Search Results
You are looking at 1 - 8 of 8 items for :
- Author or Editor: Nitin Bharadwaj x
- Article x
- Refine by Access: All Content x
Abstract
The use of solid-state transmitters is becoming increasingly viable for atmospheric radars and is a key part of the strategy to realize any dense network of low-powered radars. However, solid-state transmitters have low peak powers and this necessitates the use of pulse compression waveforms. In this paper frequency diversity in a wideband waveform design is proposed to mitigate the low sensitivity of solid-state transmitters. In addition, the waveforms mitigate the range-eclipsing problem associated with long pulse compression. An analysis of the performance of pulse compression using mismatched compression filters designed to minimize sidelobe levels is presented. The impact of the range sidelobe level on the retrieval of Doppler moments is discussed. Realistic simulations are performed based on both the Colorado State University–University of Chicago–Illinois State Water Survey (CSU–CHILL) and the Center for Collaborative Adaptive Sensing of the Atmosphere (CASA) Integrated Project I (IP1) radar data.
Abstract
The use of solid-state transmitters is becoming increasingly viable for atmospheric radars and is a key part of the strategy to realize any dense network of low-powered radars. However, solid-state transmitters have low peak powers and this necessitates the use of pulse compression waveforms. In this paper frequency diversity in a wideband waveform design is proposed to mitigate the low sensitivity of solid-state transmitters. In addition, the waveforms mitigate the range-eclipsing problem associated with long pulse compression. An analysis of the performance of pulse compression using mismatched compression filters designed to minimize sidelobe levels is presented. The impact of the range sidelobe level on the retrieval of Doppler moments is discussed. Realistic simulations are performed based on both the Colorado State University–University of Chicago–Illinois State Water Survey (CSU–CHILL) and the Center for Collaborative Adaptive Sensing of the Atmosphere (CASA) Integrated Project I (IP1) radar data.
Abstract
This paper describes the waveform design space and signal processing system for dual-polarization Doppler weather radar operating at X band. The performance of the waveforms is presented with ground clutter suppression capability and mitigation of range–velocity ambiguity. The operational waveform is designed based on operational requirements and system/hardware requirements. A dual–Pulse Repetition Frequency (PRF) waveform was developed and implemented for the first generation X-band radars deployed by the Center for Collaborative Adaptive Sensing of the Atmosphere (CASA). This paper presents an evaluation of the performance of the waveforms based on simulations and data collected by the first-generation CASA radars during operations.
Abstract
This paper describes the waveform design space and signal processing system for dual-polarization Doppler weather radar operating at X band. The performance of the waveforms is presented with ground clutter suppression capability and mitigation of range–velocity ambiguity. The operational waveform is designed based on operational requirements and system/hardware requirements. A dual–Pulse Repetition Frequency (PRF) waveform was developed and implemented for the first generation X-band radars deployed by the Center for Collaborative Adaptive Sensing of the Atmosphere (CASA). This paper presents an evaluation of the performance of the waveforms based on simulations and data collected by the first-generation CASA radars during operations.
Abstract
The acquisition of scanning cloud radars by the Atmospheric Radiation Measurement (ARM) program and research institutions around the world generates the need for developing operational scan strategies for cloud radars. Here, the first generation of sampling strategies for the scanning ARM cloud radars (SACRs) is presented. These scan strategies are designed to address the scientific objectives of ARM; however, they introduce an initial framework for operational scanning cloud radars. While the weather community uses scan strategies that are based on a sequence of scans at constant elevations, the SACR scan strategies are based on a sequence of scans at constant azimuth. This is attributed to the cloud geometrical properties, which are vastly different from the rain and snow shafts that are the primary targets of precipitation radars; the need to cover the cone of silence; and the scanning limitations of the SACRs. A “cloud surveillance” scan strategy is introduced that is based on a sequence of horizon-to-horizon range–height indicator (RHI) scans that sample the hemispherical sky (HS) every 30° azimuth (HSRHI). The HSRHI scan strategy is complimented with a low-elevation plan position indicator (PPI) scan. The HSRHI and PPI are repeated every 30 min to provide a static view of the cloud conditions around the SACR location. Between the HSRHI and PPI scan strategies, other scan strategies are introduced depending on the cloud conditions. In the future, information about the atmospheric cloud state will be used in a closed-loop process to optimize the selection of the SACR scan strategy.
