Search Results
You are looking at 11 - 19 of 19 items for :
- Author or Editor: Matthew Lebsock x
- Article x
- Refine by Access: All Content x
Abstract
A revised version of the CloudSat–MODIS cloud liquid water retrieval algorithm is presented. The new algorithm, which combines measurements of radar reflectivity and cloud optical depth, addresses issues discovered in the current CloudSat–MODIS cloud water content (CWC) product. This current product is shown to be underconstrained by observations and to be too dependent on prior information incorporated into the Bayesian optimal-estimation algorithm. The most significant change made to the algorithm in this study was decreasing the number of independent variables to allow the observations to constrain the retrieved values better. The retrieval was also reformulated for improved compliance with the mathematical assumptions of the optimal-estimation algorithm. To validate the accuracy of the revised algorithm, the path-integrated attenuation (PIA) of the CloudSat radar signal was computed from the algorithm results. These modeled values were compared with independent measurements of the PIA that were obtained using a surface reference technique. This comparison shows that the cloud liquid water retrieved by the algorithm is close to being unbiased. The revised algorithm was also found to be an improvement over the current CloudSat CWC product and, to a lesser degree, the MODIS-derived cloud liquid water path.
Abstract
A revised version of the CloudSat–MODIS cloud liquid water retrieval algorithm is presented. The new algorithm, which combines measurements of radar reflectivity and cloud optical depth, addresses issues discovered in the current CloudSat–MODIS cloud water content (CWC) product. This current product is shown to be underconstrained by observations and to be too dependent on prior information incorporated into the Bayesian optimal-estimation algorithm. The most significant change made to the algorithm in this study was decreasing the number of independent variables to allow the observations to constrain the retrieved values better. The retrieval was also reformulated for improved compliance with the mathematical assumptions of the optimal-estimation algorithm. To validate the accuracy of the revised algorithm, the path-integrated attenuation (PIA) of the CloudSat radar signal was computed from the algorithm results. These modeled values were compared with independent measurements of the PIA that were obtained using a surface reference technique. This comparison shows that the cloud liquid water retrieved by the algorithm is close to being unbiased. The revised algorithm was also found to be an improvement over the current CloudSat CWC product and, to a lesser degree, the MODIS-derived cloud liquid water path.
Abstract
Satellite observations are used to deduce the relationship between cloud water and precipitation water for low-latitude shallow marine clouds. The specific sensors that facilitate the analysis are the collocated CloudSat profiling radar and the Moderate Resolution Imaging Spectroradiometer (MODIS). The separation of the cloud water and precipitation water signals relies on the relative insensitivity of MODIS to the presence of precipitation water in conjunction with estimates of the path-integrated attenuation of the CloudSat radar beam while explicitly accounting for the effect of precipitation water on the observed MODIS optical depth. Variations in the precipitation water path are shown to be associated with both the cloud water path and the cloud effective radius, suggesting both macrophysical and microphysical controls on the production of precipitation water. The method outlined here is used to place broad bounds on the mean relationship between the precipitation water path and the cloud water path in shallow marine clouds, given certain clearly stated assumptions. The ratio of precipitation water to cloud water is shown to increase from zero at low cloud water path values to roughly 0.5 at 500 g m−2 of cloud water. The retrieval results further show that the median influence of precipitation on the observed optical depth increases monotonically with optical depth varying between 1% and 5% at 500 g m−2 of cloud water with the source of the uncertainty deriving from the assumption of the nature of the precipitation drop size distribution.
Abstract
Satellite observations are used to deduce the relationship between cloud water and precipitation water for low-latitude shallow marine clouds. The specific sensors that facilitate the analysis are the collocated CloudSat profiling radar and the Moderate Resolution Imaging Spectroradiometer (MODIS). The separation of the cloud water and precipitation water signals relies on the relative insensitivity of MODIS to the presence of precipitation water in conjunction with estimates of the path-integrated attenuation of the CloudSat radar beam while explicitly accounting for the effect of precipitation water on the observed MODIS optical depth. Variations in the precipitation water path are shown to be associated with both the cloud water path and the cloud effective radius, suggesting both macrophysical and microphysical controls on the production of precipitation water. The method outlined here is used to place broad bounds on the mean relationship between the precipitation water path and the cloud water path in shallow marine clouds, given certain clearly stated assumptions. The ratio of precipitation water to cloud water is shown to increase from zero at low cloud water path values to roughly 0.5 at 500 g m−2 of cloud water. The retrieval results further show that the median influence of precipitation on the observed optical depth increases monotonically with optical depth varying between 1% and 5% at 500 g m−2 of cloud water with the source of the uncertainty deriving from the assumption of the nature of the precipitation drop size distribution.
