Search Results
You are looking at 1 - 6 of 6 items for
- Author or Editor: Ulrich Corsmeier x
- Refine by Access: Content accessible to me x
Abstract
Damaging gusts in windstorms are represented by crude subgrid-scale parameterizations in today’s weather and climate models. This limitation motivated the Wind and Storms Experiment (WASTEX) in winter 2016–17 in the Upper Rhine Valley over southwestern Germany. Gusts recorded at an instrumented tower during the passage of extratropical cyclone “Thomas” on 23 February 2017 are investigated based on measurements of radial wind with ≈70-m along-beam spacing from a fast-scanning Doppler lidar and realistic large-eddy simulations with grid spacings down to 78 m using the Icosahedral Nonhydrostatic model. Four wind peaks occur due to the storm onset, the cold front, a precipitation line, and isolated showers. The first peak is related to a sudden drop in dewpoint and results from the downward mixing of a low-level jet and a dry layer within the warm sector characterized by extremely high temperatures for the season. While operational convection-permitting forecasts poorly predict the storm onset overall, a successful ensemble member highlights the role of upstream orography. Lidar observations reveal the presence of long-lasting wind structures that result from a combination of convection- and shear-driven instability. Large-eddy simulations contain structures elongated in the wind direction that are qualitatively similar but too coarse compared to the observed ones. Their size is found to exceed the effective model resolution by one order of magnitude due to their elongation. These results emphasize the need for subkilometer-scale measuring and modeling systems to improve the representation of gusts in windstorms.
Abstract
Damaging gusts in windstorms are represented by crude subgrid-scale parameterizations in today’s weather and climate models. This limitation motivated the Wind and Storms Experiment (WASTEX) in winter 2016–17 in the Upper Rhine Valley over southwestern Germany. Gusts recorded at an instrumented tower during the passage of extratropical cyclone “Thomas” on 23 February 2017 are investigated based on measurements of radial wind with ≈70-m along-beam spacing from a fast-scanning Doppler lidar and realistic large-eddy simulations with grid spacings down to 78 m using the Icosahedral Nonhydrostatic model. Four wind peaks occur due to the storm onset, the cold front, a precipitation line, and isolated showers. The first peak is related to a sudden drop in dewpoint and results from the downward mixing of a low-level jet and a dry layer within the warm sector characterized by extremely high temperatures for the season. While operational convection-permitting forecasts poorly predict the storm onset overall, a successful ensemble member highlights the role of upstream orography. Lidar observations reveal the presence of long-lasting wind structures that result from a combination of convection- and shear-driven instability. Large-eddy simulations contain structures elongated in the wind direction that are qualitatively similar but too coarse compared to the observed ones. Their size is found to exceed the effective model resolution by one order of magnitude due to their elongation. These results emphasize the need for subkilometer-scale measuring and modeling systems to improve the representation of gusts in windstorms.
Abstract
While the exchange of mass, momentum, moisture, and energy over horizontally homogeneous, flat terrain is mostly driven by vertical turbulent mixing, thermally and dynamically driven mesoscale flows substantially contribute to the Earth–atmosphere exchange in the atmospheric boundary layer over mountainous terrain (MoBL). The interaction of these processes acting on multiple scales leads to a large spatial variability in the MoBL, whose observational detection requires comprehensive instrumentation and a sophisticated measurement strategy. We designed a field campaign that targets the three-dimensional flow structure and its impact on the MoBL in a major Alpine valley. Taking advantage of an existing network of surface flux towers and remote sensing instrumentation in the Inn Valley, Austria, we added a set of ground-based remote sensing instruments, consisting of Doppler lidars, a ceilometer, a Raman lidar, and a microwave radiometer, and performed radio soundings and aircraft measurements. The objective of the Cross-Valley Flow in the Inn Valley Investigated by Dual-Doppler Lidar Measurements (CROSSINN) experiment is to determine the mean and turbulent characteristics of the flow in the MoBL under different synoptic conditions and to provide an intensive dataset for the future validation of mesoscale and large-eddy simulations. A particular challenge is capturing the two-dimensional kinematic flow in a vertical plane across the whole valley using coplanar synchronized Doppler lidar scans, which allows the detection of cross-valley circulation cells. This article outlines the scientific objectives, instrument setup, measurement strategy, and available data; summarizes the synoptic conditions during the measurement period of 2.5 months; and presents first results.