Abstract
The acquisition of scanning cloud radars by the Atmospheric Radiation Measurement (ARM) program and research institutions around the world generates the need for developing operational scan strategies for cloud radars. Here, the first generation of sampling strategies for the scanning ARM cloud radars (SACRs) is presented. These scan strategies are designed to address the scientific objectives of ARM; however, they introduce an initial framework for operational scanning cloud radars. While the weather community uses scan strategies that are based on a sequence of scans at constant elevations, the SACR scan strategies are based on a sequence of scans at constant azimuth. This is attributed to the cloud geometrical properties, which are vastly different from the rain and snow shafts that are the primary targets of precipitation radars; the need to cover the cone of silence; and the scanning limitations of the SACRs. A “cloud surveillance” scan strategy is introduced that is based on a sequence of horizon-to-horizon range–height indicator (RHI) scans that sample the hemispherical sky (HS) every 30° azimuth (HSRHI). The HSRHI scan strategy is complimented with a low-elevation plan position indicator (PPI) scan. The HSRHI and PPI are repeated every 30 min to provide a static view of the cloud conditions around the SACR location. Between the HSRHI and PPI scan strategies, other scan strategies are introduced depending on the cloud conditions. In the future, information about the atmospheric cloud state will be used in a closed-loop process to optimize the selection of the SACR scan strategy.
Abstract
To improve understanding of the convective processes key to the Madden–Julian oscillation (MJO) initiation, the Dynamics of the MJO (DYNAMO) and the Atmospheric Radiation Measurement Program (ARM) MJO Investigation Experiment (AMIE) collected 4 months of observations from three radars—the S-band dual-polarization Doppler radar (S-Pol), the C-band Shared Mobile Atmospheric Research and Teaching Radar (SMART-R), and Ka-band ARM zenith radar (KAZR)—along with radiosonde and comprehensive surface meteorological instruments on Addu Atoll, Maldives, in the tropical Indian Ocean. One DYNAMO/AMIE hypothesis suggests that the evolution of shallow and congestus cloud populations is essential to the initiation of the MJO. This study focuses on evaluating the ability of these three radars to document the full spectrum of cloud populations and to construct a merged cloud–precipitation radar dataset that can be used to test this hypothesis. Comparisons between collocated observations from the three radars show that KAZR provides the only reliable estimate of shallow clouds, while S-Pol/SMART-R can reasonably detect congestus within the 30–50-km range in addition to precipitating deep clouds. On the other hand, KAZR underestimates cloud-top heights due to rainfall attenuation in ~34% of the precipitating clouds, and an empirical method to correct KAZR cloud-top height bias is proposed. Finally, a merged KAZR–S-Pol dataset is produced to provide improved cloud-top height estimates, total hydrometeor microphysics, and radiative heating rate retrievals. With this dataset the full spectrum of tropical convective clouds during DYNAMO/AMIE can be reliably constructed and, together with complimentary radiosonde data, it can be used to study the role of shallow and congestus clouds in the initiation of the MJO.
Abstract
To improve understanding of the convective processes key to the Madden–Julian oscillation (MJO) initiation, the Dynamics of the MJO (DYNAMO) and the Atmospheric Radiation Measurement Program (ARM) MJO Investigation Experiment (AMIE) collected 4 months of observations from three radars—the S-band dual-polarization Doppler radar (S-Pol), the C-band Shared Mobile Atmospheric Research and Teaching Radar (SMART-R), and Ka-band ARM zenith radar (KAZR)—along with radiosonde and comprehensive surface meteorological instruments on Addu Atoll, Maldives, in the tropical Indian Ocean. One DYNAMO/AMIE hypothesis suggests that the evolution of shallow and congestus cloud populations is essential to the initiation of the MJO. This study focuses on evaluating the ability of these three radars to document the full spectrum of cloud populations and to construct a merged cloud–precipitation radar dataset that can be used to test this hypothesis. Comparisons between collocated observations from the three radars show that KAZR provides the only reliable estimate of shallow clouds, while S-Pol/SMART-R can reasonably detect congestus within the 30–50-km range in addition to precipitating deep clouds. On the other hand, KAZR underestimates cloud-top heights due to rainfall attenuation in ~34% of the precipitating clouds, and an empirical method to correct KAZR cloud-top height bias is proposed. Finally, a merged KAZR–S-Pol dataset is produced to provide improved cloud-top height estimates, total hydrometeor microphysics, and radiative heating rate retrievals. With this dataset the full spectrum of tropical convective clouds during DYNAMO/AMIE can be reliably constructed and, together with complimentary radiosonde data, it can be used to study the role of shallow and congestus clouds in the initiation of the MJO.
