Search Results
You are looking at 1 - 3 of 3 items for
- Author or Editor: M. F. McCabe x
- Refine by Access: All Content x
Abstract
A Land Surface Microwave Emission Model (LSMEM) is used to derive soil moisture estimates over Iowa during the Soil Moisture Experiment 2002 (SMEX02) field campaign, using brightness temperature data from the Advanced Microwave Sounding Radiometer (AMSR)-E satellite. Spatial distributions of the near-surface soil moisture are produced using the LSMEM, with data from the North American Land Data Assimilation System (NLDAS), vegetation and land surface parameters estimated through recent Moderate Imaging Spectroradiometer (MODIS) land surface products, and standard soil datasets. To assess the value of soil moisture estimates from the 10.7-GHz X-band sensor on the AMSR-E instrument, retrievals are evaluated against ground-based sampling and soil moisture estimates from the airborne Polarimetric Scanning Radiometer (PSR) operating at C band. The PSR offers high-resolution detail of the soil moisture distribution, which can be used to analyze heterogeneity within the scale of the AMSR-E pixel. Preliminary analysis indicates that retrievals from the AMSR-E instrument at 10.7 GHz using the LSMEM are surprisingly robust, with accuracies within 3% vol/vol compared with in situ samples. Results from these AMSR-E comparisons also indicate potential in determining soil moisture patterns over regional scales, even in the presence of vegetation. Assessment of soil moisture determined through local-scale sampling within the larger-scale AMSR-E footprint reveals a consistent level of agreement over a range of meteorological and surface conditions, offering promise for improved land surface hydrometeorological characterization.
Abstract
A Land Surface Microwave Emission Model (LSMEM) is used to derive soil moisture estimates over Iowa during the Soil Moisture Experiment 2002 (SMEX02) field campaign, using brightness temperature data from the Advanced Microwave Sounding Radiometer (AMSR)-E satellite. Spatial distributions of the near-surface soil moisture are produced using the LSMEM, with data from the North American Land Data Assimilation System (NLDAS), vegetation and land surface parameters estimated through recent Moderate Imaging Spectroradiometer (MODIS) land surface products, and standard soil datasets. To assess the value of soil moisture estimates from the 10.7-GHz X-band sensor on the AMSR-E instrument, retrievals are evaluated against ground-based sampling and soil moisture estimates from the airborne Polarimetric Scanning Radiometer (PSR) operating at C band. The PSR offers high-resolution detail of the soil moisture distribution, which can be used to analyze heterogeneity within the scale of the AMSR-E pixel. Preliminary analysis indicates that retrievals from the AMSR-E instrument at 10.7 GHz using the LSMEM are surprisingly robust, with accuracies within 3% vol/vol compared with in situ samples. Results from these AMSR-E comparisons also indicate potential in determining soil moisture patterns over regional scales, even in the presence of vegetation. Assessment of soil moisture determined through local-scale sampling within the larger-scale AMSR-E footprint reveals a consistent level of agreement over a range of meteorological and surface conditions, offering promise for improved land surface hydrometeorological characterization.
Abstract
Moderate Resolution Imaging Spectroradiometer (MODIS)-derived vegetation fraction data were used to update the boundary conditions of the advanced research Weather Research and Forecasting (WRF) Model to assess the influence of realistic vegetation cover on climate simulations in southeast Australia for the period 2000–08. Results show that modeled air temperature was improved when MODIS data were incorporated, while precipitation changes little with only a small decrease in the bias. Air temperature changes in different seasons reflect the variability of vegetation cover well, while precipitation changes have a more complicated relationship to changes in vegetation fraction. Both MODIS and climatology-based simulation experiments capture the overall precipitation changes, indicating that precipitation is dominated by the large-scale circulation, with local vegetation changes contributing variations around these.
Simulated feedbacks between vegetation fraction, soil moisture, and drought over southeast Australia were also investigated. Results indicate that vegetation fraction changes lag precipitation reductions by 6–8 months in nonarid regions. With the onset of the 2002 drought, a potential fast physical mechanism was found to play a positive role in the soil moisture–precipitation feedback, while a slow biological mechanism provides a negative feedback in the soil moisture–precipitation interaction on a longer time scale. That is, in the short term, a reduction in soil moisture leads to a reduction in the convective potential and, hence, precipitation, further reducing the soil moisture. If low levels of soil moisture persist long enough, reductions in vegetation cover and vigor occur, reducing the evapotranspiration and thus reducing the soil moisture decreases and dampening the fast physical feedback. Importantly, it was observed that these feedbacks are both space and time dependent.
