Search Results
You are looking at 1 - 5 of 5 items for :
- Author or Editor: Peter Clark x
- Monthly Weather Review x
- Refine by Access: All Content x
Abstract
Flow in geophysical fluids is commonly summarized by coherent streams (e.g., conveyor belt flows in extratropical cyclones or jet streaks in the upper troposphere). Typically, parcel trajectories are calculated from the flow field and subjective thresholds are used to distinguish coherent streams of interest. This methodology contribution develops a more objective approach to distinguish coherent airstreams within extratropical cyclones. Agglomerative clustering is applied to trajectories along with a method to identify the optimal number of cluster classes. The methodology is applied to trajectories associated with the low-level jets of a well-studied extratropical cyclone. For computational efficiency, a constraint that trajectories must pass through these jet regions is applied prior to clustering; the partitioning into different airstreams is then performed by the agglomerative clustering. It is demonstrated that the methodology can identify the salient flow structures of cyclones: the warm and cold conveyor belts. A test focusing on the airstreams terminating at the tip of the bent-back front further demonstrates the success of the method in that it can distinguish finescale flow structure such as descending sting-jet airstreams.
Abstract
Flow in geophysical fluids is commonly summarized by coherent streams (e.g., conveyor belt flows in extratropical cyclones or jet streaks in the upper troposphere). Typically, parcel trajectories are calculated from the flow field and subjective thresholds are used to distinguish coherent streams of interest. This methodology contribution develops a more objective approach to distinguish coherent airstreams within extratropical cyclones. Agglomerative clustering is applied to trajectories along with a method to identify the optimal number of cluster classes. The methodology is applied to trajectories associated with the low-level jets of a well-studied extratropical cyclone. For computational efficiency, a constraint that trajectories must pass through these jet regions is applied prior to clustering; the partitioning into different airstreams is then performed by the agglomerative clustering. It is demonstrated that the methodology can identify the salient flow structures of cyclones: the warm and cold conveyor belts. A test focusing on the airstreams terminating at the tip of the bent-back front further demonstrates the success of the method in that it can distinguish finescale flow structure such as descending sting-jet airstreams.
Abstract
An isolated thunderstorm formed in the southern United Kingdom on 15 June 2005 and moved through the area where a large number of observational instruments were deployed as part of the Convective Storm Initiation Project. Earlier, a convergence line had formed downstream of Devon in the southwest of the United Kingdom in a southwesterly airflow, along which a series of light showers had formed. The depth of these showers was limited by a capping inversion, or lid, at around 2.5 km. The deep thunderstorm convection developed from one of these showers when the convection broke through the lid and ascended up to the next inversion, associated with a tropopause fold at around 6 km. A series of clear-air reflectivity RHIs are used to map the height of the capping inversion and its lifting resulting from the ascent along the convergence line. The origins of the lid are tracked back to some descent from the midtroposphere along dry adiabats. The strength of the lid was weaker along a northwest-to-southeast-oriented region located behind an overrunning upper cold front. The transition from shallow to deep convection occurred where this region with a weaker lid intersected the region with a raised lid, oriented southwest to northeast, downstream of Devon. A very high resolution forecast model that is being developed by the Met Office predicted the isolated thunderstorm successfully. This success depended on the accurate representation of the following two scales: the synoptic-scale and the surface-forced mesoscale convergence line. The interaction between these scales localized the convection sufficiently in space and time for the initiation and subsequent development to be highly predictable despite the relatively poor representation in the model of processes at the cloud scale.
