Search Results
You are looking at 1 - 7 of 7 items for :
- Author or Editor: Shoichi Shige x
- Journal of Applied Meteorology and Climatology x
- Refine by Access: All Content x
Abstract
The spectral latent heating (SLH) algorithm was developed to estimate apparent heat source (Q 1) profiles for the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) in Parts I and II of this study. In this paper, the SLH algorithm is used to estimate apparent moisture sink (Q 2) profiles. The procedure of Q 2 retrieval is the same as that of heating retrieval except for using the Q 2 profile lookup tables derived from numerical simulations of tropical cloud systems from the Tropical Ocean and Global Atmosphere (TOGA) Coupled Ocean–Atmosphere Response Experiment (COARE) utilizing a cloud-resolving model (CRM). The Q 2 profiles were reconstructed from CRM-simulated parameters with the COARE table and then compared with CRM-simulated “true” Q 2 profiles, which were computed directly from the water vapor equation in the model. The consistency check indicates that discrepancies between the SLH-reconstructed and CRM-simulated profiles for Q 2, especially at low levels, are larger than those for Q 1 and are attributable to moistening for the nonprecipitating region that SLH cannot reconstruct. Nevertheless, the SLH-reconstructed total Q 2 profiles are in good agreement with the CRM-simulated ones. The SLH algorithm was applied to PR data, and the results were compared with Q 2 profiles derived from the budget study. Although discrepancies between the SLH-retrieved and sounding-based profiles for Q 2 for the South China Sea Monsoon Experiment (SCSMEX) are larger than those for heating, key features of the vertical profiles agree well. The SLH algorithm can also estimate differences of Q 2 between the western Pacific Ocean and the Atlantic Ocean, consistent with the results from the budget study.
Abstract
The spectral latent heating (SLH) algorithm was developed to estimate apparent heat source (Q 1) profiles for the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) in Parts I and II of this study. In this paper, the SLH algorithm is used to estimate apparent moisture sink (Q 2) profiles. The procedure of Q 2 retrieval is the same as that of heating retrieval except for using the Q 2 profile lookup tables derived from numerical simulations of tropical cloud systems from the Tropical Ocean and Global Atmosphere (TOGA) Coupled Ocean–Atmosphere Response Experiment (COARE) utilizing a cloud-resolving model (CRM). The Q 2 profiles were reconstructed from CRM-simulated parameters with the COARE table and then compared with CRM-simulated “true” Q 2 profiles, which were computed directly from the water vapor equation in the model. The consistency check indicates that discrepancies between the SLH-reconstructed and CRM-simulated profiles for Q 2, especially at low levels, are larger than those for Q 1 and are attributable to moistening for the nonprecipitating region that SLH cannot reconstruct. Nevertheless, the SLH-reconstructed total Q 2 profiles are in good agreement with the CRM-simulated ones. The SLH algorithm was applied to PR data, and the results were compared with Q 2 profiles derived from the budget study. Although discrepancies between the SLH-retrieved and sounding-based profiles for Q 2 for the South China Sea Monsoon Experiment (SCSMEX) are larger than those for heating, key features of the vertical profiles agree well. The SLH algorithm can also estimate differences of Q 2 between the western Pacific Ocean and the Atlantic Ocean, consistent with the results from the budget study.
Abstract
Heavy rainfall associated with shallow orographic rainfall systems has been underestimated by passive microwave radiometer algorithms owing to weak ice scattering signatures. The authors improve the performance of estimates made using a passive microwave radiometer algorithm, the Global Satellite Mapping of Precipitation (GSMaP) algorithm, from data obtained by the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) for orographic heavy rainfall. An orographic/nonorographic rainfall classification scheme is developed on the basis of orographically forced upward vertical motion and the convergence of surface moisture flux estimated from ancillary data. Lookup tables derived from orographic precipitation profiles are used to estimate rainfall for an orographic rainfall pixel, whereas those derived from original precipitation profiles are used to estimate rainfall for a nonorographic rainfall pixel. Rainfall estimates made using the revised GSMaP algorithm are in better agreement with estimates from data obtained by the radar on the TRMM satellite and by gauge-calibrated ground radars than are estimates made using the original GSMaP algorithm.
