Search Results
You are looking at 1 - 3 of 3 items for
- Author or Editor: David C. Welsh x
- Refine by Access: All Content x
A new millimeter-wave cloud radar (MMCR) has been designed to provide detailed, long-term observations of nonprecipitating and weakly precipitating clouds at Cloud and Radiation Testbed (CART) sites of the Department of Energy's Atmospheric Radiation Measurement (ARM) program. Scientific requirements included excellent sensitivity and vertical resolution to detect weak and thin multiple layers of ice and liquid water clouds over the sites and long-term, unattended operations in remote locales. In response to these requirements, the innovative radar design features a vertically pointing, single-polarization, Doppler system operating at 35 GHz (Ka band). It uses a low-peak-power transmitter for long-term reliability and high-gain antenna and pulse-compressed waveforms to maximize sensitivity and resolution. The radar uses the same kind of signal processor as that used in commercial wind profilers. The first MMCR began operations at the CART in northern Oklahoma in late 1996 and has operated continuously there for thousands of hours. It routinely provides remarkably detailed images of the ever-changing cloud structure and kinematics over this densely instrumented site. Examples of the data are presented. The radar measurements will greatly improve quantitative documentation of cloud conditions over the CART sites and will bolster ARM research to understand how clouds impact climate through their effects on radiative transfer. Millimeter-wave radars such as the MMCR also have potential applications in the fields of aviation weather, weather modification, and basic cloud physics research.
A new millimeter-wave cloud radar (MMCR) has been designed to provide detailed, long-term observations of nonprecipitating and weakly precipitating clouds at Cloud and Radiation Testbed (CART) sites of the Department of Energy's Atmospheric Radiation Measurement (ARM) program. Scientific requirements included excellent sensitivity and vertical resolution to detect weak and thin multiple layers of ice and liquid water clouds over the sites and long-term, unattended operations in remote locales. In response to these requirements, the innovative radar design features a vertically pointing, single-polarization, Doppler system operating at 35 GHz (Ka band). It uses a low-peak-power transmitter for long-term reliability and high-gain antenna and pulse-compressed waveforms to maximize sensitivity and resolution. The radar uses the same kind of signal processor as that used in commercial wind profilers. The first MMCR began operations at the CART in northern Oklahoma in late 1996 and has operated continuously there for thousands of hours. It routinely provides remarkably detailed images of the ever-changing cloud structure and kinematics over this densely instrumented site. Examples of the data are presented. The radar measurements will greatly improve quantitative documentation of cloud conditions over the CART sites and will bolster ARM research to understand how clouds impact climate through their effects on radiative transfer. Millimeter-wave radars such as the MMCR also have potential applications in the fields of aviation weather, weather modification, and basic cloud physics research.
Abstract
Observations of cirrus and altocumulus clouds during the First International Satellite Cloud Climatology Project Regional Experiment (FIRE) are compared to theoretical models of cloud radiative properties. Three tests are performed. First, Landsat radiances are used to compare the relationship between nadir reflectance at 0.83 μm and beam emittance at 11.5 μm with that predicted by model calculations using spherical and nonspherical phase functions. Good agreement is found between observations and theory when water droplets dominate. Poor agreement is found when ice particles dominate, especially if scattering phase functions for spherical particles am used. Even when compared to a laboratory measured ice particle phase function (Volkovitskiy et al. 1980), the observations show increased side scattered radiation relative to the theoretical calculations. Second, the anisotropy of conservatively scattered radiation is examined using simultaneous multiple-angle views of the cirrus from Landsat and ER-2 aircraft radiometers. Observed anisotropy gives good agreement with theoretical calculations using the laboratory measured ice-particle phase function and poor agreement with a spherical-particle phase function. Third, Landsat radiances at 0.83 μm, 1.65 μm, and 2.21 μm are used to infer particle phase and particle size. For water droplets, good agreement is found with King Air FSSP particle probe measurements in the cloud. For ice particles, the Landsat radiance observations predict an effective radius of 60 μm versus aircraft observations of about 200 μm. It is suggested that this discrepancy may be explained by uncertainty in the imaginary index of ice and by inadequate measurements of small ice particles by microphysical probes.