Abstract
An algorithm that derives the nonprecipitating cloud liquid water path W cld from CloudSat using a surface reference technique (SRT) is presented. The uncertainty characteristics of the SRT are evaluated. It is demonstrated that an accurate analytical formulation for the pixel-scale precision can be derived. The average precision of the SRT is estimated to be 34 g m−2 at the individual pixel scale; however, precision systematically decreases from around 30 to 40 g m−2 as cloud fraction varies from 0% to 100%. The retrievals of clear-sky W cld have a mean bias of 0.9 g m−2. Output from a large-eddy simulation coupled to a radar simulator shows that an additional bias of −8% may result from nonuniformity within the footprint of cloudy pixels. The retrieval yield for the SRT, measured relative to all warm clouds over ocean between 60°N and 60°S latitude is 43%. The SRT W cld is compared with one estimate of W cld from the Moderate Resolution Imaging Spectroradiometer (MODIS) using an adiabatic cloud profile and an effective radius derived from 3.7-μm reflectance. A strong correlation between the mean MODIS W cld and SRT W cld is found across diverse cloud regimes, but with biases in the mean W cld that are cloud-regime dependent. Overall, the mean bias of the SRT relative to MODIS is −13.1 g m−2. Systematic underestimates of W cld by the SRT resulting from nonuniform beamfilling cannot be ruled out as an explanation for the retrieval bias.
Abstract
An algorithm that derives the nonprecipitating cloud liquid water path W cld from CloudSat using a surface reference technique (SRT) is presented. The uncertainty characteristics of the SRT are evaluated. It is demonstrated that an accurate analytical formulation for the pixel-scale precision can be derived. The average precision of the SRT is estimated to be 34 g m−2 at the individual pixel scale; however, precision systematically decreases from around 30 to 40 g m−2 as cloud fraction varies from 0% to 100%. The retrievals of clear-sky W cld have a mean bias of 0.9 g m−2. Output from a large-eddy simulation coupled to a radar simulator shows that an additional bias of −8% may result from nonuniformity within the footprint of cloudy pixels. The retrieval yield for the SRT, measured relative to all warm clouds over ocean between 60°N and 60°S latitude is 43%. The SRT W cld is compared with one estimate of W cld from the Moderate Resolution Imaging Spectroradiometer (MODIS) using an adiabatic cloud profile and an effective radius derived from 3.7-μm reflectance. A strong correlation between the mean MODIS W cld and SRT W cld is found across diverse cloud regimes, but with biases in the mean W cld that are cloud-regime dependent. Overall, the mean bias of the SRT relative to MODIS is −13.1 g m−2. Systematic underestimates of W cld by the SRT resulting from nonuniform beamfilling cannot be ruled out as an explanation for the retrieval bias.
Abstract
This paper is the first attempt to document a simple convection-tracking method based on the IMERG precipitation product to generate an IMERG-based Convection Tracking (IMERG-CT) dataset. Up to now, precipitation datasets have been Eulerian accumulations. Now with IMERG-CT, we can estimate total rainfall based on Lagrangian accumulations, which is a very important step in diagnosing cloud-precipitation process following the evolution of air masses. Convection-tracking algorithms have traditionally been developed on the basis of brightness temperature (Tb) from satellite infrared (IR) retrievals. However, vigorous rainfall can be produced by warm-topped systems in a moist environment; this situation cannot be captured by traditional IR-based tracking but is observed in IMERG-CT. Therefore, an advantage of IMERG-CT is its ability to include the previously missing information of shallow clouds that grow into convective storms, which provides us more-complete life cycle records of convective storms than traditional IR-based tracking does. This study also demonstrates the utility of IMERG-CT through investigating various properties of convective systems in terms of the evolution before and after peak precipitation rate and amount. For example, composite analysis reveals a link between evolution of precipitation and convective development: the signature of stratiform anvils remaining after the storm has produced the maximum rainfall, as average Tb stays almost constant for 5 h after the peak of precipitation. Our study highlights the importance of joint analysis of cloud and precipitation data in time sequence, which helps to elucidate the underlying dynamic processes producing tropical rainfall and its resultant effects on the atmospheric thermodynamics.
