## 1. Introduction

In a massive computing environment, the parallel scalability that a numerical method can guarantee is a primary issue in developing the dynamical core for atmospheric modeling. If used effectively, a huge computing resource can allow us to achieve a resolution under which decoupling between global and regional modeling is not required, and a seamless approach to unified atmospheric modeling is possible. The spectral element method (SEM) using cubed-sphere grids (CSGs) is a highly scalable numerical method (Taylor et al. 1997; Fournier et al. 2004). Communication within each element is global; nonetheless, the elements need only boundary information from their neighboring elements for parallel computing. If each processor of a parallel system handles a minimal number of elements, the communication overhead becomes remarkably low (Dennis et al. 2005).

SEM has been applied primarily to climate simulations for atmospheric applications (Evans et al. 2013). Using an atmospheric numerical model for numerical weather prediction requires an adequate data assimilation system (Klinker et al. 2000; Rawlins et al. 2007). If a data assimilation system applicable to atmospheric numerical models using SEM is developed, we can expect SEM to be used also to build a high-resolution numerical weather prediction system.

Identification and modeling of the covariance matrix of background errors are critical tasks in data assimilation. Spectral transformations often function as horizontal filtering of background-error correlations (Courtier et al. 1998; Lorenc et al. 2000). To apply the Fourier and Legendre transformations to the fields on a CSG, however, we must interpolate the CSG variables onto a Gaussian grid (Temperton 1991). The interpolation yields numerical errors and data redistributions on multiple memory units. We thus devised a spectral transformation method for a CSG using equiangular coordinates (CSGEA), abbreviated as STCS in this work.

A formulation of STCS is derived in section 2, based on calculus on CSGEA, a nonorthogonal coordinate, given in the appendixes. STCS is based on the representativeness of the spherical harmonic functions (SHFs) by CSG points. For the SHFs represented on the CSG points to be proper bases for a spectral transformation, they must be the eigenfunctions of the Laplace operator defined on the CSGEA. We verified the validity of the STCS methodology by comparing the estimated eigenvalues with analytical eigenvalues of the Laplace operator. The relevant results are delineated in section 3. We designed a cost function for a three-dimensional variational data assimilation system (3DVAR) using STCS as one of the components of a background-error covariance model for the 3DVAR. The formulations and the experimental results are shown in section 4. In section 5, we summarize the proposed methodology and the relevant results, and we address future works, including development possibilities of the STCS.

## 2. Formulation of STCS

To use a CSGEA for this work, we followed the explanation of calculus on CSGEA provided by Levy et al. (2009) as arranged in appendixes A and B. In this study, we chose equiangular coordinates, because they provide a more uniformly spaced grid compared to an equidistant projection (Rančić et al. 1996).

*a*(λ, θ) and

*b*(λ, θ), in spherical coordinates as

*R*is radius of a sphere, and

*λ*and

*θ*are longitude and latitude, respectively. We obtain the spectral coefficients of an arbitrary function

*f*on the sphere:

*m*and

*l*are the zonal and spherical wavenumbers, respectively. Terms

## 3. Characteristics of STCS

### a. Dependency of the wave representation of a CSGEA on the element and the polynomial numbers

*i*and

*j*in element ie obtained by applying the weak Laplace operator,

*f*on the sphere. Similarly to the inner product in spherical coordinates,

*e*as follows:

*=*4 and np with a fixed ne = 16 for the SHF of spherical wavenumber

*l*= 32. The term ne varies from 16 to 80 with an interval of 8 for np = 4, while np varies from 4 to 16 for ne = 16. To get the logarithmic value, an

^{−20}has been discarded. The

*l*= 32 are plotted with assignment to the same abscissa, which is represented by the logarithm of the degrees of freedom (DOF) of each CSGEA given by (Fournier et al. 2004)

^{−12}. An average of

Based on the results of Fig. 1a, we can set an accuracy saturation level of wave representation of a CSGEA. If for a CSGEA with a combination of ne and np we get a spherical wavenumber *l* for which a CSGEA has ^{−11}, then *l* − 1 is defined as the accuracy-saturated spherical wavenumber for the CSGEA. Figure 1b explicitly supports the conclusion that the use of a higher np and a lower ne given the same DOF improves the ability of the CSGEA to represent the SHF. While increasing np can cause the CSGEA to resolve more SHFs at an accuracy saturation level, increasing ne is weakly effective in improving a CSGEA up to the accuracy limit. The accuracy-saturated spherical wavenumber is approximately proportional to

### b. Dependency of the wave representation of a CSGEA on the zonal and spherical wavenumbers

When ne =16 and np = 4, Fig. 2a shows the errors of estimated eigenvalues of the CSGEA for various zonal wavenumbers at fixed spherical wavenumbers and also for various spherical wavenumbers at fixed zonal wavenumbers. Wave representativeness of a CSGEA tends to depend on the spherical wavenumber, in other words how well it resolves the associated Legendre polynomials. It is possible that this result is related to the irregularity in the positions of the roots of the associated Legendre polynomials.

