Search Results
You are looking at 1 - 4 of 4 items for :
- Author or Editor: John McGregor x
- Bulletin of the American Meteorological Society x
- Refine by Access: All Content x
Improving the simulation of regional climate change is one of the high-priority areas of climate study because regional information is needed for climate change impact assessments. Such information is especially important for the region covered by the East Asian monsoon where there is high variability in both space and time. To this end, the Regional Climate Model Intercomparison Project (RMIP) for Asia has been established to evaluate and improve regional climate model (RCM) simulations of the monsoon climate. RMIP operates under joint support of the Asia–Pacific Network for Global Change Research (APN), the Global Change System for Analysis, Research and Training (START), the Chinese Academy of Sciences, and several projects of participating nations. The project currently involves 10 research groups from Australia, China, Japan, South Korea, and the United States, as well as scientists from India, Italy, Mongolia, North Korea, and Russia.
RMIP has three simulation phases: March 1997–August 1998, which covers a full annual cycle and extremes in monsoon behavior; January 1989–December 1998, which examines simulated climatology; and a regional climate change scenario, involving nesting with a global model. This paper is a brief report of RMIP goals, implementation design, and some initial results from the first phase studies.
Improving the simulation of regional climate change is one of the high-priority areas of climate study because regional information is needed for climate change impact assessments. Such information is especially important for the region covered by the East Asian monsoon where there is high variability in both space and time. To this end, the Regional Climate Model Intercomparison Project (RMIP) for Asia has been established to evaluate and improve regional climate model (RCM) simulations of the monsoon climate. RMIP operates under joint support of the Asia–Pacific Network for Global Change Research (APN), the Global Change System for Analysis, Research and Training (START), the Chinese Academy of Sciences, and several projects of participating nations. The project currently involves 10 research groups from Australia, China, Japan, South Korea, and the United States, as well as scientists from India, Italy, Mongolia, North Korea, and Russia.
RMIP has three simulation phases: March 1997–August 1998, which covers a full annual cycle and extremes in monsoon behavior; January 1989–December 1998, which examines simulated climatology; and a regional climate change scenario, involving nesting with a global model. This paper is a brief report of RMIP goals, implementation design, and some initial results from the first phase studies.
The Third Comparison of Mesoscale Prediction and Research Experiment (COMPARE) workshop was held in Tokyo, Japan, on 13–15 December 1999, cosponsored by the Japan Meteorological Agency (JMA), Japan Science and Technology Agency, and the World Meteorological Organization. The third case of COMPARE focuses on an event of explosive tropical cyclone [Typhoon Flo (9019)] development that occurred during the cooperative three field experiments, the Tropical Cyclone Motion experiment 1990, Special Experiment Concerning Recurvature and Unusual Motion, and TYPHOON-90, conducted in the western North Pacific in August and September 1990. Fourteen models from nine countries have participated in at least a part of a set of experiments using a combination of four initial conditions provided and three horizontal resolutions. The resultant forecasts were collected, processed, and verified with analyses and observational data at JMA. Archived datasets have been prepared to be distributed to participating members for use in further evaluation studies.
In the workshop, preliminary conclusions from the evaluation study were presented and discussed in the light of initiatives of the experiment and from the viewpoints of tropical cyclone experts. Initial conditions, depending on both large-scale analyses and vortex bogusing, have a large impact on tropical cyclone intensity predictions. Some models succeeded in predicting the explosive deepening of the target typhoon at least qualitatively in terms of the time evolution of central pressure. Horizontal grid spacing has a very large impact on tropical cyclone intensity prediction, while the impact of vertical resolution is less clear, with some models being very sensitive and others less so. The structure of and processes in the eyewall clouds with subsidence inside as well as boundary layer and moist physical processes are considered important in the explosive development of tropical cyclones. Follow-up research activities in this case were proposed to examine possible working hypotheses related to the explosive development.
New strategies for selection of future COMPARE cases were worked out, including seven suitability requirements to be met by candidate cases. The VORTEX95 case was withdrawn as a candidate, and two other possible cases were presented and discussed.
The Third Comparison of Mesoscale Prediction and Research Experiment (COMPARE) workshop was held in Tokyo, Japan, on 13–15 December 1999, cosponsored by the Japan Meteorological Agency (JMA), Japan Science and Technology Agency, and the World Meteorological Organization. The third case of COMPARE focuses on an event of explosive tropical cyclone [Typhoon Flo (9019)] development that occurred during the cooperative three field experiments, the Tropical Cyclone Motion experiment 1990, Special Experiment Concerning Recurvature and Unusual Motion, and TYPHOON-90, conducted in the western North Pacific in August and September 1990. Fourteen models from nine countries have participated in at least a part of a set of experiments using a combination of four initial conditions provided and three horizontal resolutions. The resultant forecasts were collected, processed, and verified with analyses and observational data at JMA. Archived datasets have been prepared to be distributed to participating members for use in further evaluation studies.
In the workshop, preliminary conclusions from the evaluation study were presented and discussed in the light of initiatives of the experiment and from the viewpoints of tropical cyclone experts. Initial conditions, depending on both large-scale analyses and vortex bogusing, have a large impact on tropical cyclone intensity predictions. Some models succeeded in predicting the explosive deepening of the target typhoon at least qualitatively in terms of the time evolution of central pressure. Horizontal grid spacing has a very large impact on tropical cyclone intensity prediction, while the impact of vertical resolution is less clear, with some models being very sensitive and others less so. The structure of and processes in the eyewall clouds with subsidence inside as well as boundary layer and moist physical processes are considered important in the explosive development of tropical cyclones. Follow-up research activities in this case were proposed to examine possible working hypotheses related to the explosive development.