Abstract
This paper is the first attempt to document a simple convection-tracking method based on the IMERG precipitation product to generate an IMERG-based Convection Tracking (IMERG-CT) dataset. Up to now, precipitation datasets have been Eulerian accumulations. Now with IMERG-CT, we can estimate total rainfall based on Lagrangian accumulations, which is a very important step in diagnosing cloud-precipitation process following the evolution of air masses. Convection-tracking algorithms have traditionally been developed on the basis of brightness temperature (Tb) from satellite infrared (IR) retrievals. However, vigorous rainfall can be produced by warm-topped systems in a moist environment; this situation cannot be captured by traditional IR-based tracking but is observed in IMERG-CT. Therefore, an advantage of IMERG-CT is its ability to include the previously missing information of shallow clouds that grow into convective storms, which provides us more-complete life cycle records of convective storms than traditional IR-based tracking does. This study also demonstrates the utility of IMERG-CT through investigating various properties of convective systems in terms of the evolution before and after peak precipitation rate and amount. For example, composite analysis reveals a link between evolution of precipitation and convective development: the signature of stratiform anvils remaining after the storm has produced the maximum rainfall, as average Tb stays almost constant for 5 h after the peak of precipitation. Our study highlights the importance of joint analysis of cloud and precipitation data in time sequence, which helps to elucidate the underlying dynamic processes producing tropical rainfall and its resultant effects on the atmospheric thermodynamics.
Abstract
While GCM horizontal resolution has received the majority of scale improvements in recent years, ample evidence suggests that a model’s vertical resolution exerts a strong control on its ability to accurately simulate the physics of the marine boundary layer. Here we show that, regardless of parameter tuning, the ability of a single-column model (SCM) to simulate the subtropical marine boundary layer improves when its vertical resolution is improved. We introduce a novel objective tuning technique to optimize the parameters of an SCM against profiles of temperature and moisture and their turbulent fluxes, horizontal winds, cloud water, and rainwater from large-eddy simulations (LES). We use this method to identify optimal parameters for simulating marine stratocumulus and shallow cumulus. The novel tuning method utilizes an objective performance metric that accounts for the uncertainty in the LES output, including the covariability between model variables. Optimization is performed independently for different vertical grid spacings and value of time step, ranging from coarse scales often used in current global models (120 m, 180 s) to fine scales often used in parameterization development and large-eddy simulations (10 m, 15 s). Uncertainty-weighted disagreement between the SCM and LES decreases by a factor of ∼5 when vertical grid spacing is improved from 120 to 10 m, with time step reductions being of secondary importance. Model performance is shown to converge at a vertical grid spacing of 20 m, with further refinements to 10 m leading to little further improvement.
Significance Statement
In successive generations of computer models that simulate Earth’s atmosphere, improvements have been mainly accomplished by reducing the horizontal sizes of discretized grid boxes, while the vertical grid spacing has seen comparatively lesser refinements. Here we advocate for additional attention to be paid to the number of vertical layers in these models, especially in the model layers closest to Earth’s surface where climatologically important marine stratocumulus and shallow cumulus clouds reside. Our experiments show that the ability of a one-dimensional model to represent physical processes important to these clouds is strongly dependent on the model’s vertical grid spacing.
Abstract
While GCM horizontal resolution has received the majority of scale improvements in recent years, ample evidence suggests that a model’s vertical resolution exerts a strong control on its ability to accurately simulate the physics of the marine boundary layer. Here we show that, regardless of parameter tuning, the ability of a single-column model (SCM) to simulate the subtropical marine boundary layer improves when its vertical resolution is improved. We introduce a novel objective tuning technique to optimize the parameters of an SCM against profiles of temperature and moisture and their turbulent fluxes, horizontal winds, cloud water, and rainwater from large-eddy simulations (LES). We use this method to identify optimal parameters for simulating marine stratocumulus and shallow cumulus. The novel tuning method utilizes an objective performance metric that accounts for the uncertainty in the LES output, including the covariability between model variables. Optimization is performed independently for different vertical grid spacings and value of time step, ranging from coarse scales often used in current global models (120 m, 180 s) to fine scales often used in parameterization development and large-eddy simulations (10 m, 15 s). Uncertainty-weighted disagreement between the SCM and LES decreases by a factor of ∼5 when vertical grid spacing is improved from 120 to 10 m, with time step reductions being of secondary importance. Model performance is shown to converge at a vertical grid spacing of 20 m, with further refinements to 10 m leading to little further improvement.