(a) Errors of estimated eigenvalues of the CSGEA for various zonal wavenumbers at fixed spherical wavenumbers and also for various spherical wavenumbers at fixed zonal wavenumbers. (b) Errors in estimating the eigenvalue of the Laplace operator for (left) fixed *m* = 0 and (right) *l* = 64 with ne = 16, 32, and 48 for fixed np = 4, and np = 4, 7, and 10 for fixed ne = 16 for which corresponding DOFs are 13 826, 55 298, and 124 418, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

(a) Errors of estimated eigenvalues of the CSGEA for various zonal wavenumbers at fixed spherical wavenumbers and also for various spherical wavenumbers at fixed zonal wavenumbers. (b) Errors in estimating the eigenvalue of the Laplace operator for (left) fixed *m* = 0 and (right) *l* = 64 with ne = 16, 32, and 48 for fixed np = 4, and np = 4, 7, and 10 for fixed ne = 16 for which corresponding DOFs are 13 826, 55 298, and 124 418, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

(a) Errors of estimated eigenvalues of the CSGEA for various zonal wavenumbers at fixed spherical wavenumbers and also for various spherical wavenumbers at fixed zonal wavenumbers. (b) Errors in estimating the eigenvalue of the Laplace operator for (left) fixed *m* = 0 and (right) *l* = 64 with ne = 16, 32, and 48 for fixed np = 4, and np = 4, 7, and 10 for fixed ne = 16 for which corresponding DOFs are 13 826, 55 298, and 124 418, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The cases corresponding to *m* = 0 and *l* = 64 are shown in Fig. 2b to look further into the error distribution according to zonal and spherical wavenumbers. We have *m* = 0. This clear dependency of *l*.

When the spherical wavenumber is fixed at 64 with a variable zonal wavenumber, the SHF with *m* = 45 is represented well by the CSGEA relative to *m* = 0. Eigenvalue estimation for zonal wavenumbers greater and less than 45 and −45, respectively, tend to have greater errors. This error distribution is related to geometric positions of CSGEA grids. For example, when ne = 16 and np = 4 for the SHF with *m* = 45 and *l* = 64, the number of waves covered by an element of the CSGEA is about one-half, while the number of waves covered by an element of the CSGEA is about one, for *m* = 64. The CSGEA represents the SHF better as the number of waves covered by an element of the CSGEA decreases. The error distribution over zonal wavenumber is similar regardless of the change of configurations. Improving the estimation by increasing np is much more effective than by increasing ne also in the error distribution according to zonal wavenumber.

In Fig. 2b, the values of *m* values of different signs are asymmetric around *m* = 0. To look into this phenomenon, we investigated the horizontal maps of a CSGEA with ne = 32 and np = 4 for *m* = 2 and *l* = 64 (Fig. 3). While the parts of the SHF with the biggest amplitude with *m* = 2 are located on the centers of the four cube faces passing through the equator, those of the SHF with *m* = −2 are on the edges (not shown) because a different sign of *m* implies a π/2 shift in *λ*. While the edge has the least value of the determinant of the metric tensor *m* in Fig. 2b can be explained also by the reasoning that the CSGEA represents the SHF better as the number of waves covered by an element of the CSGEA decreases.

The spherical harmonic functions with *m* = 2 and *l* = 64 when ne = 32 and np = 4. The small dots are the grid points of the cubed sphere.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The spherical harmonic functions with *m* = 2 and *l* = 64 when ne = 32 and np = 4. The small dots are the grid points of the cubed sphere.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The spherical harmonic functions with *m* = 2 and *l* = 64 when ne = 32 and np = 4. The small dots are the grid points of the cubed sphere.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

Therefore, the representativeness of a CSGEA can be expected to depend somewhat on the kind of map projection. The evaluation and comparison of a CSG with projections other than equiangular projection, such as equidistance central projection, might be an interesting research topic (Nair et al. 2005).

## 4. Application of STCS to 3DVAR development

### a. Formulation of a 3DVAR using STCS (STCS-3DVAR)

#### 1) A formulation of a background-error covariance model using STCS

*U*,

*V*,

*T*,

*Q*, and Ps are the zonal and the meridional winds, the air temperature, the specific humidity, and the surface pressure, respectively. The indices nk and ns are the number of vertical levels and the number of samples to generate a background-error covariance

^{−1}, simply using the following synthesis process:

*M*and

*L*are the largest zonal and spherical wavenumbers, respectively. Now we can write a background-error correlation matrix in the spectral space as follows:

**w**, the control variable for the STCS-3DVAR:

**w**can be inverted as follows:

#### 2) Designing and minimizing a cost function defined by STCS

*H*is a vector-valued observation operator with

*J*consists of the measurement

*J*, the minimization process for

*J*is performed by solving the following linear system:

### b. Experimental setting to test the STCS-3DVAR

To evaluate the STCS-3DVAR, observing system simulation experiments (OSSEs) were conducted using the Community Atmosphere Model with Spectral Element dynamical core (CAM-SE) with ne = 16 and np = 4 (Evans et al. 2013). We assumed that the model run of CAM-SE with a year spinup using a default initial condition obtained from the website of the Community Earth System Model (available online at http://www.cesm.ucar.edu/models/cesm1.0/cam) is true and designated as “nature.” The number of vertical levels of the CAM-SE is 30, with the model top equaling approximately 3.6 hPa. The rank of the spectral background-error correlation matrix *l* and the zonal wavenumber *m*.