Abstract
While the exchange of mass, momentum, moisture, and energy over horizontally homogeneous, flat terrain is mostly driven by vertical turbulent mixing, thermally and dynamically driven mesoscale flows substantially contribute to the Earth–atmosphere exchange in the atmospheric boundary layer over mountainous terrain (MoBL). The interaction of these processes acting on multiple scales leads to a large spatial variability in the MoBL, whose observational detection requires comprehensive instrumentation and a sophisticated measurement strategy. We designed a field campaign that targets the three-dimensional flow structure and its impact on the MoBL in a major Alpine valley. Taking advantage of an existing network of surface flux towers and remote sensing instrumentation in the Inn Valley, Austria, we added a set of ground-based remote sensing instruments, consisting of Doppler lidars, a ceilometer, a Raman lidar, and a microwave radiometer, and performed radio soundings and aircraft measurements. The objective of the Cross-Valley Flow in the Inn Valley Investigated by Dual-Doppler Lidar Measurements (CROSSINN) experiment is to determine the mean and turbulent characteristics of the flow in the MoBL under different synoptic conditions and to provide an intensive dataset for the future validation of mesoscale and large-eddy simulations. A particular challenge is capturing the two-dimensional kinematic flow in a vertical plane across the whole valley using coplanar synchronized Doppler lidar scans, which allows the detection of cross-valley circulation cells. This article outlines the scientific objectives, instrument setup, measurement strategy, and available data; summarizes the synoptic conditions during the measurement period of 2.5 months; and presents first results.
Abstract
Measurements of a convective storm cluster in the northern Black Forest in southwest Germany have revealed the development of a warm and dry downdraft under its anvil cloud that had an inhibiting effect on the subsequent development of convection. These measurements were made on 12 July 2006 as part of the field campaign Prediction, Identification and Tracking of Convective Cells (PRINCE) during which a number of new measurement strategies were deployed. These included the collocation of a rotational Raman lidar and a Doppler lidar on the summit of the highest mountain in the region (1164 m MSL) as well as the deployment of teams carrying radiosondes to be released in the vicinity of convective storms. In addition, an aircraft equipped with sensors for meteorological variables and dropsondes was in operation and determined that the downdraft air was approximately 1.5 K warmer, 4 g kg−1 drier, and therefore 3 g m−3 less dense than the air at the same altitude in the storm’s surroundings. The Raman lidar detected undulating aerosol-rich layers in the preconvective environment and a gradual warming trend of the lower troposphere as the nearby storm system evolved. The Doppler lidar both detected a pattern of convergent radial winds under a developing convective updraft and an outflow emerging under the storm’s anvil cloud. The dryness of the downdraft air indicates that it had subsided from higher altitudes. Its low density reveals that its development was not caused by negative thermal buoyancy, but was rather due to the vertical mass flux balance accompanying the storm’s updrafts.
Abstract
Measurements of a convective storm cluster in the northern Black Forest in southwest Germany have revealed the development of a warm and dry downdraft under its anvil cloud that had an inhibiting effect on the subsequent development of convection. These measurements were made on 12 July 2006 as part of the field campaign Prediction, Identification and Tracking of Convective Cells (PRINCE) during which a number of new measurement strategies were deployed. These included the collocation of a rotational Raman lidar and a Doppler lidar on the summit of the highest mountain in the region (1164 m MSL) as well as the deployment of teams carrying radiosondes to be released in the vicinity of convective storms. In addition, an aircraft equipped with sensors for meteorological variables and dropsondes was in operation and determined that the downdraft air was approximately 1.5 K warmer, 4 g kg−1 drier, and therefore 3 g m−3 less dense than the air at the same altitude in the storm’s surroundings. The Raman lidar detected undulating aerosol-rich layers in the preconvective environment and a gradual warming trend of the lower troposphere as the nearby storm system evolved. The Doppler lidar both detected a pattern of convergent radial winds under a developing convective updraft and an outflow emerging under the storm’s anvil cloud. The dryness of the downdraft air indicates that it had subsided from higher altitudes. Its low density reveals that its development was not caused by negative thermal buoyancy, but was rather due to the vertical mass flux balance accompanying the storm’s updrafts.