Abstract
Moderate Resolution Imaging Spectroradiometer (MODIS)-derived vegetation fraction data were used to update the boundary conditions of the advanced research Weather Research and Forecasting (WRF) Model to assess the influence of realistic vegetation cover on climate simulations in southeast Australia for the period 2000–08. Results show that modeled air temperature was improved when MODIS data were incorporated, while precipitation changes little with only a small decrease in the bias. Air temperature changes in different seasons reflect the variability of vegetation cover well, while precipitation changes have a more complicated relationship to changes in vegetation fraction. Both MODIS and climatology-based simulation experiments capture the overall precipitation changes, indicating that precipitation is dominated by the large-scale circulation, with local vegetation changes contributing variations around these.
Simulated feedbacks between vegetation fraction, soil moisture, and drought over southeast Australia were also investigated. Results indicate that vegetation fraction changes lag precipitation reductions by 6–8 months in nonarid regions. With the onset of the 2002 drought, a potential fast physical mechanism was found to play a positive role in the soil moisture–precipitation feedback, while a slow biological mechanism provides a negative feedback in the soil moisture–precipitation interaction on a longer time scale. That is, in the short term, a reduction in soil moisture leads to a reduction in the convective potential and, hence, precipitation, further reducing the soil moisture. If low levels of soil moisture persist long enough, reductions in vegetation cover and vigor occur, reducing the evapotranspiration and thus reducing the soil moisture decreases and dampening the fast physical feedback. Importantly, it was observed that these feedbacks are both space and time dependent.
Abstract
The Surface Energy Balance System (SEBS) model was developed to estimate land surface fluxes using remotely sensed data and available meteorology. In this study, a dual assessment of SEBS is performed using two independent, high-quality datasets that are collected during the Soil Moisture–Atmosphere Coupling Experiment (SMACEX). The purpose of this comparison is twofold. First, using high-quality local-scale data, model-predicted surface fluxes can be evaluated against in situ observations to determine the accuracy limit at the field scale using SEBS. To accomplish this, SEBS is forced with meteorological data derived from towers distributed throughout the Walnut Creek catchment. Flux measurements from 10 eddy covariance systems positioned on these towers are used to evaluate SEBS over both corn and soybean surfaces. These data allow for an assessment of modeled fluxes during a period of rapid vegetation growth and varied hydrometeorology. Results indicate that SEBS can predict evapotranspiration with accuracies approaching 10%–15% of that of the in situ measurements, effectively capturing the temporal development of surface flux patterns for both corn and soybean, even when the evaporative fraction ranges between 0.50 and 0.90. Second, utilizing high-resolution remote sensing data and operational meteorology, a catchment-scale examination of model performance is undertaken. To extend the field-based assessment of SEBS, information derived from the Landsat Enhanced Thematic Mapper (ETM) and data from the North American Land Data Assimilation System (NLDAS) were combined to determine regional surface energy fluxes for a clear day during the field experiment. Results from this analysis indicate that prediction accuracy was strongly related to crop type, with corn predictions showing improved estimates compared to those of soybean. Although root-mean-square errors were affected by the limited number of samples and one poorly performing soybean site, differences between the mean values of observations and SEBS Landsat-based predictions at the tower sites were approximately 5%. Overall, results from this analysis indicate much potential toward routine prediction of surface heat fluxes using remote sensing data and operational meteorology.
Abstract
The Surface Energy Balance System (SEBS) model was developed to estimate land surface fluxes using remotely sensed data and available meteorology. In this study, a dual assessment of SEBS is performed using two independent, high-quality datasets that are collected during the Soil Moisture–Atmosphere Coupling Experiment (SMACEX). The purpose of this comparison is twofold. First, using high-quality local-scale data, model-predicted surface fluxes can be evaluated against in situ observations to determine the accuracy limit at the field scale using SEBS. To accomplish this, SEBS is forced with meteorological data derived from towers distributed throughout the Walnut Creek catchment. Flux measurements from 10 eddy covariance systems positioned on these towers are used to evaluate SEBS over both corn and soybean surfaces. These data allow for an assessment of modeled fluxes during a period of rapid vegetation growth and varied hydrometeorology. Results indicate that SEBS can predict evapotranspiration with accuracies approaching 10%–15% of that of the in situ measurements, effectively capturing the temporal development of surface flux patterns for both corn and soybean, even when the evaporative fraction ranges between 0.50 and 0.90. Second, utilizing high-resolution remote sensing data and operational meteorology, a catchment-scale examination of model performance is undertaken. To extend the field-based assessment of SEBS, information derived from the Landsat Enhanced Thematic Mapper (ETM) and data from the North American Land Data Assimilation System (NLDAS) were combined to determine regional surface energy fluxes for a clear day during the field experiment. Results from this analysis indicate that prediction accuracy was strongly related to crop type, with corn predictions showing improved estimates compared to those of soybean. Although root-mean-square errors were affected by the limited number of samples and one poorly performing soybean site, differences between the mean values of observations and SEBS Landsat-based predictions at the tower sites were approximately 5%. Overall, results from this analysis indicate much potential toward routine prediction of surface heat fluxes using remote sensing data and operational meteorology.