We used 122 forecast difference samples every 18 h from March to May for the static background-error covariance. The forecast difference is the subtraction of the nature run from a 6-h forecast. To add an error to the initial condition, we used the nature runs averaged at −24, 0, and 24 h from initial time with weights of 0.13, 0.74, and 0.13, respectively.

We have assimilated OSSE radiosonde and surface pressure observations using STCS-3DVAR with the static background-error covariance previously obtained. Figure 4 represents 671 radiosonde stations and 4871 surface observation stations chosen for gathering data in the National Centers for Environmental Prediction (NCEP) binary universal form (BUFR) data. We assume that every radiosonde has 30 vertical levels that are the same as those of the nature run. The zonal wind (*U*), meridional wind (*V*), temperature (*T*), and specific humidity (*Q*) of the nature run have been horizontally interpolated into radiosonde location at each model level. Similarly, surface pressure (Ps) has been horizontally interpolated into surface observation locations. To conduct the horizontal interpolation from the CSGEA to the observation positions, we first projected the model state into a cube, which is rectangular, and then conducted the bilinear interpolation using the distance in the Cartesian coordinates (Nair et al. 2005). After the interpolation, Gaussian random errors with zero means, and standard deviations, 0.8 m s^{−1}, 0.8 m s^{−1}, 0.5 K, 0.05 kg kg^{−1}, and 0.8 hPa, were added into the variables *U*, *V*, *T*, *Q*, and Ps, respectively.

The horizontal distribution of radiosonde stations and surface observations used for the STCS-3DVAR experiments. The total numbers of radiosonde stations (black) and surface observations (gray) are 671 and 4871, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The horizontal distribution of radiosonde stations and surface observations used for the STCS-3DVAR experiments. The total numbers of radiosonde stations (black) and surface observations (gray) are 671 and 4871, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The horizontal distribution of radiosonde stations and surface observations used for the STCS-3DVAR experiments. The total numbers of radiosonde stations (black) and surface observations (gray) are 671 and 4871, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

To see a performance of the STCS-3DVAR and its effect in forecasts, eight cases from 0000 UTC 10 March to 1800 UTC 11 March were selected, and the 6-h forecasts at those times were used as the background. We diagnosed the results of the analysis at each time and run the CAM-SE model for 72 h with the analyses as initial conditions.

*l*for the STCS, we examined the difference between an original variable of a CAM-SE forecast

*l*= 63. The errors in synthesis processes of

*U*,

*V*, and

*Q*are larger than those of

*T*and Ps. Based on the result of this synthesis process and the previous test of the eigenvalue estimation, for a CSGEA with ne = 16 and np = 4 we used the SHFs of up to

*l*= 63 to examine the STCS-3DVAR.

Base-10 logarithm of the root-mean-squared difference (RMSD) normalized by a Euclidean norm of a true value in the synthesis process using the STCS and the inverse STCS for *U*, *V*, *T*, *Q*, and Ps. The configuration of the cubed-sphere grid is ne = 16 and np = 4.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

Base-10 logarithm of the root-mean-squared difference (RMSD) normalized by a Euclidean norm of a true value in the synthesis process using the STCS and the inverse STCS for *U*, *V*, *T*, *Q*, and Ps. The configuration of the cubed-sphere grid is ne = 16 and np = 4.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

Base-10 logarithm of the root-mean-squared difference (RMSD) normalized by a Euclidean norm of a true value in the synthesis process using the STCS and the inverse STCS for *U*, *V*, *T*, *Q*, and Ps. The configuration of the cubed-sphere grid is ne = 16 and np = 4.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

### c. Test results of the STCS-3DVAR

#### 1) Structure of a background-error covariance

We first checked the background-error standard deviations (BESDs) on the CSG points *U*, *V*, and *T* are relatively large over the midlatitudes between 30° and 50°N and the ocean near Antarctica, while those of *Q* are large in the tropics for both the upper and lower troposphere (Figs. 6a–h). Meanwhile, the BESDs of Ps have the most similar spatial distribution with lower-tropospheric temperature BESDs (Fig. 6i). The horizontal scale difference between upper and lower levels is not conspicuously large, but the horizontal scale of *T* at level 15 is greater than that at level 24 (Figs. 6e,f). In Fig. 6, model levels 15 and 24 correspond to approximately 274 and 860 hPa, respectively.