Abstract
An isolated thunderstorm formed in the southern United Kingdom on 15 June 2005 and moved through the area where a large number of observational instruments were deployed as part of the Convective Storm Initiation Project. Earlier, a convergence line had formed downstream of Devon in the southwest of the United Kingdom in a southwesterly airflow, along which a series of light showers had formed. The depth of these showers was limited by a capping inversion, or lid, at around 2.5 km. The deep thunderstorm convection developed from one of these showers when the convection broke through the lid and ascended up to the next inversion, associated with a tropopause fold at around 6 km. A series of clear-air reflectivity RHIs are used to map the height of the capping inversion and its lifting resulting from the ascent along the convergence line. The origins of the lid are tracked back to some descent from the midtroposphere along dry adiabats. The strength of the lid was weaker along a northwest-to-southeast-oriented region located behind an overrunning upper cold front. The transition from shallow to deep convection occurred where this region with a weaker lid intersected the region with a raised lid, oriented southwest to northeast, downstream of Devon. A very high resolution forecast model that is being developed by the Met Office predicted the isolated thunderstorm successfully. This success depended on the accurate representation of the following two scales: the synoptic-scale and the surface-forced mesoscale convergence line. The interaction between these scales localized the convection sufficiently in space and time for the initiation and subsequent development to be highly predictable despite the relatively poor representation in the model of processes at the cloud scale.
Abstract
Many factors, both mesoscale and larger scale, often come together in order for a particular convective initiation to take place. The authors describe a modeling study of a case from the Convective Storms Initiation Project (CSIP) in which a single thunderstorm formed behind a front in the southern United Kingdom. The key features of the case were a tongue of low-level high θw air associated with a forward-sloping split front (overrunning lower θw air above), a convergence line, and a “lid” of high static stability air, which the shower was initially constrained below but later broke through. In this paper, the authors analyze the initiation of the storm, which can be traced back to a region of high ground (Dartmoor) at around 0700 UTC, in more detail using model sensitivity studies with the Met Office Unified Model (MetUM). It is established that the convergence line was initially caused by roughness effects but had a significant thermal component later. Dartmoor had a key role in the development of the thunderstorm. A period of asymmetric flow over the high ground, with stronger low-level descent in the lee, led to a hole in a layer of low-level clouds downstream. The surface solar heating through this hole, in combination with the tongue of low-level high θw air associated with the front, caused the shower to initiate with sufficient lifting to enable it later to break through the lid.
Abstract
Many factors, both mesoscale and larger scale, often come together in order for a particular convective initiation to take place. The authors describe a modeling study of a case from the Convective Storms Initiation Project (CSIP) in which a single thunderstorm formed behind a front in the southern United Kingdom. The key features of the case were a tongue of low-level high θw air associated with a forward-sloping split front (overrunning lower θw air above), a convergence line, and a “lid” of high static stability air, which the shower was initially constrained below but later broke through. In this paper, the authors analyze the initiation of the storm, which can be traced back to a region of high ground (Dartmoor) at around 0700 UTC, in more detail using model sensitivity studies with the Met Office Unified Model (MetUM). It is established that the convergence line was initially caused by roughness effects but had a significant thermal component later. Dartmoor had a key role in the development of the thunderstorm. A period of asymmetric flow over the high ground, with stronger low-level descent in the lee, led to a hole in a layer of low-level clouds downstream. The surface solar heating through this hole, in combination with the tongue of low-level high θw air associated with the front, caused the shower to initiate with sufficient lifting to enable it later to break through the lid.
Abstract
With many operational centers moving toward order 1-km-gridlength models for routine weather forecasting, this paper presents a systematic investigation of the properties of high-resolution versions of the Met Office Unified Model for short-range forecasting of convective rainfall events. The authors describe a suite of configurations of the Met Office Unified Model running with grid lengths of 12, 4, and 1 km and analyze results from these models for a number of convective cases from the summers of 2003, 2004, and 2005. The analysis includes subjective evaluation of the rainfall fields and comparisons of rainfall amounts, initiation, cell statistics, and a scale-selective verification technique. It is shown that the 4- and 1-km-gridlength models often give more realistic-looking precipitation fields because convection is represented explicitly rather than parameterized. However, the 4-km model representation suffers from large convective cells and delayed initiation because the grid length is too long to correctly reproduce the convection explicitly. These problems are not as evident in the 1-km model, although it does suffer from too numerous small cells in some situations. Both the 4- and 1-km models suffer from poor representation at the start of the forecast in the period when the high-resolution detail is spinning up from the lower-resolution (12 km) starting data used. A scale-selective precipitation verification technique implies that for later times in the forecasts (after the spinup period) the 1-km model performs better than the 12- and 4-km models for lower rainfall thresholds. For higher thresholds the 4-km model scores almost as well as the 1-km model, and both do better than the 12-km model.