The Mediterranean region is frequently affected by heavy precipitation events associated with flash floods, landslides, and mudslides that cause hundreds of millions of euros in damages per year and, often, casualties. A major field campaign was devoted to heavy precipitation and f lash f loods from 5 September to 6 November 2012 within the framework of the 10-yr international Hydrological Cycle in the Mediterranean Experiment (HyMeX) dedicated to the hydrological cycle and related high-impact events. The 2-month field campaign took place over the northwestern Mediterranean Sea and its surrounding coastal regions in France, Italy, and Spain. The observation strategy of the field experiment was devised to improve knowledge of the following key components leading to heavy precipitation and flash flooding in the region: 1) the marine atmospheric f lows that transport moist and conditionally unstable air toward the coasts, 2) the Mediterranean Sea acting as a moisture and energy source, 3) the dynamics and microphysics of the convective systems producing heavy precipitation, and 4) the hydrological processes during flash floods. This article provides the rationale for developing this first HyMeX field experiment and an overview of its design and execution. Highlights of some intensive observation periods illustrate the potential of the unique datasets collected for process understanding, model improvement, and data assimilation.
The Mediterranean region is frequently affected by heavy precipitation events associated with flash floods, landslides, and mudslides that cause hundreds of millions of euros in damages per year and, often, casualties. A major field campaign was devoted to heavy precipitation and f lash f loods from 5 September to 6 November 2012 within the framework of the 10-yr international Hydrological Cycle in the Mediterranean Experiment (HyMeX) dedicated to the hydrological cycle and related high-impact events. The 2-month field campaign took place over the northwestern Mediterranean Sea and its surrounding coastal regions in France, Italy, and Spain. The observation strategy of the field experiment was devised to improve knowledge of the following key components leading to heavy precipitation and flash flooding in the region: 1) the marine atmospheric f lows that transport moist and conditionally unstable air toward the coasts, 2) the Mediterranean Sea acting as a moisture and energy source, 3) the dynamics and microphysics of the convective systems producing heavy precipitation, and 4) the hydrological processes during flash floods. This article provides the rationale for developing this first HyMeX field experiment and an overview of its design and execution. Highlights of some intensive observation periods illustrate the potential of the unique datasets collected for process understanding, model improvement, and data assimilation.
The Convective Storm Initiation Project (CSIP) is an international project to understand precisely where, when, and how convective clouds form and develop into showers in the mainly maritime environment of southern England. A major aim of CSIP is to compare the results of the very high resolution Met Office weather forecasting model with detailed observations of the early stages of convective clouds and to use the newly gained understanding to improve the predictions of the model.
A large array of ground-based instruments plus two instrumented aircraft, from the U.K. National Centre for Atmospheric Science (NCAS) and the German Institute for Meteorology and Climate Research (IMK), Karlsruhe, were deployed in southern England, over an area centered on the meteorological radars at Chilbolton, during the summers of 2004 and 2005. In addition to a variety of ground-based remote-sensing instruments, numerous rawinsondes were released at one- to two-hourly intervals from six closely spaced sites. The Met Office weather radar network and Meteosat satellite imagery were used to provide context for the observations made by the instruments deployed during CSIP.
This article presents an overview of the CSIP field campaign and examples from CSIP of the types of convective initiation phenomena that are typical in the United Kingdom. It shows the way in which certain kinds of observational data are able to reveal these phenomena and gives an explanation of how the analyses of data from the field campaign will be used in the development of an improved very high resolution NWP model for operational use.
The Convective Storm Initiation Project (CSIP) is an international project to understand precisely where, when, and how convective clouds form and develop into showers in the mainly maritime environment of southern England. A major aim of CSIP is to compare the results of the very high resolution Met Office weather forecasting model with detailed observations of the early stages of convective clouds and to use the newly gained understanding to improve the predictions of the model.
A large array of ground-based instruments plus two instrumented aircraft, from the U.K. National Centre for Atmospheric Science (NCAS) and the German Institute for Meteorology and Climate Research (IMK), Karlsruhe, were deployed in southern England, over an area centered on the meteorological radars at Chilbolton, during the summers of 2004 and 2005. In addition to a variety of ground-based remote-sensing instruments, numerous rawinsondes were released at one- to two-hourly intervals from six closely spaced sites. The Met Office weather radar network and Meteosat satellite imagery were used to provide context for the observations made by the instruments deployed during CSIP.
This article presents an overview of the CSIP field campaign and examples from CSIP of the types of convective initiation phenomena that are typical in the United Kingdom. It shows the way in which certain kinds of observational data are able to reveal these phenomena and gives an explanation of how the analyses of data from the field campaign will be used in the development of an improved very high resolution NWP model for operational use.