Background-error standard deviations (BESDs) of the: horizontal winds (m s^{−1}) (a),(b) zonal and (c),(d) meridional; (e),(f) air temperature (K); (g),(h) specific humidity (kg kg^{−1}), at model levels (left) 24 and (right) 15; and surface pressure (hPa) estimated by the STCS-3DVAR. Model levels 15 and 24 correspond approximately to 274 and 860 hPa, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

Background-error standard deviations (BESDs) of the: horizontal winds (m s^{−1}) (a),(b) zonal and (c),(d) meridional; (e),(f) air temperature (K); (g),(h) specific humidity (kg kg^{−1}), at model levels (left) 24 and (right) 15; and surface pressure (hPa) estimated by the STCS-3DVAR. Model levels 15 and 24 correspond approximately to 274 and 860 hPa, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

Background-error standard deviations (BESDs) of the: horizontal winds (m s^{−1}) (a),(b) zonal and (c),(d) meridional; (e),(f) air temperature (K); (g),(h) specific humidity (kg kg^{−1}), at model levels (left) 24 and (right) 15; and surface pressure (hPa) estimated by the STCS-3DVAR. Model levels 15 and 24 correspond approximately to 274 and 860 hPa, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The diagonal entries of the background-error correlation matrix, *U*, *V*, *T*, and *Q*. The autocorrelations are summated over *l*. In Fig. 7, the zonal wind at level 15 (U15) has a smaller autocorrelation for both low and high wavenumber components compared to level 24 (U24) and is concentrated on wavenumber 11. The temperature at level 15 (T15) has more components for low wavenumbers than the temperature at level 24 (T24), as shown in Figs. 6e,f. On the other hand, the specific humidity has the largest number of high-frequency waves among all the variables, as shown in the BESD and the autocorrelation (Figs. 6g,h and 7).

The autocorrelations represented in spectral space *U*), the meridional wind (*V*), the air temperature (*T*), and the specific humidity (*Q*) at the model levels 24 and 15. The autocorrelation were summed over zonal wavenumbers with the same spherical wavenumber.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The autocorrelations represented in spectral space *U*), the meridional wind (*V*), the air temperature (*T*), and the specific humidity (*Q*) at the model levels 24 and 15. The autocorrelation were summed over zonal wavenumbers with the same spherical wavenumber.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The autocorrelations represented in spectral space *U*), the meridional wind (*V*), the air temperature (*T*), and the specific humidity (*Q*) at the model levels 24 and 15. The autocorrelation were summed over zonal wavenumbers with the same spherical wavenumber.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The variable indices 0–29, 30–59, 60–89, and 90–119 in Fig. 8 stand for *U*, *V*, *T*, and *Q*, respectively, at the model levels 1–30. The variable index 120 is Ps. The background-error correlation matrix for the spherical wavenumber (*l*) equal to 1 and the zonal wavenumber (*m*) equal to 0, *U* and *T* (Fig. 8). Note that there are strong variations in the vertical correlation near the vertical level 16 (≈322 hPa), which is close to the tropopause in the high-latitude region.

The spectral error correlation matrix *l*) equal to 1 with the zonal wavenumber (*m*) equal to 0. The variable indices 0–29, 30–59, 60–89, and 90–119 denote the zonal wind, meridional wind, air temperature, and specific humidity at the model levels 1–30, respectively. The variable index 120 denotes the surface pressure.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The spectral error correlation matrix *l*) equal to 1 with the zonal wavenumber (*m*) equal to 0. The variable indices 0–29, 30–59, 60–89, and 90–119 denote the zonal wind, meridional wind, air temperature, and specific humidity at the model levels 1–30, respectively. The variable index 120 denotes the surface pressure.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The spectral error correlation matrix *l*) equal to 1 with the zonal wavenumber (*m*) equal to 0. The variable indices 0–29, 30–59, 60–89, and 90–119 denote the zonal wind, meridional wind, air temperature, and specific humidity at the model levels 1–30, respectively. The variable index 120 denotes the surface pressure.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

#### 2) Cost function minimization

It is shown in Fig. 9 that minimization by the conjugate gradient method is performed successfully. The continuous decrease of

The cost function values normalized by the initial value of the cost function *J* in the STSC-3DVAR test as a function of the iteration number. The quantity *J* related with observations and

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The cost function values normalized by the initial value of the cost function *J* in the STSC-3DVAR test as a function of the iteration number. The quantity *J* related with observations and

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The cost function values normalized by the initial value of the cost function *J* in the STSC-3DVAR test as a function of the iteration number. The quantity *J* related with observations and