Abstract
Heavy rainfall associated with shallow orographic rainfall systems has been underestimated by passive microwave radiometer algorithms owing to weak ice scattering signatures. The authors improve the performance of estimates made using a passive microwave radiometer algorithm, the Global Satellite Mapping of Precipitation (GSMaP) algorithm, from data obtained by the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) for orographic heavy rainfall. An orographic/nonorographic rainfall classification scheme is developed on the basis of orographically forced upward vertical motion and the convergence of surface moisture flux estimated from ancillary data. Lookup tables derived from orographic precipitation profiles are used to estimate rainfall for an orographic rainfall pixel, whereas those derived from original precipitation profiles are used to estimate rainfall for a nonorographic rainfall pixel. Rainfall estimates made using the revised GSMaP algorithm are in better agreement with estimates from data obtained by the radar on the TRMM satellite and by gauge-calibrated ground radars than are estimates made using the original GSMaP algorithm.
Abstract
The spectral latent heating (SLH) algorithm was developed for the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) in Part I of this study. The method uses PR information [precipitation-top height (PTH), precipitation rates at the surface and melting level, and rain type] to select heating profiles from lookup tables. Heating-profile lookup tables for the three rain types—convective, shallow stratiform, and anvil rain (deep stratiform with a melting level)—were derived from numerical simulations of tropical cloud systems from the Tropical Ocean and Global Atmosphere Coupled Ocean–Atmosphere Response Experiment (TOGA COARE) utilizing a cloud-resolving model (CRM). To assess its global application to TRMM PR data, the universality of the lookup tables from the TOGA COARE simulations is examined in this paper. Heating profiles are reconstructed from CRM-simulated parameters (i.e., PTH, precipitation rates at the surface and melting level, and rain type) and are compared with the true CRM-simulated heating profiles, which are computed directly by the model thermodynamic equation. CRM-simulated data from the Global Atmospheric Research Program Atlantic Tropical Experiment (GATE), South China Sea Monsoon Experiment (SCSMEX), and Kwajalein Experiment (KWAJEX) are used as a consistency check. The consistency check reveals discrepancies between the SLH-reconstructed and Goddard Cumulus Ensemble (GCE)-simulated heating above the melting level in the convective region and at the melting level in the stratiform region that are attributable to the TOGA COARE table. Discrepancies in the convective region are due to differences in the vertical distribution of deep convective heating due to the relative importance of liquid and ice water processes, which varies from case to case. Discrepancies in the stratiform region are due to differences in the level separating upper-level heating and lower-level cooling. Based on these results, improvements were made to the SLH algorithm. Convective heating retrieval is now separated into upper-level heating due to ice processes and lower-level heating due to liquid water processes. In the stratiform region, the heating profile is shifted up or down by matching the melting level in the TOGA COARE lookup table with the observed one. Consistency checks indicate the revised SLH algorithm performs much better for both the convective and stratiform components than does the original one. The revised SLH algorithm was applied to PR data, and the results were compared with heating profiles derived diagnostically from SCSMEX sounding data. Key features of the vertical profiles agree well—in particular, the level of maximum heating. The revised SLH algorithm was also applied to PR data for February 1998 and February 1999. The results are compared with heating profiles derived by the convective–stratiform heating (CSH) algorithm. Because observed information on precipitation depth is used in addition to precipitation type and intensity, differences between shallow and deep convection are more distinct in the SLH algorithm in comparison with the CSH algorithm.