Abstract
The scanning Atmospheric Radiation Measurement (ARM) Program cloud radars (SACRs) are the primary instruments for documenting the four-dimensional structure and evolution of clouds within a 20–30-km radius of the ARM fixed and mobile sites. Here, the postprocessing of the calibrated SACR measurements is discussed. First, a feature mask algorithm that objectively determines the presence of significant radar returns is described. The feature mask algorithm is based on the statistical properties of radar receiver noise. It accounts for atmospheric emission and is applicable even for SACR profiles with few or no signal-free range gates. Using the nearest-in-time atmospheric sounding, the SACR radar reflectivities are corrected for gaseous attenuation (water vapor and oxygen) using a line-by-line absorption model. Despite having a high pulse repetition frequency, the SACR has a narrow Nyquist velocity limit and thus Doppler velocity folding is commonly observed. An unfolding algorithm that makes use of a first guess for the true Doppler velocity using horizontal wind measurements from the nearest sounding is described. The retrieval of the horizontal wind profile from the hemispherical sky range–height indicator SACR scan observations and/or nearest sounding is described. The retrieved horizontal wind profile can be used to adaptively configure SACR scan strategies that depend on wind direction. Several remaining challenges are discussed, including the removal of insect and second-trip echoes. The described algorithms significantly enhance SACR data quality and constitute an important step toward the utilization of SACR measurements for cloud research.
Abstract
The scanning Atmospheric Radiation Measurement (ARM) Program cloud radars (SACRs) are the primary instruments for documenting the four-dimensional structure and evolution of clouds within a 20–30-km radius of the ARM fixed and mobile sites. Here, the postprocessing of the calibrated SACR measurements is discussed. First, a feature mask algorithm that objectively determines the presence of significant radar returns is described. The feature mask algorithm is based on the statistical properties of radar receiver noise. It accounts for atmospheric emission and is applicable even for SACR profiles with few or no signal-free range gates. Using the nearest-in-time atmospheric sounding, the SACR radar reflectivities are corrected for gaseous attenuation (water vapor and oxygen) using a line-by-line absorption model. Despite having a high pulse repetition frequency, the SACR has a narrow Nyquist velocity limit and thus Doppler velocity folding is commonly observed. An unfolding algorithm that makes use of a first guess for the true Doppler velocity using horizontal wind measurements from the nearest sounding is described. The retrieval of the horizontal wind profile from the hemispherical sky range–height indicator SACR scan observations and/or nearest sounding is described. The retrieved horizontal wind profile can be used to adaptively configure SACR scan strategies that depend on wind direction. Several remaining challenges are discussed, including the removal of insect and second-trip echoes. The described algorithms significantly enhance SACR data quality and constitute an important step toward the utilization of SACR measurements for cloud research.
Abstract
Intrusions of warm, moist air into the Arctic during winter have emerged as important contributors to Arctic surface warming. Previous studies indicate that temperature, moisture, and hydrometeor enhancements during intrusions all make contributions to surface warming via emission of radiation down to the surface. Here, datasets from instrumentation at the Atmospheric Radiation Measurement User Facility in Utqiaġvik (formerly Barrow) for the six months from November through April for the six winter seasons of 2013/14–2018/19 were used to quantify the atmospheric state. These datasets subsequently served as inputs to compute surface downwelling longwave irradiances via radiative transfer computations at 1-min intervals with different combinations of constituents over the six winter seasons. The computed six winter average irradiance with all constituents included was 205.0 W m−2, close to the average measured irradiance of 206.7 W m−2, a difference of −0.8%. During this period, water vapor was the most important contributor to the irradiance. The computed average irradiance with dry gas was 71.9 W m−2. Separately adding water vapor, liquid, or ice to the dry atmosphere led to average increases of 2.4, 1.8, and 1.6 times the dry atmosphere irradiance, respectively. During the analysis period, 15 episodes of warm, moist air intrusions were identified. During the intrusions, individual contributions from elevated temperature, water vapor, liquid water, and ice water were found to be comparable to each other. These findings indicate that all properties of the atmospheric state must be known in order to quantify the radiation coming down to the Arctic surface during winter.
Abstract
Intrusions of warm, moist air into the Arctic during winter have emerged as important contributors to Arctic surface warming. Previous studies indicate that temperature, moisture, and hydrometeor enhancements during intrusions all make contributions to surface warming via emission of radiation down to the surface. Here, datasets from instrumentation at the Atmospheric Radiation Measurement User Facility in Utqiaġvik (formerly Barrow) for the six months from November through April for the six winter seasons of 2013/14–2018/19 were used to quantify the atmospheric state. These datasets subsequently served as inputs to compute surface downwelling longwave irradiances via radiative transfer computations at 1-min intervals with different combinations of constituents over the six winter seasons. The computed six winter average irradiance with all constituents included was 205.0 W m−2, close to the average measured irradiance of 206.7 W m−2, a difference of −0.8%. During this period, water vapor was the most important contributor to the irradiance. The computed average irradiance with dry gas was 71.9 W m−2. Separately adding water vapor, liquid, or ice to the dry atmosphere led to average increases of 2.4, 1.8, and 1.6 times the dry atmosphere irradiance, respectively. During the analysis period, 15 episodes of warm, moist air intrusions were identified. During the intrusions, individual contributions from elevated temperature, water vapor, liquid water, and ice water were found to be comparable to each other. These findings indicate that all properties of the atmospheric state must be known in order to quantify the radiation coming down to the Arctic surface during winter.