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

#### 3) Error reduction in analysis

Figure 10 shows the background error that deviates from nature and the error reduction due to data assimilation at model level 24 for *U*, *V*, *T*, and *Q* at 0000 UTC 10 March. Background errors of *U*, *V*, and *T* are relatively large over the North Pacific and the ocean near Antarctica, which are similar to the BESD (Fig. 6). While the background error of *U* has a dipole structure with positive (negative) deviation over north (south) Kamchatka Peninsula (Fig. 10a), the error reduction has the same structure, but with both cores being positive. That indicates that the analysis increment is negatively correlated with the background error, hence, the analysis error is less than the background error (Fig. 10b). The error reduction of *V* is even bigger than *U* (Fig. 10d). While the greater parts of the temperature error and the horizontal wind reduction are positive, a distinct negative background error of temperature was found around Tasmania in Australia (Fig. 10e). It was captured well as an analysis increment with the opposite sign, thus, the error reduction around this area is significantly larger than others (Fig. 10f). As the background of specific humidity is distributed over tropical and low-latitudinal regions, the error reduction at high latitude was not obvious. Dense observation regions such as Europe, East Asia, and North America have positive error reductions (Fig. 10g) but the error reduction is mostly neutral over the Pacific Ocean because of a lack of *Q* observation (Fig. 10h).

(left) The background error and (right) the error reduction that is the subtraction of the absolute value of the analysis error from that of the background error for (top to bottom) the zonal and meridional winds, air temperature, and specific humidity at model level 24 at 0000 UTC 10 Mar.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

(left) The background error and (right) the error reduction that is the subtraction of the absolute value of the analysis error from that of the background error for (top to bottom) the zonal and meridional winds, air temperature, and specific humidity at model level 24 at 0000 UTC 10 Mar.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

(left) The background error and (right) the error reduction that is the subtraction of the absolute value of the analysis error from that of the background error for (top to bottom) the zonal and meridional winds, air temperature, and specific humidity at model level 24 at 0000 UTC 10 Mar.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The error reduction is mostly positive for not only low levels but also mid- and upper levels (Fig. 11). The error reductions of horizontal wind are apparent in zonal bands 30°–80°N and 40°–60°S and concentrated on about level 15 (Figs. 11a,b). The error reduction of *V* is evidently correlated to that of temperature. In Fig. 11b, the levels of error reduction peak in the Southern and Northern Hemispheres are 14 and 16, respectively. Meanwhile, temperature error reduction has double cores on the same latitude, and levels 14 and 16 cut through upper and lower cores of the temperature error reduction in the Southern and Northern Hemispheres, respectively (Fig. 11c). The error reduction of *Q* did not reach the upper levels, because there is little humidity above model level 20 (Fig. 11d).

The cross section of zonal mean RMSE reduction by the STCS-3DVAR analysis at 0000 UTC 10 Mar. for each (a) *U*, (b) *V*, (c) *T*, and (d) *Q*.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The cross section of zonal mean RMSE reduction by the STCS-3DVAR analysis at 0000 UTC 10 Mar. for each (a) *U*, (b) *V*, (c) *T*, and (d) *Q*.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The cross section of zonal mean RMSE reduction by the STCS-3DVAR analysis at 0000 UTC 10 Mar. for each (a) *U*, (b) *V*, (c) *T*, and (d) *Q*.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The analysis increments of *U* and *V* at level 15 are greater than those at level 24 (Fig. 12). This fact accounts for the greater error reduction at level 15 in Fig. 11 as well. The analysis increments of *U*, *V*, and *T* are dominant at scales of spherical wavenumbers 10–20 (Fig. 12), which is identical to autocorrelation of the background-error covariance (Fig. 7). The majority of analysis increment scales for *Q* are higher spherical wavenumbers greater than 10.

The absolute values of analysis increments at model levels 15 and 24 averaged over the zonal wavenumbers at 0000 UTC 10 Mar. The specific humidity analysis increments at model levels 24 and 15 were multiplied by 10^{4} and 10^{5}, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The absolute values of analysis increments at model levels 15 and 24 averaged over the zonal wavenumbers at 0000 UTC 10 Mar. The specific humidity analysis increments at model levels 24 and 15 were multiplied by 10^{4} and 10^{5}, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

The absolute values of analysis increments at model levels 15 and 24 averaged over the zonal wavenumbers at 0000 UTC 10 Mar. The specific humidity analysis increments at model levels 24 and 15 were multiplied by 10^{4} and 10^{5}, respectively.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

In Fig. 13, we can see that the most severe error of Ps changes to a positive error reduction even on the Southern Ocean (Figs. 13a,b), because the surface observations are distributed well on both hemispheres (Fig. 4).