Abstract
With many operational centers moving toward order 1-km-gridlength models for routine weather forecasting, this paper presents a systematic investigation of the properties of high-resolution versions of the Met Office Unified Model for short-range forecasting of convective rainfall events. The authors describe a suite of configurations of the Met Office Unified Model running with grid lengths of 12, 4, and 1 km and analyze results from these models for a number of convective cases from the summers of 2003, 2004, and 2005. The analysis includes subjective evaluation of the rainfall fields and comparisons of rainfall amounts, initiation, cell statistics, and a scale-selective verification technique. It is shown that the 4- and 1-km-gridlength models often give more realistic-looking precipitation fields because convection is represented explicitly rather than parameterized. However, the 4-km model representation suffers from large convective cells and delayed initiation because the grid length is too long to correctly reproduce the convection explicitly. These problems are not as evident in the 1-km model, although it does suffer from too numerous small cells in some situations. Both the 4- and 1-km models suffer from poor representation at the start of the forecast in the period when the high-resolution detail is spinning up from the lower-resolution (12 km) starting data used. A scale-selective precipitation verification technique implies that for later times in the forecasts (after the spinup period) the 1-km model performs better than the 12- and 4-km models for lower rainfall thresholds. For higher thresholds the 4-km model scores almost as well as the 1-km model, and both do better than the 12-km model.
Abstract
A set of high-resolution radar observations of convective storms has been collected to evaluate such storms in the Met Office Unified Model during the Dynamical and Microphysical Evolution of Convective Storms (DYMECS) project. The 3-GHz Chilbolton Advanced Meteorological Radar was set up with a scan-scheduling algorithm to automatically track convective storms identified in real time from the operational rainfall radar network. More than 1000 storm observations gathered over 15 days in 2011 and 2012 are used to evaluate the model under various synoptic conditions supporting convection. In terms of the detailed three-dimensional morphology, storms in the 1500-m grid length simulations are shown to produce horizontal structures a factor of 1.5–2 wider compared to radar observations. A set of nested model runs at grid lengths down to 100 m show that the models converge in terms of storm width, but the storm structures in the simulations with the smallest grid lengths are too narrow and too intense compared to the radar observations. The modeled storms were surrounded by a region of drizzle without ice reflectivities above 0 dBZ aloft, which was related to the dominance of ice crystals and was improved by allowing only aggregates as an ice particle habit. Simulations with graupel outperformed the standard configuration for heavy-rain profiles, but the storm structures were a factor of 2 too wide and the convective cores 2 km too deep.
Abstract
A set of high-resolution radar observations of convective storms has been collected to evaluate such storms in the Met Office Unified Model during the Dynamical and Microphysical Evolution of Convective Storms (DYMECS) project. The 3-GHz Chilbolton Advanced Meteorological Radar was set up with a scan-scheduling algorithm to automatically track convective storms identified in real time from the operational rainfall radar network. More than 1000 storm observations gathered over 15 days in 2011 and 2012 are used to evaluate the model under various synoptic conditions supporting convection. In terms of the detailed three-dimensional morphology, storms in the 1500-m grid length simulations are shown to produce horizontal structures a factor of 1.5–2 wider compared to radar observations. A set of nested model runs at grid lengths down to 100 m show that the models converge in terms of storm width, but the storm structures in the simulations with the smallest grid lengths are too narrow and too intense compared to the radar observations. The modeled storms were surrounded by a region of drizzle without ice reflectivities above 0 dBZ aloft, which was related to the dominance of ice crystals and was improved by allowing only aggregates as an ice particle habit. Simulations with graupel outperformed the standard configuration for heavy-rain profiles, but the storm structures were a factor of 2 too wide and the convective cores 2 km too deep.