Dense networks of short-range radars capable of mapping storms and detecting atmospheric hazards are described. Composed of small X-band (9.4 GHz) radars spaced tens of kilometers apart, these networks defeat the Earth curvature blockage that limits today s long-range weather radars and enables observing capabilities fundamentally beyond the operational state-of-the-art radars. These capabilities include multiple Doppler observations for mapping horizontal wind vectors, subkilometer spatial resolution, and rapid-update (tens of seconds) observations extending from the boundary layer up to the tops of storms. The small physical size and low-power design of these radars permits the consideration of commercial electronic manufacturing approaches and radar installation on rooftops, communications towers, and other infrastructure elements, leading to cost-effective network deployments. The networks can be architected in such a way that the sampling strategy dynamically responds to changing weather to simultaneously accommodate the data needs of multiple types of end users. Such networks have the potential to supplement, or replace, the physically large long-range civil infrastructure radars in use today.
Dense networks of short-range radars capable of mapping storms and detecting atmospheric hazards are described. Composed of small X-band (9.4 GHz) radars spaced tens of kilometers apart, these networks defeat the Earth curvature blockage that limits today s long-range weather radars and enables observing capabilities fundamentally beyond the operational state-of-the-art radars. These capabilities include multiple Doppler observations for mapping horizontal wind vectors, subkilometer spatial resolution, and rapid-update (tens of seconds) observations extending from the boundary layer up to the tops of storms. The small physical size and low-power design of these radars permits the consideration of commercial electronic manufacturing approaches and radar installation on rooftops, communications towers, and other infrastructure elements, leading to cost-effective network deployments. The networks can be architected in such a way that the sampling strategy dynamically responds to changing weather to simultaneously accommodate the data needs of multiple types of end users. Such networks have the potential to supplement, or replace, the physically large long-range civil infrastructure radars in use today.
Abstract
The Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign was designed to improve understanding of orographic cloud life cycles in relation to surrounding atmospheric thermodynamic, flow, and aerosol conditions. The deployment to the Sierras de Córdoba range in north-central Argentina was chosen because of very frequent cumulus congestus, deep convection initiation, and mesoscale convective organization uniquely observable from a fixed site. The C-band Scanning Atmospheric Radiation Measurement (ARM) Precipitation Radar was deployed for the first time with over 50 ARM Mobile Facility atmospheric state, surface, aerosol, radiation, cloud, and precipitation instruments between October 2018 and April 2019. An intensive observing period (IOP) coincident with the RELAMPAGO field campaign was held between 1 November and 15 December during which 22 flights were performed by the ARM Gulfstream-1 aircraft. A multitude of atmospheric processes and cloud conditions were observed over the 7-month campaign, including numerous orographic cumulus and stratocumulus events; new particle formation and growth producing high aerosol concentrations; drizzle formation in fog and shallow liquid clouds; very low aerosol conditions following wet deposition in heavy rainfall; initiation of ice in congestus clouds across a range of temperatures; extreme deep convection reaching 21-km altitudes; and organization of intense, hail-containing supercells and mesoscale convective systems. These comprehensive datasets include many of the first ever collected in this region and provide new opportunities to study orographic cloud evolution and interactions with meteorological conditions, aerosols, surface conditions, and radiation in mountainous terrain.
Abstract
The Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign was designed to improve understanding of orographic cloud life cycles in relation to surrounding atmospheric thermodynamic, flow, and aerosol conditions. The deployment to the Sierras de Córdoba range in north-central Argentina was chosen because of very frequent cumulus congestus, deep convection initiation, and mesoscale convective organization uniquely observable from a fixed site. The C-band Scanning Atmospheric Radiation Measurement (ARM) Precipitation Radar was deployed for the first time with over 50 ARM Mobile Facility atmospheric state, surface, aerosol, radiation, cloud, and precipitation instruments between October 2018 and April 2019. An intensive observing period (IOP) coincident with the RELAMPAGO field campaign was held between 1 November and 15 December during which 22 flights were performed by the ARM Gulfstream-1 aircraft. A multitude of atmospheric processes and cloud conditions were observed over the 7-month campaign, including numerous orographic cumulus and stratocumulus events; new particle formation and growth producing high aerosol concentrations; drizzle formation in fog and shallow liquid clouds; very low aerosol conditions following wet deposition in heavy rainfall; initiation of ice in congestus clouds across a range of temperatures; extreme deep convection reaching 21-km altitudes; and organization of intense, hail-containing supercells and mesoscale convective systems. These comprehensive datasets include many of the first ever collected in this region and provide new opportunities to study orographic cloud evolution and interactions with meteorological conditions, aerosols, surface conditions, and radiation in mountainous terrain.