(a) The background error and (b) the error reduction that is the subtraction of the absolute value of the analysis error from that of the background error for the surface pressure at 0000 UTC 10 Mar.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

(a) The background error and (b) the error reduction that is the subtraction of the absolute value of the analysis error from that of the background error for the surface pressure at 0000 UTC 10 Mar.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

(a) The background error and (b) the error reduction that is the subtraction of the absolute value of the analysis error from that of the background error for the surface pressure at 0000 UTC 10 Mar.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

Figure 14 presents background and analysis RMSEs of *U*, *V*, *T*, *Q*, and Ps for eight experimental cases. All analysis RMSEs are less than background RMSEs for whole variables and cases. Through the STCS-3DVAR, Ps definitely shows the best improvement owing to the dense observations. While the error of *V* is greater than that of *U*, the error reduction is larger in *V*. The STCS-3DVAR shows a fairly good effect on *T*, but minimal effect on *Q*. On the average, RMSE reductions in analysis are 24% and 34% for *U* and *V*, respectively; 20% for *T*; 4% for specific humidity *Q*; and 57% for Ps in the OSSE.

Background and analysis RMSEs for the (a) zonal and meridional winds, (b) air temperature, (c) specific humidity, and (d) surface pressure at eight initial times from 10 to 11 Mar with an interval of 6 h.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

Background and analysis RMSEs for the (a) zonal and meridional winds, (b) air temperature, (c) specific humidity, and (d) surface pressure at eight initial times from 10 to 11 Mar with an interval of 6 h.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

Background and analysis RMSEs for the (a) zonal and meridional winds, (b) air temperature, (c) specific humidity, and (d) surface pressure at eight initial times from 10 to 11 Mar with an interval of 6 h.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

#### 4) Error reduction in forecast

We conducted CAM-SE for 72 h using the analyses as the initial condition. Overall, RMSEs of forecasts are greater than those in Fig. 14, and the RMSEs of forecasts with analyses persist in being less than those of forecasts without analysis (Fig. 15). The RMSE error of the Ps forecast is not dramatically reduced compared to Fig. 14d, but it is still less than the forecast from background. It is noticeable that the difference between errors of *Q* forecasts has been greater than the initial (Fig. 15c). In summary, RMSE reductions in the 72-h forecast fields are 28% and 27% for *U* and *V*, respectively; 25% for *T*; 21% for *Q*; and 31% for Ps in the OSSE. It seems that the STCS-3DVAR has been assimilating observation data with the background well, and also maintaining the model’s balance.

RMSEs of 72-h forecasts from background and analysis for the (a) zonal and meridional winds, (b) air temperature, (c) specific humidity, and (d) surface pressure. The numbers on the *x* axis denote initial dates for model forecasts.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

RMSEs of 72-h forecasts from background and analysis for the (a) zonal and meridional winds, (b) air temperature, (c) specific humidity, and (d) surface pressure. The numbers on the *x* axis denote initial dates for model forecasts.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

RMSEs of 72-h forecasts from background and analysis for the (a) zonal and meridional winds, (b) air temperature, (c) specific humidity, and (d) surface pressure. The numbers on the *x* axis denote initial dates for model forecasts.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

## 5. Summary and discussion

Atmospheric numerical models using the spectral element method with a CSG are very scalable in terms of parallelization. However, for the spectral element numerical models to be the next-generation numerical weather prediction mode systems, corresponding data assimilation systems must be developed. As part of meeting such a need, we developed STCS. To devise STCS, we used SHFs represented on the CSG points and the spectral element method using equiangular coordinates, which give a more uniformly spaced grid compared to an equidistant projection (Rančić et al. 1996).

To examine the accuracy of the method, we used the eigenvalues of the Laplace operator defined in a CSGEA. Given that DOF, Eq. (22), is the same, a CSGEA with small ne and large np can represent SHFs better than a CSGEA with large ne and small np. The wave representativeness of a CSGEA tends to depend on the spherical wavenumber, in other words, how well it resolves the associated Legendre polynomials. Probably this result is related to the irregularity in the positions of the roots of the associated Legendre polynomials. One thing to notice is that the STCS occurs in one time step and can be expected to incur a minor cost compared with model integrations. The choice of np and ne is primarily dictated by model integration efficiency. Using large np and small ne would be suboptimal for parallelization and increase of time step size. Thus comparison experiments for variable np have been performed with small sizes of np, even less than four (Lauritzen et al. 2014). This paper raises the question of which ne and np are the most efficient choice for weather prediction modeling using CSGs including a data assimilation step.

In the OSSE using STCS-3DVAR, we observed root-mean-squared error reductions in analysis, 24% and 34% for *U* and *V*, respectively; 20% for *T*; 4% for *Q*; and 57% for Ps. The Ps definitely shows the most improvement owing to the dense observations. While the error of *V* is greater than that of *U*, the error reduction is greater in *V*. The STCS-3DVAR shows fairly good effect on *T* but minimal effect on *Q*. We conducted CAM-SE for 72 h using the analyses as the initial conditions. Root-mean-squared error reductions in 72-h forecast fields were 28% and 27% for *U* and *V*, respectively; 25% for *T*; 21% for *Q*; and 31% for Ps. The RMSE error of the Ps forecast is not dramatically reduced compared to Fig. 14d, but it was still less than the forecast from the background. It is noticeable that the difference between errors of *Q* forecasts was greater than the initial (Fig. 15c). It seems the STCS-3DVAR has been assimilating observation data with the background well, and also maintains the model’s balance.