Significance Statement
In successive generations of computer models that simulate Earth’s atmosphere, improvements have been mainly accomplished by reducing the horizontal sizes of discretized grid boxes, while the vertical grid spacing has seen comparatively lesser refinements. Here we advocate for additional attention to be paid to the number of vertical layers in these models, especially in the model layers closest to Earth’s surface where climatologically important marine stratocumulus and shallow cumulus clouds reside. Our experiments show that the ability of a one-dimensional model to represent physical processes important to these clouds is strongly dependent on the model’s vertical grid spacing.
Abstract
This study contributes to the estimation of the global mean and zonal distribution of oceanic precipitation rate using complementary information from advanced precipitation measuring sensors and provides an independent reference to assess current precipitation products. Precipitation estimates from the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and CloudSat cloud profiling radar (CPR) were merged, as the two complementary sensors yield an unprecedented range of sensitivity to quantify rainfall from drizzle through the most intense rates. At higher latitudes, where TRMM PR does not exist, precipitation estimates from Aqua’s Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) complemented CloudSat CPR to capture intense precipitation rates. The high sensitivity of CPR allows estimation of snow rate, an important type of precipitation at high latitudes, not directly observed in current merged precipitation products. Using the merged precipitation estimate from the CloudSat, TRMM, and Aqua platforms (this estimate is abbreviated to MCTA), the authors’ estimate for 3-yr (2007–09) near-global (80°S–80°N) oceanic mean precipitation rate is ~2.94 mm day−1. This new estimate of mean global ocean precipitation is about 9% higher than that of the corresponding Climate Prediction Center (CPC) Merged Analysis of Precipitation (CMAP) value (2.68 mm day−1) and about 4% higher than that of the Global Precipitation Climatology Project (GPCP; 2.82 mm day−1). Furthermore, MCTA suggests distinct differences in the zonal distribution of precipitation rate from that depicted in GPCP and CMAP, especially in the Southern Hemisphere.
Abstract
This study contributes to the estimation of the global mean and zonal distribution of oceanic precipitation rate using complementary information from advanced precipitation measuring sensors and provides an independent reference to assess current precipitation products. Precipitation estimates from the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and CloudSat cloud profiling radar (CPR) were merged, as the two complementary sensors yield an unprecedented range of sensitivity to quantify rainfall from drizzle through the most intense rates. At higher latitudes, where TRMM PR does not exist, precipitation estimates from Aqua’s Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) complemented CloudSat CPR to capture intense precipitation rates. The high sensitivity of CPR allows estimation of snow rate, an important type of precipitation at high latitudes, not directly observed in current merged precipitation products. Using the merged precipitation estimate from the CloudSat, TRMM, and Aqua platforms (this estimate is abbreviated to MCTA), the authors’ estimate for 3-yr (2007–09) near-global (80°S–80°N) oceanic mean precipitation rate is ~2.94 mm day−1. This new estimate of mean global ocean precipitation is about 9% higher than that of the corresponding Climate Prediction Center (CPC) Merged Analysis of Precipitation (CMAP) value (2.68 mm day−1) and about 4% higher than that of the Global Precipitation Climatology Project (GPCP; 2.82 mm day−1). Furthermore, MCTA suggests distinct differences in the zonal distribution of precipitation rate from that depicted in GPCP and CMAP, especially in the Southern Hemisphere.
Abstract
Daily gridded cloud data from MODIS and ERA-Interim reanalysis have been assessed to examine variations of low cloud fraction (CF) and cloud-top height and their dependence on large-scale dynamics and a measure of stability. To assess the stratocumulus (Sc) to cumulus (Cu) transition (STCT), the observations are used to evaluate two versions of the NCAR Community Atmosphere Model version 5 (CAM5), both the base model and a version that has implemented a new subgrid low cloud parameterization, Cloud Layers Unified by Binormals (CLUBB).
