The Land/Sea Breeze Experiment (LASBEX) was conducted at Moss Landing, California, 15–30 September 1987. The experiment was designed to study the vertical structure and mesoscale variation of the land/sea breeze. A Doppler lidar, a triangular array of three sodars, two sounding systems (one deployed from land and one from a ship), and six surface weather stations (one shipborne) were sited around the Moss Landing area. Measurements obtained included ten sea-breeze and four land-breeze events. This paper describes the objectives and design of the experiment, as well as the observing systems that were used. Some preliminary results and selected observations are presented, called from the data collected, as well as the ensuing analysis plans.

During the summer of 1989, the Forecast Systems Laboratory of the National Oceanic and Atmospheric Administration sponsored an evaluation of artificial-intelligence-based systems that forecast severe convective storms. The evaluation experiment, called Shootout-89, took place in Boulder, Colorado, and focused on storms over the northeastern Colorado foothills and plains.

Six systems participated in Shootout-89: three traditional expert systems, a hybrid system including a linear model augmented by a small expert system, an analogue-based system, and a system developed using methods from the cognitive science/judgment analysis tradition.

Each day of the exercise, the systems generated 2–9-h forecasts of the probabilities of occurrence of nonsignificant weather, significant weather, and severe weather in each of four regions in northeastern Colorado. A verification coordinator working at the Denver Weather Service Forecast Office gathered ground-truth data from a network of observers.

The systems were evaluated on several measures of forecast skill, on timeliness, on ease of learning, and on ease of use. They were generally easy to operate; however, they required substantially different levels of meteorological expertise on the part of their users, reflecting the various operational environments for which they had been designed. The systems varied in their statistical behavior, but on this difficult forecast problem, they generally showed a skill approximately equal to that of persistence forecasts and climatological forecasts.

Abstract

A detailed understanding of interactions of aerosols, cloud droplets/ice crystals, and trace gases within the atmosphere is of prime importance for an accurate understanding of Earth’s weather and climate. One aspect that remains especially vexing is that clouds are ubiquitously turbulent, and therefore thermodynamic and compositional variables, such as water vapor supersaturation, fluctuate in space and time. With these problems in mind, a multiphase, turbulent reaction chamber—called the Π chamber because of the internal volume of 3.14 m³ with the cylindrical insert installed—has been developed. It is capable of pressures ranging from 1,000 to –60 hPa and can sustain temperatures of –55° to 55°C, thereby spanning much of the range of tropospheric clouds. To control the relative humidity in the chamber, it can be operated with a stable, unstable, or neutral temperature difference between the top and bottom surfaces, with or without expansion. A negative temperature difference induces turbulent Rayleigh–Bénard convection and associated supersaturation generation through isobaric mixing. Supporting instrumentation includes a suite of aerosol generation and characterization techniques; temperature, pressure, and humidity sensors; and a phase Doppler interferometer. Initial characterization experiments demonstrate the ability to sustain steady-state turbulent cloud conditions for times greater than 1 day, with droplet diameters typically in the range of 5–40 µm. Typical turbulence has root-mean-square velocity fluctuations on the order of 10 cm s^–1 and kinetic energy dissipation rates of 1 × 10^–3 W kg^–1.

From 6 January to 28 February 1993, the second phase of the Pilot Radiation Observation Experiment (PROBE) was conducted in Kavieng, Papua New Guinea. Routine data taken during PROBE included radiosondes released every 6 h and 915-MHz Wind Profiler–Radio Acoustic Sounding System (RASS) observations of winds and temperatures. In addition, a dual-channel Microwave Water Substance Radiometer (MWSR) at 23.87 and 31.65 GHz and a Fourier Transform Infrared Radiometer (FTIR) were operated. The FTIR operated between 500 and 2000 cm⁻¹ and measured some of the first high spectral resolution (1 cm⁻¹) radiation data taken in the Tropics. The microwave radiometer provided continuous measurements within 30-s resolution of precipitable water vapor (PWV) and integrated cloud liquid, while the RASS measured virtual temperature profiles every 30 min. In addition, occasional lidar soundings of cloud-base heights were available. The MWSR and FTIR data taken during PROBE were compared with radiosonde data. Significant differences were noted between the MWSR and the radiosonde observations of PWV. The probability distribution of cloud liquid water was derived and is consistent with a lognormal distribution. During conditions that the MWSR did not indicate the presence of cloud liquid water, broadband long- and shortwave irradiance data were used to identify the presence of cirrus clouds or to confirm the presence of clear conditions. Comparisons are presented between measured and calculated radiance during clear conditions, using radiosonde data as input to a line-by-line Radiative Transfer Model. A case study is given of a drying event in which the PWV dropped from about 5.5 cm to a low of 3.8 cm during a 24-h period. The observations during the drying event are interpreted using PWV images obtained from data from the Defense Meteorological Satellite Program/Special Sensor Microwave/Imager and of horizontal flow measured by the wind profiler. The broadband irradiance data and the RASS soundings were also examined during the drying event.

