significance Statement
Air–sea interactions are significant in predicting the onset of East Asian monsoon systems, including the SCSSM. During the SCSSM in 2021, four buoys and cruise observations are used to investigate anomalies in the latent and sensible heat fluxes. The physical mechanism of the variations in turbulent heat fluxes under different MABL stability conditions is explored in this study. The humidity and wind speed anomalies play roles under mixed boundary conditions in determining the high-resolution variations in latent heat fluxes. Based on these observational results, the heat fluxes and associated air–sea variables from reanalysis products are compared to identify the differences in the operational systems. These comparison results can help improve the reanalysis to obtain better monsoon predictions.
Abstract
To simulate the large-scale impacts of wind farms, wind turbines are parameterized within mesoscale models in which grid sizes are typically much larger than turbine scales. Five wind-farm parameterizations were implemented in the Weather Research and Forecasting (WRF) Model v4.3.3 to simulate multiple operational wind farms in the North Sea, which were verified against a satellite image, airborne measurements, and the FINO-1 meteorological mast data on 14 October 2017. The parameterization by Volker et al. underestimated the turbulence and wind speed deficit compared to measurements and to the parameterization of Fitch et al., which is the default in WRF. The Abkar and Porté-Agel parameterization gave close predictions of wind speed to that of Fitch et al. with a lower magnitude of predicted turbulence, although the parameterization was sensitive to a tunable constant. The parameterization by Pan and Archer resulted in turbine-induced thrust and turbulence that were slightly less than that of Fitch et al., but resulted in a substantial drop in power generation due to the magnification of wind speed differences in the power calculation. The parameterization by Redfern et al. was not substantially different from Fitch et al. in the absence of conditions such as strong wind veer. The simulations indicated the need for a turbine-induced turbulence source within a wind-farm parameterization for improved prediction of near-surface wind speed, near-surface temperature, and turbulence. The induced turbulence was responsible for enhancing turbulent momentum flux near the surface, causing a local speed-up of near-surface wind speed inside a wind farm. Our findings highlighted that wakes from large offshore wind farms could extend 100 km downwind, reducing downwind power production as in the case of the 400-MW Bard Offshore 1 wind farm whose power output was reduced by the wakes of the 402-MW Veja Mate wind farm for this case study.
Significance Statement
Because wind farms are smaller than the common grid spacing of numerical weather prediction models, the impacts of wind farms on the weather have to be indirectly incorporated through parameterizations. Several approaches to parameterization are available and the most appropriate scheme is not always clear. The absence of a turbulence source in a parameterization leads to substantial inaccuracies in predicting near-surface wind speed and turbulence over a wind farm. The impact of large clusters of offshore wind turbines in the wind field can exceed 100 km downwind, resulting in a substantial loss of power for downwind turbines. The prediction of this power loss can be sensitive to the chosen parameterization, contributing to uncertainty in wind-farm economic planning.
Abstract
To simulate the large-scale impacts of wind farms, wind turbines are parameterized within mesoscale models in which grid sizes are typically much larger than turbine scales. Five wind-farm parameterizations were implemented in the Weather Research and Forecasting (WRF) Model v4.3.3 to simulate multiple operational wind farms in the North Sea, which were verified against a satellite image, airborne measurements, and the FINO-1 meteorological mast data on 14 October 2017. The parameterization by Volker et al. underestimated the turbulence and wind speed deficit compared to measurements and to the parameterization of Fitch et al., which is the default in WRF. The Abkar and Porté-Agel parameterization gave close predictions of wind speed to that of Fitch et al. with a lower magnitude of predicted turbulence, although the parameterization was sensitive to a tunable constant. The parameterization by Pan and Archer resulted in turbine-induced thrust and turbulence that were slightly less than that of Fitch et al., but resulted in a substantial drop in power generation due to the magnification of wind speed differences in the power calculation. The parameterization by Redfern et al. was not substantially different from Fitch et al. in the absence of conditions such as strong wind veer. The simulations indicated the need for a turbine-induced turbulence source within a wind-farm parameterization for improved prediction of near-surface wind speed, near-surface temperature, and turbulence. The induced turbulence was responsible for enhancing turbulent momentum flux near the surface, causing a local speed-up of near-surface wind speed inside a wind farm. Our findings highlighted that wakes from large offshore wind farms could extend 100 km downwind, reducing downwind power production as in the case of the 400-MW Bard Offshore 1 wind farm whose power output was reduced by the wakes of the 402-MW Veja Mate wind farm for this case study.