The ratio of moist static energy (MSE) at 700–1000 hPa (MSEtotal) is a skillful predictor of median CF of screened low cloud grids. Values of MSEtotal less than 1.00 represent either conditionally or absolutely unstable layers, and probability density functions of CF suggest a preponderance of either trade Cu (median CF < 0.4) or transitional Sc clouds (0.4 < CF < 0.9). With increased stability (MSEtotal > 1.00), an abundance of overcast or nearly overcast low clouds exists. While both MODIS and ERA-Interim indicate a fairly smooth transition between the low cloud regimes, CAM5-Base simulates an abrupt shift from trade Cu to Sc, with trade Cu covering both too much area and occurring over excessively strong stabilities. In contrast, CAM-CLUBB simulates a smoother trade Cu to Sc transition (CTST) as a function of MSEtotal, albeit with too extensive coverage of overcast Sc in the primary northeastern Pacific subsidence region. While the overall CF distribution in CAM-CLUBB is more realistic, too few transitional clouds are simulated for intermediate MSEtotal compared to observations.
Abstract
Daily gridded cloud data from MODIS and ERA-Interim reanalysis have been assessed to examine variations of low cloud fraction (CF) and cloud-top height and their dependence on large-scale dynamics and a measure of stability. To assess the stratocumulus (Sc) to cumulus (Cu) transition (STCT), the observations are used to evaluate two versions of the NCAR Community Atmosphere Model version 5 (CAM5), both the base model and a version that has implemented a new subgrid low cloud parameterization, Cloud Layers Unified by Binormals (CLUBB).
The ratio of moist static energy (MSE) at 700–1000 hPa (MSEtotal) is a skillful predictor of median CF of screened low cloud grids. Values of MSEtotal less than 1.00 represent either conditionally or absolutely unstable layers, and probability density functions of CF suggest a preponderance of either trade Cu (median CF < 0.4) or transitional Sc clouds (0.4 < CF < 0.9). With increased stability (MSEtotal > 1.00), an abundance of overcast or nearly overcast low clouds exists. While both MODIS and ERA-Interim indicate a fairly smooth transition between the low cloud regimes, CAM5-Base simulates an abrupt shift from trade Cu to Sc, with trade Cu covering both too much area and occurring over excessively strong stabilities. In contrast, CAM-CLUBB simulates a smoother trade Cu to Sc transition (CTST) as a function of MSEtotal, albeit with too extensive coverage of overcast Sc in the primary northeastern Pacific subsidence region. While the overall CF distribution in CAM-CLUBB is more realistic, too few transitional clouds are simulated for intermediate MSEtotal compared to observations.
Abstract
One of the most successful demonstrations of an integrated approach to observe Earth from multiple perspectives is the A-Train satellite constellation. The science enabled by this constellation flourished with the introduction of the two active sensors carried by the National Aeronautics and Space Administration (NASA) CloudSat and the NASA–Centre National d’Études Spatiales (CNES) Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellites that were launched together on 28 April 2006. These two missions have provided a 10-yr demonstration of coordinated formation flying that made it possible to develop integrated products and that offered new insights into key atmospheric processes. The progress achieved over this decade of observations, summarized in this paper, clearly demonstrate the fundamental importance of the vertical structure of clouds and aerosol for understanding the influences of the larger-scale atmospheric circulation on aerosol, the hydrological cycle, the cloud-scale physics, and the formation of the major storm systems of Earth. The research also underscored inherent ambiguities in radiance data in describing cloud properties and how these active systems have greatly enhanced passive observation. It is now clear that monitoring the vertical structure of clouds and aerosol is essential, and a climate data record is now being constructed. These pioneering efforts are to be continued with the Earth Clouds, Aerosol and Radiation Explorer (EarthCARE) mission planned for launch in 2019.