A boundary layer field experiment in the Mexico City basin during the period 24 February–22 March 1997 is described. A total of six sites were instrumented. At four of the sites, 915-MHz radar wind profilers were deployed and radiosondes were released five times per day. Two of these sites also had sodars collocated with the profilers. Radiosondes were released twice per day at a fifth site to the south of the basin, and rawinsondes were flown from another location to the northeast of the city three times per day. Mixed layers grew to depths of 2500–3500 m, with a rapid period of growth beginning shortly before noon and lasting for several hours. Significant differences between the mixed-layer temperatures in the basin and outside the basin were observed. Three thermally and topographically driven flow patterns were observed that are consistent with previously hypothesized topographical and thermal forcing mechanisms. Despite these features, the circulation patterns in the basin important for the transport and diffusion of air pollutants show less day-to-day regularity than had been anticipated on the basis of Mexico City's tropical location, high altitude and strong insolation, and topographical setting.

A field campaign was carried out near Boardman, Oregon, to study the effects of subgrid-scale variability of sensible- and latent-heat fluxes on surface boundary-layer properties. The experiment involved three U.S. Department of Energy laboratories, one National Oceanic and Atmospheric Administration laboratory, and several universities. The experiment was conducted in a region of severe contrasts in adjacent surface types that accentuated the response of the atmosphere to variable surface forcing. Large values of sensible-heat flux and low values of latent-heat flux characterized a sagebrush steppe area; significantly smaller sensible-heat fluxes and much larger latent-heat fluxes were associated with extensive tracts of irrigated farmland to the north, east, and west of the steppe. Data were obtained from an array of surface flux stations, remote-sensing devices, an instrumented aircraft, and soil and vegetation measurements. The data will be used to address the problem of extrapolating from a limited number of local measurements to area-averaged values of fluxes suitable for use in global climate models.

Abstract

The Lake Michigan Ozone Study 2017 (LMOS 2017) was a collaborative multiagency field study targeting ozone chemistry, meteorology, and air quality observations in the southern Lake Michigan area. The primary objective of LMOS 2017 was to provide measurements to improve air quality modeling of the complex meteorological and chemical environment in the region. LMOS 2017 science questions included spatiotemporal assessment of nitrogen oxides (NO _x = NO + NO₂) and volatile organic compounds (VOC) emission sources and their influence on ozone episodes; the role of lake breezes; contribution of new remote sensing tools such as GeoTASO, Pandora, and TEMPO to air quality management; and evaluation of photochemical grid models. The observing strategy included GeoTASO on board the NASA UC-12 aircraft capturing NO₂ and formaldehyde columns, an in situ profiling aircraft, two ground-based coastal enhanced monitoring locations, continuous NO₂ columns from coastal Pandora instruments, and an instrumented research vessel. Local photochemical ozone production was observed on 2 June, 9–12 June, and 14–16 June, providing insights on the processes relevant to state and federal air quality management. The LMOS 2017 aircraft mapped significant spatial and temporal variation of NO₂ emissions as well as polluted layers with rapid ozone formation occurring in a shallow layer near the Lake Michigan surface. Meteorological characteristics of the lake breeze were observed in detail and measurements of ozone, NO_x, nitric acid, hydrogen peroxide, VOC, oxygenated VOC (OVOC), and fine particulate matter (PM_2.5) composition were conducted. This article summarizes the study design, directs readers to the campaign data repository, and presents a summary of findings.

Abstract

To assess current capabilities for measuring flow within the atmospheric boundary layer, including within wind farms, the U.S. Department of Energy sponsored the eXperimental Planetary boundary layer Instrumentation Assessment (XPIA) campaign at the Boulder Atmospheric Observatory (BAO) in spring 2015. Herein, we summarize the XPIA field experiment, highlight novel measurement approaches, and quantify uncertainties associated with these measurement methods. Line-of-sight velocities measured by scanning lidars and radars exhibit close agreement with tower measurements, despite differences in measurement volumes. Virtual towers of wind measurements, from multiple lidars or radars, also agree well with tower and profiling lidar measurements. Estimates of winds over volumes from scanning lidars and radars are in close agreement, enabling the assessment of spatial variability. Strengths of the radar systems used here include high scan rates, large domain coverage, and availability during most precipitation events, but they struggle at times to provide data during periods with limited atmospheric scatterers. In contrast, for the deployment geometry tested here, the lidars have slower scan rates and less range but provide more data during nonprecipitating atmospheric conditions. Microwave radiometers provide temperature profiles with approximately the same uncertainty as radio acoustic sounding systems (RASS). Using a motion platform, we assess motion-compensation algorithms for lidars to be mounted on offshore platforms. Finally, we highlight cases for validation of mesoscale or large-eddy simulations, providing information on accessing the archived dataset. We conclude that modern remote sensing systems provide a generational improvement in observational capabilities, enabling the resolution of finescale processes critical to understanding inhomogeneous boundary layer flows.