Provided that the number of grid points over one side of a rectangular model domain is *N*, the proposed spectral transformation method requires approximately

## Acknowledgments

The authors are very grateful to Dr. Aimé Fournier and two anonymous reviewers for invaluable comments for improving this paper. Dr. Ji-Sun Kang supplied the CAM-SE run results, and Dr. In-Sun Song provided helpful comments about the characteristics of spherical harmonic functions represented on a CSG. Dr. Sang-Yoon Jun provided the parallel I/O modules for the STCS-3DVAR, and Dr. Mark Taylor provided a reference code that helped the authors familiarize themselves with the spectral element method using a CSG. The first author received supplemental support from the Basic Science Research Program of the National Research Foundation of Korea (NRF) funded by the Ministry of Education (2014R1A6A3A03059247).

## APPENDIX A

### Definition of Areal Integration on the Cubed Sphere Using Equiangular Coordinates

A cubed sphere consists of six curved surfaces covering a sphere, with approximately equal spherical quadrilateral elements on each cube face (Fig. A1a). We call the number of elements on one side of a cube face the index ne and the number of grid points on one side of an element the index np. In Fig. A1, the index ne is equal to 4, and the index np is equal to 6.

(a) An illustrative description of the cubed-sphere grid adopted from Levy et al. (2009). In this case, the number of the elements over one side of a cube face ne is equal to 4, and the number of the grid points over one side of an element np is equal to 6. (b) An illustrative description of the equiangular coordinate system, adopted from Nair (2008). The spherical coordinates *λ* and *θ* denote the longitude and the latitude in a cube face, and *α* and *β* are the equiangular coordinates defined for each cube face with *λ* at the center of cube face and *R* is a radius of sphere.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

(a) An illustrative description of the cubed-sphere grid adopted from Levy et al. (2009). In this case, the number of the elements over one side of a cube face ne is equal to 4, and the number of the grid points over one side of an element np is equal to 6. (b) An illustrative description of the equiangular coordinate system, adopted from Nair (2008). The spherical coordinates *λ* and *θ* denote the longitude and the latitude in a cube face, and *α* and *β* are the equiangular coordinates defined for each cube face with *λ* at the center of cube face and *R* is a radius of sphere.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

(a) An illustrative description of the cubed-sphere grid adopted from Levy et al. (2009). In this case, the number of the elements over one side of a cube face ne is equal to 4, and the number of the grid points over one side of an element np is equal to 6. (b) An illustrative description of the equiangular coordinate system, adopted from Nair (2008). The spherical coordinates *λ* and *θ* denote the longitude and the latitude in a cube face, and *α* and *β* are the equiangular coordinates defined for each cube face with *λ* at the center of cube face and *R* is a radius of sphere.

Citation: Monthly Weather Review 143, 7; 10.1175/MWR-D-14-00089.1

*R*, and the longitude and latitude are

*λ*and

*θ*, respectively, a small displacement on the sphere

*d*

**r**is defined as

*α*and

*β*, are defined according to the position of each cube face. The coordinate

*α*is equal to −π/4 at the left end and π/4 at the right end of a cube face. Another coordinate

*β*varies along the line of a fixed

*α*and is equal to −π/4 at the bottom of a cube face and π/4 at the top. The two unit vectors of the equiangular coordinates are, therefore, nonorthogonal. This coordinate system is, in other words, a curvilinear coordinate system, where the unit vectors,

**v**can be expressed using the contravariant components,

*f*on the CSGEA as

## APPENDIX B

### Element-Based Galerkin Approach to Discretization of an Integration

*n*th-order Legendre polynomial, the Lagrange polynomial in one dimension

*n*= np − 1 (Levy et al. 2009). The variable

*ξ*belongs to an interval [−1, 1], into which for each element,

*α*or

*β*can be affinely transformed in local Cartesian directions

*i*means the

*i*th quadrature grid points over one side of the

*α*direction of an element. The local Gaussian quadrature for each grid point in an element

*f*on the cubed sphere can be approximated as follows:

*j*indicates the

*j*th grid point over one side of the

*β*direction of an element. The tilde accent indicates that a function has been discretized on the CSGEA using this element-based Galerkin method, the spectral element method (Taylor et al. 1997). Because the Lagrange polynomial

*f*on a grid point (

*i*,

*j*) of an element

## REFERENCES

Courant, R., and D. Hilbert, 1962:

*Methods of Mathematical Physics.*Vol. 1. Wiley-Interscience, 560 pp.Courtier, P., and Coauthors, 1998: The ECMWF implementation of three-dimensional variational assimilation (3D-Var). I: Formulation.

,*Quart. J. Roy. Meteor. Soc.***124**, 1783–1807, doi:10.1002/qj.49712455002.Dennis, J., A. Fournier, W. F. Spotz, A. St-Cyr, M. A. Taylor, S. J. Thomas, and H. Tufo, 2005: High-resolution mesh convergence properties and parallel efficiency of a spectral element atmospheric dynamical core.