Abstract
One of the most successful demonstrations of an integrated approach to observe Earth from multiple perspectives is the A-Train satellite constellation. The science enabled by this constellation flourished with the introduction of the two active sensors carried by the National Aeronautics and Space Administration (NASA) CloudSat and the NASA–Centre National d’Études Spatiales (CNES) Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellites that were launched together on 28 April 2006. These two missions have provided a 10-yr demonstration of coordinated formation flying that made it possible to develop integrated products and that offered new insights into key atmospheric processes. The progress achieved over this decade of observations, summarized in this paper, clearly demonstrate the fundamental importance of the vertical structure of clouds and aerosol for understanding the influences of the larger-scale atmospheric circulation on aerosol, the hydrological cycle, the cloud-scale physics, and the formation of the major storm systems of Earth. The research also underscored inherent ambiguities in radiance data in describing cloud properties and how these active systems have greatly enhanced passive observation. It is now clear that monitoring the vertical structure of clouds and aerosol is essential, and a climate data record is now being constructed. These pioneering efforts are to be continued with the Earth Clouds, Aerosol and Radiation Explorer (EarthCARE) mission planned for launch in 2019.
Abstract
The Multisensor Advanced Climatology of Liquid Water Path (MAC-LWP), an updated and enhanced version of the University of Wisconsin (UWisc) cloud liquid water path (CLWP) climatology, currently provides 29 years (1988–2016) of monthly gridded (1°) oceanic CLWP information constructed using Remote Sensing Systems (RSS) intercalibrated 0.25°-resolution retrievals. Satellite sources include SSM/I, TMI, AMSR-E, WindSat, SSMIS, AMSR-2, and GMI. To mitigate spurious CLWP trends, the climatology is corrected for drifting satellite overpass times by simultaneously solving for the monthly average CLWP and the monthly mean diurnal cycle. In addition to a longer record and six additional satellite products, major enhancements relative to the UWisc climatology include updating the input to version 7 RSS retrievals, correcting for a CLWP bias (based on matchups to clear-sky MODIS scenes), and constructing a total (cloud + rain) liquid water path (TLWP) record for use in analyses of columnar liquid water in raining clouds. Because the microwave emission signal from cloud water is similar to that of precipitation-sized hydrometeors, greater uncertainty in the CLWP record is expected in regions of substantial precipitation. Therefore, the TLWP field can also be used as a quality-control screen, where uncertainty increases as the ratio of CLWP to TLWP decreases. For regions where confidence in CLWP is highest (i.e., CLWP:TLWP > 0.8), systematic differences in MAC CLWP relative to UWisc CLWP range from −15% (e.g., global oceanic stratocumulus decks) to +5%–10% (e.g., portions of the higher latitudes, storm tracks, and shallower convection regions straddling the ITCZ). The dataset is currently hosted at the Goddard Earth Sciences Data and Information Services Center.
Abstract
The Multisensor Advanced Climatology of Liquid Water Path (MAC-LWP), an updated and enhanced version of the University of Wisconsin (UWisc) cloud liquid water path (CLWP) climatology, currently provides 29 years (1988–2016) of monthly gridded (1°) oceanic CLWP information constructed using Remote Sensing Systems (RSS) intercalibrated 0.25°-resolution retrievals. Satellite sources include SSM/I, TMI, AMSR-E, WindSat, SSMIS, AMSR-2, and GMI. To mitigate spurious CLWP trends, the climatology is corrected for drifting satellite overpass times by simultaneously solving for the monthly average CLWP and the monthly mean diurnal cycle. In addition to a longer record and six additional satellite products, major enhancements relative to the UWisc climatology include updating the input to version 7 RSS retrievals, correcting for a CLWP bias (based on matchups to clear-sky MODIS scenes), and constructing a total (cloud + rain) liquid water path (TLWP) record for use in analyses of columnar liquid water in raining clouds. Because the microwave emission signal from cloud water is similar to that of precipitation-sized hydrometeors, greater uncertainty in the CLWP record is expected in regions of substantial precipitation. Therefore, the TLWP field can also be used as a quality-control screen, where uncertainty increases as the ratio of CLWP to TLWP decreases. For regions where confidence in CLWP is highest (i.e., CLWP:TLWP > 0.8), systematic differences in MAC CLWP relative to UWisc CLWP range from −15% (e.g., global oceanic stratocumulus decks) to +5%–10% (e.g., portions of the higher latitudes, storm tracks, and shallower convection regions straddling the ITCZ). The dataset is currently hosted at the Goddard Earth Sciences Data and Information Services Center.