Abstract
The spectral latent heating (SLH) algorithm was developed for the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) in Part I of this study. The method uses PR information [precipitation-top height (PTH), precipitation rates at the surface and melting level, and rain type] to select heating profiles from lookup tables. Heating-profile lookup tables for the three rain types—convective, shallow stratiform, and anvil rain (deep stratiform with a melting level)—were derived from numerical simulations of tropical cloud systems from the Tropical Ocean and Global Atmosphere Coupled Ocean–Atmosphere Response Experiment (TOGA COARE) utilizing a cloud-resolving model (CRM). To assess its global application to TRMM PR data, the universality of the lookup tables from the TOGA COARE simulations is examined in this paper. Heating profiles are reconstructed from CRM-simulated parameters (i.e., PTH, precipitation rates at the surface and melting level, and rain type) and are compared with the true CRM-simulated heating profiles, which are computed directly by the model thermodynamic equation. CRM-simulated data from the Global Atmospheric Research Program Atlantic Tropical Experiment (GATE), South China Sea Monsoon Experiment (SCSMEX), and Kwajalein Experiment (KWAJEX) are used as a consistency check. The consistency check reveals discrepancies between the SLH-reconstructed and Goddard Cumulus Ensemble (GCE)-simulated heating above the melting level in the convective region and at the melting level in the stratiform region that are attributable to the TOGA COARE table. Discrepancies in the convective region are due to differences in the vertical distribution of deep convective heating due to the relative importance of liquid and ice water processes, which varies from case to case. Discrepancies in the stratiform region are due to differences in the level separating upper-level heating and lower-level cooling. Based on these results, improvements were made to the SLH algorithm. Convective heating retrieval is now separated into upper-level heating due to ice processes and lower-level heating due to liquid water processes. In the stratiform region, the heating profile is shifted up or down by matching the melting level in the TOGA COARE lookup table with the observed one. Consistency checks indicate the revised SLH algorithm performs much better for both the convective and stratiform components than does the original one. The revised SLH algorithm was applied to PR data, and the results were compared with heating profiles derived diagnostically from SCSMEX sounding data. Key features of the vertical profiles agree well—in particular, the level of maximum heating. The revised SLH algorithm was also applied to PR data for February 1998 and February 1999. The results are compared with heating profiles derived by the convective–stratiform heating (CSH) algorithm. Because observed information on precipitation depth is used in addition to precipitation type and intensity, differences between shallow and deep convection are more distinct in the SLH algorithm in comparison with the CSH algorithm.
Abstract
An orographic/nonorographic rainfall classification scheme has been introduced for the operational algorithm of the Global Satellite Mapping of Precipitation (GSMaP) for passive microwave radiometers. However, problems of overestimations and false alarms of heavy orographic rainfall remain unresolved. This is because the current scheme selected lower constant thresholds of orographic rainfall conditions for global application and used values of orographically forced upward motion w derived from near-surface atmospheric data. This study improves the conceptual model of the warm-rain process for considering the strength of the upstream flow of the low-level troposphere. Under a weak upstream current, rain reaches the foothills of the windward mountain slope because of sufficient time for condensation and precipitation enhancement by the topography. Conversely, under a strong upstream current, precipitation enhancement occurs nearer to the mountain peak. This is because the upstream current flows so quickly that there is insufficient time for enhancement of precipitation over the foothills of the windward mountain slope. After implementing a variable threshold for w that depends on the mean horizontal low-level wind, the area of orographic enhancement of rain was detected reasonably well in cases of both strong and weak winds. To improve the accuracy of estimates of orographic rainfall, an adjustment to the rain estimation was introduced using a lower-frequency channel. The biases of the rainfall estimate for the adjusted scheme from the Tropical Rainfall Measuring Mission Precipitation Radar were improved for the cases considered here as well as for the Asian region of heavy orographic rainfall over land.
Abstract
An orographic/nonorographic rainfall classification scheme has been introduced for the operational algorithm of the Global Satellite Mapping of Precipitation (GSMaP) for passive microwave radiometers. However, problems of overestimations and false alarms of heavy orographic rainfall remain unresolved. This is because the current scheme selected lower constant thresholds of orographic rainfall conditions for global application and used values of orographically forced upward motion w derived from near-surface atmospheric data. This study improves the conceptual model of the warm-rain process for considering the strength of the upstream flow of the low-level troposphere. Under a weak upstream current, rain reaches the foothills of the windward mountain slope because of sufficient time for condensation and precipitation enhancement by the topography. Conversely, under a strong upstream current, precipitation enhancement occurs nearer to the mountain peak. This is because the upstream current flows so quickly that there is insufficient time for enhancement of precipitation over the foothills of the windward mountain slope. After implementing a variable threshold for w that depends on the mean horizontal low-level wind, the area of orographic enhancement of rain was detected reasonably well in cases of both strong and weak winds. To improve the accuracy of estimates of orographic rainfall, an adjustment to the rain estimation was introduced using a lower-frequency channel. The biases of the rainfall estimate for the adjusted scheme from the Tropical Rainfall Measuring Mission Precipitation Radar were improved for the cases considered here as well as for the Asian region of heavy orographic rainfall over land.
