Search Results
You are looking at 1 - 4 of 4 items for :
- Author or Editor: S. Barnard x
- Bulletin of the American Meteorological Society x
- Refine by Access: Content accessible to me x
Many of the clouds important to the Earth's energy balance, from the Tropics to the Arctic, contain small amounts of liquid water. Longwave and shortwave radiative fluxes are very sensitive to small perturbations of the cloud liquid water path (LWP), when the LWP is small (i.e., < 100 g m−2; clouds with LWP less than this threshold will be referred to as “thin”). Thus, the radiative properties of these thin liquid water clouds must be well understood to capture them correctly in climate models. We review the importance of these thin clouds to the Earth's energy balance, and explain the difficulties in observing them. In particular, because these clouds are thin, potentially mixed phase, and often broken (i.e., have large 3D variability), it is challenging to retrieve their microphysical properties accurately. We describe a retrieval algorithm intercomparison that was conducted to evaluate the issues involved. The intercomparison used data collected at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site and included 18 different algorithms to evaluate their retrieved LWP, optical depth, and effective radii. Surprisingly, evaluation of the simplest case, a single-layer overcast stratocumulus, revealed that huge discrepancies exist among the various techniques, even among different algorithms that are in the same general classification. This suggests that, despite considerable advances that have occurred in the field, much more work must be done, and we discuss potential avenues for future research.)
Many of the clouds important to the Earth's energy balance, from the Tropics to the Arctic, contain small amounts of liquid water. Longwave and shortwave radiative fluxes are very sensitive to small perturbations of the cloud liquid water path (LWP), when the LWP is small (i.e., < 100 g m−2; clouds with LWP less than this threshold will be referred to as “thin”). Thus, the radiative properties of these thin liquid water clouds must be well understood to capture them correctly in climate models. We review the importance of these thin clouds to the Earth's energy balance, and explain the difficulties in observing them. In particular, because these clouds are thin, potentially mixed phase, and often broken (i.e., have large 3D variability), it is challenging to retrieve their microphysical properties accurately. We describe a retrieval algorithm intercomparison that was conducted to evaluate the issues involved. The intercomparison used data collected at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site and included 18 different algorithms to evaluate their retrieved LWP, optical depth, and effective radii. Surprisingly, evaluation of the simplest case, a single-layer overcast stratocumulus, revealed that huge discrepancies exist among the various techniques, even among different algorithms that are in the same general classification. This suggests that, despite considerable advances that have occurred in the field, much more work must be done, and we discuss potential avenues for future research.)
The Arm Program's Water Vapor Intensive Observation Periods
Overview, Initial Accomplishments, and Future Challenges
A series of water vapor intensive observation periods (WVIOPs) were conducted at the Atmospheric Radiation Measurement (ARM) site in Oklahoma between 1996 and 2000. The goals of these WVIOPs are to characterize the accuracy of the operational water vapor observations and to develop techniques to improve the accuracy of these measurements.
The initial focus of these experiments was on the lower atmosphere, for which the goal is an absolute accuracy of better than 2% in total column water vapor, corresponding to ~1 W m−2 of infrared radiation at the surface. To complement the operational water vapor instruments during the WVIOPs, additional instrumentation including a scanning Raman lidar, microwave radiometers, chilled-mirror hygrometers, a differential absorption lidar, and ground-based solar radiometers were deployed at the ARM site. The unique datasets from the 1996, 1997, and 1999 experiments have led to many results, including the discovery and characterization of a large (> 25%) sonde-to-sonde variability in the water vapor profiles from Vaisala RS-80H radiosondes that acts like a height-independent calibration factor error. However, the microwave observations provide a stable reference that can be used to remove a large part of the sonde-to-sonde calibration variability. In situ capacitive water vapor sensors demonstrated agreement within 2% of chilled-mirror hygrometers at the surface and on an instrumented tower. Water vapor profiles retrieved from two Raman lidars, which have both been calibrated to the ARM microwave radiometer, showed agreement to within 5% for all altitudes below 8 km during two WVIOPs. The mean agreement of the total precipitable water vapor from different techniques has converged significantly from early analysis that originally showed differences up to 15%. Retrievals of total precipitable water vapor (PWV) from the ARM microwave radiometer are now found to be only 3% moister than PWV derived from new GPS results, and about 2% drier than the mean of radiosonde data after a recently defined sonde dry-bias correction is applied. Raman lidar profiles calibrated using tower-mounted chilled-mirror hygrometers confirm the expected sensitivity of microwave radiometer data to water vapor changes, but it is drier than the microwave radiometer (MWR) by 0.95 mm for all PWV amounts. However, observations from different collocated microwave radiometers have shown larger differences than expected and attempts to resolve the remaining inconsistencies (in both calibration and forward modeling) are continuing.