Significance Statement
Because wind farms are smaller than the common grid spacing of numerical weather prediction models, the impacts of wind farms on the weather have to be indirectly incorporated through parameterizations. Several approaches to parameterization are available and the most appropriate scheme is not always clear. The absence of a turbulence source in a parameterization leads to substantial inaccuracies in predicting near-surface wind speed and turbulence over a wind farm. The impact of large clusters of offshore wind turbines in the wind field can exceed 100 km downwind, resulting in a substantial loss of power for downwind turbines. The prediction of this power loss can be sensitive to the chosen parameterization, contributing to uncertainty in wind-farm economic planning.
Abstract
The development and intensification of low-level mesocyclones in supercell thunderstorms have often been attributed, at least in part, to augmented streamwise vorticity generated baroclinically in the forward flank of supercells. However, the ambient streamwise vorticity of the environment (often quantified via storm-relative helicity), especially near the ground, is particularly skillful at discriminating between nontornadic and tornadic supercells. This study investigates whether the origins of the inflow air into supercell low-level mesocyclones, both horizontally and vertically, can help explain the dynamical role of environmental versus storm-generated vorticity in the development of low-level mesocyclone rotation. Simulations of supercells, initialized with wind profiles common to supercell environments observed in nature, show that the air bound for the low-level mesocyclone primarily originates from the ambient environment (rather than from along the forward flank) and from very close to the ground, often in the lowest 200–400 m of the atmosphere. Given that the near-ground environmental air comprises the bulk of the inflow into low-level mesocyclones, this likely explains the forecast skill of environmental streamwise vorticity in the lowest few hundred meters of the atmosphere. The low-level mesocyclone does not appear to require much augmentation from the development of additional horizontal vorticity in the forward flank. Instead, the dominant contributor to vertical vorticity within the low-level mesocyclone is from the environmental horizontal vorticity. This study provides further context to the ongoing discussion regarding the development of rotation within supercell low-level mesocyclones.
Significance Statement
Supercell thunderstorms produce the majority of tornadoes, and a defining characteristic of supercells is their rotating updraft, known as the “mesocyclone.” When the mesocyclone is stronger at lower altitudes, the likelihood of tornadoes increases. The purpose of this study is to understand if the rotation of the mesocyclone in supercells is due to horizontal spin present in the ambient environment or whether additional horizontal spin generated by the storm itself primarily drives this rotation. Our results suggest that inflow air into supercells and low-level mesocyclone rotation are mainly due to the properties of the environmental inflow air, especially near the ground. This hopefully provides further context to how our community views the development of low-level mesocyclones in supercells.
Abstract
The development and intensification of low-level mesocyclones in supercell thunderstorms have often been attributed, at least in part, to augmented streamwise vorticity generated baroclinically in the forward flank of supercells. However, the ambient streamwise vorticity of the environment (often quantified via storm-relative helicity), especially near the ground, is particularly skillful at discriminating between nontornadic and tornadic supercells. This study investigates whether the origins of the inflow air into supercell low-level mesocyclones, both horizontally and vertically, can help explain the dynamical role of environmental versus storm-generated vorticity in the development of low-level mesocyclone rotation. Simulations of supercells, initialized with wind profiles common to supercell environments observed in nature, show that the air bound for the low-level mesocyclone primarily originates from the ambient environment (rather than from along the forward flank) and from very close to the ground, often in the lowest 200–400 m of the atmosphere. Given that the near-ground environmental air comprises the bulk of the inflow into low-level mesocyclones, this likely explains the forecast skill of environmental streamwise vorticity in the lowest few hundred meters of the atmosphere. The low-level mesocyclone does not appear to require much augmentation from the development of additional horizontal vorticity in the forward flank. Instead, the dominant contributor to vertical vorticity within the low-level mesocyclone is from the environmental horizontal vorticity. This study provides further context to the ongoing discussion regarding the development of rotation within supercell low-level mesocyclones.
Significance Statement
Supercell thunderstorms produce the majority of tornadoes, and a defining characteristic of supercells is their rotating updraft, known as the “mesocyclone.” When the mesocyclone is stronger at lower altitudes, the likelihood of tornadoes increases. The purpose of this study is to understand if the rotation of the mesocyclone in supercells is due to horizontal spin present in the ambient environment or whether additional horizontal spin generated by the storm itself primarily drives this rotation. Our results suggest that inflow air into supercells and low-level mesocyclone rotation are mainly due to the properties of the environmental inflow air, especially near the ground. This hopefully provides further context to how our community views the development of low-level mesocyclones in supercells.