New strategies for selection of future COMPARE cases were worked out, including seven suitability requirements to be met by candidate cases. The VORTEX95 case was withdrawn as a candidate, and two other possible cases were presented and discussed.
Abstract
The goal of the Sea2Cloud project is to study the interplay between surface ocean biogeochemical and physical properties, fluxes to the atmosphere, and ultimately their impact on cloud formation under minimal direct anthropogenic influence. Here we present an interdisciplinary approach, combining atmospheric physics and chemistry with marine biogeochemistry, during a voyage between 41° and 47°S in March 2020. In parallel to ambient measurements of atmospheric composition and seawater biogeochemical properties, we describe semicontrolled experiments to characterize nascent sea spray properties and nucleation from gas-phase biogenic emissions. The experimental framework for studying the impact of the predicted evolution of ozone concentration in the Southern Hemisphere is also detailed. After describing the experimental strategy, we present the oceanic and meteorological context including provisional results on atmospheric thermodynamics, composition, and flux measurements. In situ measurements and flux studies were carried out on different biological communities by sampling surface seawater from subantarctic, subtropical, and frontal water masses. Air–Sea-Interface Tanks (ASIT) were used to quantify biogenic emissions of trace gases under realistic environmental conditions, with nucleation observed in association with biogenic seawater emissions. Sea spray continuously generated produced sea spray fluxes of 34% of organic matter by mass, of which 4% particles had fluorescent properties, and which size distribution resembled the one found in clean sectors of the Southern Ocean. The goal of Sea2Cloud is to generate realistic parameterizations of emission flux dependences of trace gases and nucleation precursors, sea spray, cloud condensation nuclei, and ice nuclei using seawater biogeochemistry, for implementation in regional atmospheric models.
Abstract
The goal of the Sea2Cloud project is to study the interplay between surface ocean biogeochemical and physical properties, fluxes to the atmosphere, and ultimately their impact on cloud formation under minimal direct anthropogenic influence. Here we present an interdisciplinary approach, combining atmospheric physics and chemistry with marine biogeochemistry, during a voyage between 41° and 47°S in March 2020. In parallel to ambient measurements of atmospheric composition and seawater biogeochemical properties, we describe semicontrolled experiments to characterize nascent sea spray properties and nucleation from gas-phase biogenic emissions. The experimental framework for studying the impact of the predicted evolution of ozone concentration in the Southern Hemisphere is also detailed. After describing the experimental strategy, we present the oceanic and meteorological context including provisional results on atmospheric thermodynamics, composition, and flux measurements. In situ measurements and flux studies were carried out on different biological communities by sampling surface seawater from subantarctic, subtropical, and frontal water masses. Air–Sea-Interface Tanks (ASIT) were used to quantify biogenic emissions of trace gases under realistic environmental conditions, with nucleation observed in association with biogenic seawater emissions. Sea spray continuously generated produced sea spray fluxes of 34% of organic matter by mass, of which 4% particles had fluorescent properties, and which size distribution resembled the one found in clean sectors of the Southern Ocean. The goal of Sea2Cloud is to generate realistic parameterizations of emission flux dependences of trace gases and nucleation precursors, sea spray, cloud condensation nuclei, and ice nuclei using seawater biogeochemistry, for implementation in regional atmospheric models.
The Convective Storm Initiation Project (CSIP) is an international project to understand precisely where, when, and how convective clouds form and develop into showers in the mainly maritime environment of southern England. A major aim of CSIP is to compare the results of the very high resolution Met Office weather forecasting model with detailed observations of the early stages of convective clouds and to use the newly gained understanding to improve the predictions of the model.
A large array of ground-based instruments plus two instrumented aircraft, from the U.K. National Centre for Atmospheric Science (NCAS) and the German Institute for Meteorology and Climate Research (IMK), Karlsruhe, were deployed in southern England, over an area centered on the meteorological radars at Chilbolton, during the summers of 2004 and 2005. In addition to a variety of ground-based remote-sensing instruments, numerous rawinsondes were released at one- to two-hourly intervals from six closely spaced sites. The Met Office weather radar network and Meteosat satellite imagery were used to provide context for the observations made by the instruments deployed during CSIP.
This article presents an overview of the CSIP field campaign and examples from CSIP of the types of convective initiation phenomena that are typical in the United Kingdom. It shows the way in which certain kinds of observational data are able to reveal these phenomena and gives an explanation of how the analyses of data from the field campaign will be used in the development of an improved very high resolution NWP model for operational use.
The Convective Storm Initiation Project (CSIP) is an international project to understand precisely where, when, and how convective clouds form and develop into showers in the mainly maritime environment of southern England. A major aim of CSIP is to compare the results of the very high resolution Met Office weather forecasting model with detailed observations of the early stages of convective clouds and to use the newly gained understanding to improve the predictions of the model.
A large array of ground-based instruments plus two instrumented aircraft, from the U.K. National Centre for Atmospheric Science (NCAS) and the German Institute for Meteorology and Climate Research (IMK), Karlsruhe, were deployed in southern England, over an area centered on the meteorological radars at Chilbolton, during the summers of 2004 and 2005. In addition to a variety of ground-based remote-sensing instruments, numerous rawinsondes were released at one- to two-hourly intervals from six closely spaced sites. The Met Office weather radar network and Meteosat satellite imagery were used to provide context for the observations made by the instruments deployed during CSIP.
This article presents an overview of the CSIP field campaign and examples from CSIP of the types of convective initiation phenomena that are typical in the United Kingdom. It shows the way in which certain kinds of observational data are able to reveal these phenomena and gives an explanation of how the analyses of data from the field campaign will be used in the development of an improved very high resolution NWP model for operational use.