The paper concludes by outlining the objectives of the recent 2000 WVIOP and the ARM–First International Satellite Cloud Climatology Project (ISCCP) Regional Experiment (FIRE) Water Vapor Experiment (AFWEX), the latter of which switched the focus to characterizing upper-tropospheric humidity measurements.
A series of water vapor intensive observation periods (WVIOPs) were conducted at the Atmospheric Radiation Measurement (ARM) site in Oklahoma between 1996 and 2000. The goals of these WVIOPs are to characterize the accuracy of the operational water vapor observations and to develop techniques to improve the accuracy of these measurements.
The initial focus of these experiments was on the lower atmosphere, for which the goal is an absolute accuracy of better than 2% in total column water vapor, corresponding to ~1 W m−2 of infrared radiation at the surface. To complement the operational water vapor instruments during the WVIOPs, additional instrumentation including a scanning Raman lidar, microwave radiometers, chilled-mirror hygrometers, a differential absorption lidar, and ground-based solar radiometers were deployed at the ARM site. The unique datasets from the 1996, 1997, and 1999 experiments have led to many results, including the discovery and characterization of a large (> 25%) sonde-to-sonde variability in the water vapor profiles from Vaisala RS-80H radiosondes that acts like a height-independent calibration factor error. However, the microwave observations provide a stable reference that can be used to remove a large part of the sonde-to-sonde calibration variability. In situ capacitive water vapor sensors demonstrated agreement within 2% of chilled-mirror hygrometers at the surface and on an instrumented tower. Water vapor profiles retrieved from two Raman lidars, which have both been calibrated to the ARM microwave radiometer, showed agreement to within 5% for all altitudes below 8 km during two WVIOPs. The mean agreement of the total precipitable water vapor from different techniques has converged significantly from early analysis that originally showed differences up to 15%. Retrievals of total precipitable water vapor (PWV) from the ARM microwave radiometer are now found to be only 3% moister than PWV derived from new GPS results, and about 2% drier than the mean of radiosonde data after a recently defined sonde dry-bias correction is applied. Raman lidar profiles calibrated using tower-mounted chilled-mirror hygrometers confirm the expected sensitivity of microwave radiometer data to water vapor changes, but it is drier than the microwave radiometer (MWR) by 0.95 mm for all PWV amounts. However, observations from different collocated microwave radiometers have shown larger differences than expected and attempts to resolve the remaining inconsistencies (in both calibration and forward modeling) are continuing.
The paper concludes by outlining the objectives of the recent 2000 WVIOP and the ARM–First International Satellite Cloud Climatology Project (ISCCP) Regional Experiment (FIRE) Water Vapor Experiment (AFWEX), the latter of which switched the focus to characterizing upper-tropospheric humidity measurements.
Drought-stricken areas of Central America and Mexico were victimized in 1998 by forest and brush fires that burned out of control during much of the first half of the year. Wind currents at various times during the episode helped transport smoke from these fires over the Gulf of Mexico and into portions of the United States. Visibilities were greatly reduced during favorable flow periods from New Mexico to south Florida and northward to Wisconsin as a result of this smoke and haze. In response to the reduced visibilities and increased pollutants, public health advisories and information statements were issued by various agencies in Gulf Coast states and in Oklahoma.