,*Int. J. High Perform. Comput. Appl.***19**, 225–235, doi:10.1177/1094342005056108.Evans, K. J., P. H. Lauritzen, S. K. Mishra, R. B. Neale, M. A. Taylor, and J. J. Tribbia, 2013: AMIP simulation with the CAM4 spectral element dynamical core.

,*J. Climate***26**, 689–709, doi:10.1175/JCLI-D-11-00448.1.Fisher, M., 2003: Background error covariance modelling.

*Proc. Seminar on Recent Development in Data Assimilation for Atmosphere and Ocean,*Reading, United Kingdom, ECMWF, 45–63.Fournier, A., M. A. Taylor, and J. J. Tribbia, 2004: The Spectral Element Atmosphere Model (SEAM): High-resolution parallel computation and localized resolution of regional dynamics.

,*Mon. Wea. Rev.***132**, 726–748, doi:10.1175/1520-0493(2004)132<0726:TSEAMS>2.0.CO;2.Hestenes, M. R., and E. Stiefel, 1952: Methods of conjugate gradients for solving linear systems.

*J. Res. Natl. Bur. Standards,***49**(6), National Bureau of Standards Research Paper 2379, 409–436.Klinker, E., F. Rabier, G. Kelly, and J.-F. Mahfouf, 2000: The ECMWF operational implementation of four-dimensional variational assimilation. III: Experimental results and diagnostics with operational configuration.

,*Quart. J. Roy. Meteor. Soc.***126**, 1191–1215, doi:10.1002/qj.49712656417.Lauritzen, P. H., J. T. Bacmeister, T. Dubos, S. Lebonnois, and M. A. Taylor, 2014: Held–Suarez simulations with the Community Atmosphere Model Spectral Element (CAM-SE) dynamical core: A global axial angular momentum analysis using Eulerian and floating Lagrangian vertical coordinates.

,*J. Adv. Model. Earth Syst.***6**, 129–140, doi:10.1002/2013MS000268.Leith, C. E., 1974: Theoretical skill of Monte Carlo forecasts.

,*Mon. Wea. Rev.***102**, 409–418, doi:10.1175/1520-0493(1974)102<0409:TSOMCF>2.0.CO;2.Levy, M. N., R. D. Nair, and H. M. Tufo, 2009: A high-order element-based Galerkin method for the barotropic vorticity equation.

,*Int. J. Numer. Methods Fluids***59,**1369–1387, doi:10.1002/fld.1874.Lorenc, A. C., and Coauthors, 2000: The Met. Office global three-dimensional variational data assimilation scheme.

,*Quart. J. Roy. Meteor. Soc.***126**, 2991–3012, doi:10.1002/qj.49712657002.Nair, R. D., 2008: Cubed-sphere grids and Galerkin approaches.

*2008 Global Atmospheric Core Workshop,*Boulder, CO, NCAR. [Available online at http://www2.mmm.ucar.edu/projects/global_cores/Nair.pdf.]Nair, R. D., S. J. Thomas, and R. D. Loft, 2005: A discontinuous Galerkin transport scheme on the cubed sphere.

,*Mon. Wea. Rev.***133**, 814–818, doi:10.1175/MWR2890.1.Parrish, D. F., and J. C. Derber, 1992: The National Meteorological Center’s spectral statistical-interpolation analysis system.

,*Mon. Wea. Rev.***120**, 1747–1763, doi:10.1175/1520-0493(1992)120<1747:TNMCSS>2.0.CO;2.Rančić, M., R. Purser, and F. Mesinger, 1996: A global shallow-water model using an expanded spherical cube: Gnomonic versus conformal coordinates.

,*Quart. J. Roy. Meteor. Soc.***122**, 959–982, doi:10.1002/qj.49712253209.Rawlins, F., S. Ballard, K. Bovis, A. Clayton, D. Li, G. Inverarity, A. Lorenc, and T. Payne, 2007: The Met Office global four-dimensional variational data assimilation scheme.

,*Quart. J. Roy. Meteor. Soc.***133**, 347–362, doi:10.1002/qj.32.Taylor, M., J. Tribbia, and M. Iskandarani, 1997: The spectral element method for the shallow water equations on the sphere.

,*J. Comput. Phys.***130**, 92–108, doi:10.1006/jcph.1996.5554.Temperton, C., 1991: On scalar and vector transform methods for global spectral models.

,*Mon. Wea. Rev.***119**, 1303–1307, doi:10.1175/1520-0493-119-5-1303.1.Wedi, N. P., M. Hamrud, and G. Mozdzynski, 2013: A fast spherical harmonics transform for global NWP and climate models.

,*Mon. Wea. Rev.***141**, 3450–3461, doi:10.1175/MWR-D-13-00016.1.