Abstract
Observations of cirrus and altocumulus clouds during the First International Satellite Cloud Climatology Project Regional Experiment (FIRE) are compared to theoretical models of cloud radiative properties. Three tests are performed. First, Landsat radiances are used to compare the relationship between nadir reflectance at 0.83 μm and beam emittance at 11.5 μm with that predicted by model calculations using spherical and nonspherical phase functions. Good agreement is found between observations and theory when water droplets dominate. Poor agreement is found when ice particles dominate, especially if scattering phase functions for spherical particles am used. Even when compared to a laboratory measured ice particle phase function (Volkovitskiy et al. 1980), the observations show increased side scattered radiation relative to the theoretical calculations. Second, the anisotropy of conservatively scattered radiation is examined using simultaneous multiple-angle views of the cirrus from Landsat and ER-2 aircraft radiometers. Observed anisotropy gives good agreement with theoretical calculations using the laboratory measured ice-particle phase function and poor agreement with a spherical-particle phase function. Third, Landsat radiances at 0.83 μm, 1.65 μm, and 2.21 μm are used to infer particle phase and particle size. For water droplets, good agreement is found with King Air FSSP particle probe measurements in the cloud. For ice particles, the Landsat radiance observations predict an effective radius of 60 μm versus aircraft observations of about 200 μm. It is suggested that this discrepancy may be explained by uncertainty in the imaginary index of ice and by inadequate measurements of small ice particles by microphysical probes.
Abstract
An algorithm to compute the magnitude of humidity gradient profiles from the measurements of the zeroth, first, and second moments of wind profiling radar (WPR) Doppler spectra was developed and tested. The algorithm extends the National Oceanic and Atmospheric Administration (NOAA)/Environmental Technology Laboratory (ETL) Advanced Signal Processing System (SPS), which provides quality control of radar data in the spectral domain for wind profile retrievals, to include the retrieval of humidity gradient profiles. The algorithm uses a recently developed approximate formula for correcting Doppler spectral widths for the spatial and temporal filtering effects. Data collected by a 3-beam 915-MHz WPR onboard the NOAA research vessel Ronald H. Brown (RHB) and a 5-beam 449-MHz WPR developed at the ETL were used in this study. The two datasets cover vastly different atmospheric conditions, with the 915-MHz shipborne system probing the tropical ocean atmosphere and the 449-MHz WPR probing continental winter upslope icing storm in the Colorado Front Range. Vaisala radiosonde measurements of humidity and temperature profiles on board the RHB and the standard National Weather Service (NWS) radiosonde measurements at Stapleton, Colorado, were used for comparisons. The cases chosen represent typical atmospheric conditions and not special atmospheric situations. Results show that using SPS-obtained measurements of the zeroth, first, and second spectral moments provide radar-obtained humidity gradient profiles up to 3 km AGL.
Abstract
An algorithm to compute the magnitude of humidity gradient profiles from the measurements of the zeroth, first, and second moments of wind profiling radar (WPR) Doppler spectra was developed and tested. The algorithm extends the National Oceanic and Atmospheric Administration (NOAA)/Environmental Technology Laboratory (ETL) Advanced Signal Processing System (SPS), which provides quality control of radar data in the spectral domain for wind profile retrievals, to include the retrieval of humidity gradient profiles. The algorithm uses a recently developed approximate formula for correcting Doppler spectral widths for the spatial and temporal filtering effects. Data collected by a 3-beam 915-MHz WPR onboard the NOAA research vessel Ronald H. Brown (RHB) and a 5-beam 449-MHz WPR developed at the ETL were used in this study. The two datasets cover vastly different atmospheric conditions, with the 915-MHz shipborne system probing the tropical ocean atmosphere and the 449-MHz WPR probing continental winter upslope icing storm in the Colorado Front Range. Vaisala radiosonde measurements of humidity and temperature profiles on board the RHB and the standard National Weather Service (NWS) radiosonde measurements at Stapleton, Colorado, were used for comparisons. The cases chosen represent typical atmospheric conditions and not special atmospheric situations. Results show that using SPS-obtained measurements of the zeroth, first, and second spectral moments provide radar-obtained humidity gradient profiles up to 3 km AGL.