Abstract
The Dual-Frequency Precipitation Radar (DPR), which consists of a Ku-band precipitation radar (KuPR) and a Ka-band precipitation radar (KaPR) on board the GPM Core Observatory, cannot observe precipitation at low altitudes near the ground contaminated by surface clutter. This near-surface region is called the blind zone. DPR estimates the clutter-free bottom (CFB), which is the lowest altitude not included in the blind zone, and estimates precipitation at altitudes higher than the CFB. High CFBs, which are common over mountainous areas, represent obstacles to detection of shallow precipitation and estimation of low-level enhanced precipitation. We compared KuPR data with rain gauge data from Da-Tun Mountain of northern Taiwan acquired from March 2014 to February 2020. A total of 12 cases were identified in which the KuPR missed some rainfall with intensity of >10 mm h−1 that was observed by rain gauges. Comparison of KuPR profile and ground-based radar profile revealed that shallow precipitation in the KuPR blind zone was missed because the CFB was estimated to be higher than the lower bound of the range free from surface echoes. In the original operational algorithm, CFB was estimated using only the received power data of the KuPR. In this study, the CFB was identified by the sharp increase in the difference between the received powers of the KuPR and the KaPR at altitude affected by surface clutter. By lowering the CFB, the KuPR succeeded in detection and estimation of shallow precipitation.
Significance Statement
The Dual-Frequency Precipitation Radar (DPR) on board the GPM Core Observatory cannot capture precipitation in the low-altitude region near the ground contaminated by surface clutter. This region is called the blind zone. The DPR estimates the clutter-free bottom (CFB), which is the lower bound of the range free from surface echoes, and uses data higher than CFB. DPR consists of a Ku-band precipitation radar (KuPR) and a Ka-band precipitation radar (KaPR). KuPR missed some shallow precipitation more than 10 mm h−1 in the blind zone over Da-Tun Mountain of northern Taiwan because of misjudged CFB estimation. Using both the KuPR and the KaPR, we improved the CFB estimation algorithm, which lowered the CFB, narrowed the blind zone, and improved the capability to detect shallow precipitation.
Abstract
The Dual-Frequency Precipitation Radar (DPR), which consists of a Ku-band precipitation radar (KuPR) and a Ka-band precipitation radar (KaPR) on board the GPM Core Observatory, cannot observe precipitation at low altitudes near the ground contaminated by surface clutter. This near-surface region is called the blind zone. DPR estimates the clutter-free bottom (CFB), which is the lowest altitude not included in the blind zone, and estimates precipitation at altitudes higher than the CFB. High CFBs, which are common over mountainous areas, represent obstacles to detection of shallow precipitation and estimation of low-level enhanced precipitation. We compared KuPR data with rain gauge data from Da-Tun Mountain of northern Taiwan acquired from March 2014 to February 2020. A total of 12 cases were identified in which the KuPR missed some rainfall with intensity of >10 mm h−1 that was observed by rain gauges. Comparison of KuPR profile and ground-based radar profile revealed that shallow precipitation in the KuPR blind zone was missed because the CFB was estimated to be higher than the lower bound of the range free from surface echoes. In the original operational algorithm, CFB was estimated using only the received power data of the KuPR. In this study, the CFB was identified by the sharp increase in the difference between the received powers of the KuPR and the KaPR at altitude affected by surface clutter. By lowering the CFB, the KuPR succeeded in detection and estimation of shallow precipitation.
Significance Statement
The Dual-Frequency Precipitation Radar (DPR) on board the GPM Core Observatory cannot capture precipitation in the low-altitude region near the ground contaminated by surface clutter. This region is called the blind zone. The DPR estimates the clutter-free bottom (CFB), which is the lower bound of the range free from surface echoes, and uses data higher than CFB. DPR consists of a Ku-band precipitation radar (KuPR) and a Ka-band precipitation radar (KaPR). KuPR missed some shallow precipitation more than 10 mm h−1 in the blind zone over Da-Tun Mountain of northern Taiwan because of misjudged CFB estimation. Using both the KuPR and the KaPR, we improved the CFB estimation algorithm, which lowered the CFB, narrowed the blind zone, and improved the capability to detect shallow precipitation.
Abstract
An algorithm, the spectral latent heating (SLH) algorithm, has been developed to estimate latent heating profiles for the Tropical Rainfall Measuring Mission precipitation radar with a cloud-resolving model (CRM). Heating-profile lookup tables for the three rain types—convective, shallow stratiform, and anvil rain (deep stratiform with a melting level)—were produced with numerical simulations of tropical cloud systems in the Tropical Ocean and Global Atmosphere Coupled Ocean–Atmosphere Response Experiment. For convective and shallow stratiform regions, the lookup table refers to the precipitation-top height (PTH). For the anvil region, on the other hand, the lookup table refers to the precipitation rate at the melting level instead of PTH. A consistency check of the SLH algorithm was also done with the CRM-simulated outputs. The first advantage of this algorithm is that differences of heating profiles between the shallow convective stage and the deep convective stage can be retrieved. This is a result of the utilization of observed information, not only on precipitation type and intensity, but also on the precipitation depth. The second advantage is that heating profiles in the decaying stage with no surface rain can also be retrieved. This comes from utilization of the precipitation rate at the melting level for anvil regions.