This event was also detected by a unique array of instrumentation deployed at the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) program Southern Great Plains Cloud and Radiation Testbed and by sensors of the Oklahoma Department of Environmental Quality/Air Quality Division. Observations from these measurement devices suggest elevated levels of aerosol loading and ozone concentrations during May 1998 when prevailing winds were favorable for the transport of the Central American smoke pall into Oklahoma and Kansas. In particular, aerosol extinction profiles derived from the ARM Raman lidar measurements revealed large variations in the vertical distribution of the smoke.
Drought-stricken areas of Central America and Mexico were victimized in 1998 by forest and brush fires that burned out of control during much of the first half of the year. Wind currents at various times during the episode helped transport smoke from these fires over the Gulf of Mexico and into portions of the United States. Visibilities were greatly reduced during favorable flow periods from New Mexico to south Florida and northward to Wisconsin as a result of this smoke and haze. In response to the reduced visibilities and increased pollutants, public health advisories and information statements were issued by various agencies in Gulf Coast states and in Oklahoma.
This event was also detected by a unique array of instrumentation deployed at the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) program Southern Great Plains Cloud and Radiation Testbed and by sensors of the Oklahoma Department of Environmental Quality/Air Quality Division. Observations from these measurement devices suggest elevated levels of aerosol loading and ozone concentrations during May 1998 when prevailing winds were favorable for the transport of the Central American smoke pall into Oklahoma and Kansas. In particular, aerosol extinction profiles derived from the ARM Raman lidar measurements revealed large variations in the vertical distribution of the smoke.
Abstract
Advanced Quantitative Precipitation Information (AQPI) is a synergistic project that combines observations and models to improve monitoring and forecasts of precipitation, streamflow, and coastal flooding in the San Francisco Bay area. As an experimental system, AQPI leverages more than a decade of research, innovation, and implementation of a statewide, state-of-the-art network of observations, and development of the next generation of weather and coastal forecast models. AQPI was developed as a prototype in response to requests from the water management community for improved information on precipitation, riverine, and coastal conditions to inform their decision making processes. Observation of precipitation in the complex Bay Area landscape of California’s coastal mountain ranges is known to be a challenging problem. But, with new advanced radar network techniques, AQPI is helping fill an important observational gap for this highly populated and vulnerable metropolitan area. The prototype AQPI system consists of improved weather radar data for precipitation estimation; additional surface measurements of precipitation, streamflow and soil moisture; and a suite of integrated forecast modeling systems to improve situational awareness about current and future water conditions from sky to sea. Together these tools will help improve emergency preparedness and public response to prevent loss of life and destruction of property during extreme storms accompanied by heavy precipitation and high coastal water levels - especially high-moisture laden atmospheric rivers. The Bay Area AQPI system could potentially be replicated in other urban regions in California, the United States, and world-wide.
Abstract
Advanced Quantitative Precipitation Information (AQPI) is a synergistic project that combines observations and models to improve monitoring and forecasts of precipitation, streamflow, and coastal flooding in the San Francisco Bay area. As an experimental system, AQPI leverages more than a decade of research, innovation, and implementation of a statewide, state-of-the-art network of observations, and development of the next generation of weather and coastal forecast models. AQPI was developed as a prototype in response to requests from the water management community for improved information on precipitation, riverine, and coastal conditions to inform their decision making processes. Observation of precipitation in the complex Bay Area landscape of California’s coastal mountain ranges is known to be a challenging problem. But, with new advanced radar network techniques, AQPI is helping fill an important observational gap for this highly populated and vulnerable metropolitan area. The prototype AQPI system consists of improved weather radar data for precipitation estimation; additional surface measurements of precipitation, streamflow and soil moisture; and a suite of integrated forecast modeling systems to improve situational awareness about current and future water conditions from sky to sea. Together these tools will help improve emergency preparedness and public response to prevent loss of life and destruction of property during extreme storms accompanied by heavy precipitation and high coastal water levels - especially high-moisture laden atmospheric rivers. The Bay Area AQPI system could potentially be replicated in other urban regions in California, the United States, and world-wide.