Abstract
An algorithm, the spectral latent heating (SLH) algorithm, has been developed to estimate latent heating profiles for the Tropical Rainfall Measuring Mission precipitation radar with a cloud-resolving model (CRM). Heating-profile lookup tables for the three rain types—convective, shallow stratiform, and anvil rain (deep stratiform with a melting level)—were produced with numerical simulations of tropical cloud systems in the Tropical Ocean and Global Atmosphere Coupled Ocean–Atmosphere Response Experiment. For convective and shallow stratiform regions, the lookup table refers to the precipitation-top height (PTH). For the anvil region, on the other hand, the lookup table refers to the precipitation rate at the melting level instead of PTH. A consistency check of the SLH algorithm was also done with the CRM-simulated outputs. The first advantage of this algorithm is that differences of heating profiles between the shallow convective stage and the deep convective stage can be retrieved. This is a result of the utilization of observed information, not only on precipitation type and intensity, but also on the precipitation depth. The second advantage is that heating profiles in the decaying stage with no surface rain can also be retrieved. This comes from utilization of the precipitation rate at the melting level for anvil regions.
Abstract
Observations of the Tropical Rainfall Measuring Mission Precipitation Radar (TRMM PR) over 16 yr yielded hundreds of large precipitation systems (≥100 km) for each 0.1° grid over major rainy regions. More than 90% of the rainfall was attributed to large systems over certain midlatitude regions such as La Plata basin and the East China Sea. The accumulation of high-impact snapshots reduced the significant spatial fluctuation of the rain fraction arising from large systems and allowed the obtaining of sharp images of the geographic rainfall pattern. Widespread systems were undetected over low-rainfall areas such as regions off Peru. Conversely, infrequent large systems brought a significant percentage of rainfall over semiarid tropics such as the Sahel. This demonstrated an increased need for regional sampling of extreme phenomena. Differences in data collected over a period of 16 yr were used to examine sampling adequacy. The results indicated that more than 10% of the 0.1°-scale sampling error accounted for half of the TRMM domain even for a 10-yr data accumulation period. Rainfall at the 0.1° scale was negatively biased in the first few years for over more than half of the areas because of a lack of high-impact samples. The areal fraction of the 0.1°-scale climatology with a 50% accuracy exceeded 95% in the ninth year and in the fifth year for those areas with rainfall >2 mm day−1. A monotonic increase in the degree of similarity of finescale rainfall to the best estimate with an accuracy of 10% illustrated the need for further sampling.
Abstract
Observations of the Tropical Rainfall Measuring Mission Precipitation Radar (TRMM PR) over 16 yr yielded hundreds of large precipitation systems (≥100 km) for each 0.1° grid over major rainy regions. More than 90% of the rainfall was attributed to large systems over certain midlatitude regions such as La Plata basin and the East China Sea. The accumulation of high-impact snapshots reduced the significant spatial fluctuation of the rain fraction arising from large systems and allowed the obtaining of sharp images of the geographic rainfall pattern. Widespread systems were undetected over low-rainfall areas such as regions off Peru. Conversely, infrequent large systems brought a significant percentage of rainfall over semiarid tropics such as the Sahel. This demonstrated an increased need for regional sampling of extreme phenomena. Differences in data collected over a period of 16 yr were used to examine sampling adequacy. The results indicated that more than 10% of the 0.1°-scale sampling error accounted for half of the TRMM domain even for a 10-yr data accumulation period. Rainfall at the 0.1° scale was negatively biased in the first few years for over more than half of the areas because of a lack of high-impact samples. The areal fraction of the 0.1°-scale climatology with a 50% accuracy exceeded 95% in the ninth year and in the fifth year for those areas with rainfall >2 mm day−1. A monotonic increase in the degree of similarity of finescale rainfall to the best estimate with an accuracy of 10% illustrated the need for further sampling.
